Unit convenor and teaching staff |
Unit convenor and teaching staff
Convenor, Lecturer
Peter Busch
Contact via 9850 9520
E6A 320
Thursday 3-5pm
|
---|---|
Credit points |
Credit points
4
|
Prerequisites |
Prerequisites
16cp in ITEC units at 800 or 900 level and GPA of 2.75
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
Depending upon a candidate's specialist stream, interests and employment circumstances, this unit may comprise literature research, a case study, a software project development, a project sponsored by the candidate's employer, or an industry internship. Candidates are expected to demonstrate initiative and independence in researching, executing and documenting an involved information and communications technology project. As a requirement of this unit students must participate in an ethics workshop and satisfy the related assessment requirements.
|
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
Name | Weighting | Due |
---|---|---|
Project Progress | 5% | As agreed with supervisor. |
Project Description | 10% | Week 2 and 3; Friday noon |
Project Proposal | 15% | Week 4 and 5; Friday noon |
Report Outline | 15% | Week 6 and 9; Friday noon |
Ethics Assignment | 5% | Week 8, Friday noon |
Final Report | 50% | Week 12 & Week 13, Friday noon |
Due: As agreed with supervisor.
Weighting: 5%
You are expected to meet your supervisor every week to discuss your project's progress, starting in Week 1 of teaching. This may be in the form of formal reports to your supervisor by sending emails or informal through face-to-face meetings. At the end of the term, your supervisor will evaluate and mark your progress in the project. This process encourages you to work to a plan, and to actively replan if your schedule slips.
Due: Week 2 and 3; Friday noon
Weighting: 10%
This assignment involves two steps: Reporting and Presentation. The aim here is to get you to collect the important information together in 500 words. First step is Reporting to be submitted in Week 2. Reporting consists of an Abstract, including the following details about your project:
Please ensure that your document is submitted with a filename that has the following format:
So, for example, if I was submitting my report outline, it would have the following filename:
The abstract will be assessed according to the following rubric.
AssessmentThe second step is a Presentation. Your Initial Project Presentation is a four-minute presentation (including one minute for Q&A) you will give in class in Week 3: its function is to ensure that you have established a project and understood what its goals are. It also gives me an idea of your level of ability in making presentations.
This page explains the requirements for the Initial Project Presentation that you are required to submit for ITEC810.
You should submit your Initial Project Presentation, in the form of a PowerPoint file consisting of no more than four slides including your title slide, via the class iLearn website. The limited time we have available means that you will be given four minutes to present your slides in class (and one minute for Q&A).
This assignment has the following aims.
Don't be deceived by the fact that the deliverable for this assignment is only a four-minute presentation: you are expected to put a significant amount of work into its preparation, and you will be assessed on that basis. You must ensure that you have rehearsed your presentation carefully: under no circumstances will you be able to go beyond the allocated four minutes you have for presenting your material. Within that time-frame, your aim is to communicate to the class what problem you are trying to solve, why it is important, and the approach you intend to take.
Make sure your submission meets the following requirements.
Your goal is to communicate an understanding of your project to the audience; bear in mind that your audience is your classmates, and you cannot assume that they will be familiar with your topic area.
Please ensure that your slides are submitted with a file-name that has the following format:
So, for example, if I was submitting my presentation, it would have the following file name:
If you prefer to submit a PDF file, the same instructions as above apply, except that the file-name extension will obviously be different.
The initial Presentation will be assessed according to the following rubric.
Assessment
Due: Week 4 and 5; Friday noon
Weighting: 15%
Your Project Proposal, due in Week 4, is a short document that gives you the opportunity to communicate clearly at the outset of your project the specific problem you are addressing, how you intend to solve it, and what existing resources or materials you will build on; it also requires you to establish a first cut at a detailed plan for achieving your stated outcomes. This kind of planning exercise is essential for success in any project.
This page outlines the requirements for project proposals. The aim here is to get you to collect the important information together in 5-6 pages. Note that this is a piece of work that is expected to take you around 5-6 days of effort, and is the result of you spending some time looking deeply into what is required to carry out your project. In particular, note that it requires you to plan at a more detailed level than you did for the presentation in Week 2. The expectation is that you will spend on the order of 20 hours working on your proposal, so if you are allocating the same amount of time to this unit each week, you will need to have started on this task in week 1.
You should submit via the class iLearn website a 5-6 page project proposal that outlines the background to and objectives of your project, and lays out a plan for how you will achieve these objectives. This should be provided as a PDF document.
You should also provide five or six slides that you will use to give a five-minute presentation on your detailed task plan. Your presentation should begin with a title slide and then a slide that succinctly states the aim of your project; the remaining slides should provide a detailed picture of how you intend to carry out the project.
This assignment has a number of aims.
Make sure your submission meets the following requirements.
In terms of general formatting requirements:
In many ways the Task Plan is the heart of your proposal: it's an explicit commitment to what you intend to do and when. For that reason, it needs to be very specific in a number of regards:
You should factor in the project-related assessable items for the unit as project deliverables, but obviously these should not be the only deliverables. Do not include your ethics assignment in your task plan, since this has nothing to do with your project.
Your Task Plan should be described in detail in your proposal document, but it should also be the focus of the slide presentation you submit along with your proposal. Most people's task plans will consist of four or five high-level tasks, each with some subtasks; you should allocate one slide per high-level task. In the class presentations, your aim will be to convince me that you have thought through the steps involved in your project in significant detail.
Your project proposal is worth 10 marks for Reporting (in Week 4) and 5 marks for Presentation (in Week 5). Please see the Initial Project Presentation Assessment criteria for the assessment of Project Proposal Presentation. Reporting section of Project Proposals will be assessed by the unit convenor according to the following rubric:
Assessment
Due: Week 6 and 9; Friday noon
Weighting: 15%
Report Outline indicates what the proposed structure and content of your final project report will be. This forces you to plan out your final report, and provides a means for obtaining feedback on your final project report before you actually write it; you can think of this as a summary of your final report. The Report Outline is due in Week 6 but Report Outline Presentations take place in Week 9 and Week 10.
You should submit your Report Outline in the form of a 5-10 page PDF document. You should also provide five or six slides that you will use to give a five-minute presentation on your report outline.
This assignment has the following aims.
Your report outline is intended to serve as a plan for your final report, so it's important to think about what that document will contain.
Your final report is likely to contain between five and eight major sections, and so your report outline should reflect that structure. The first section of your final report will be your introduction, and the last will be your conclusions section; what the other sections are depends very much on the specifics of your project, and it is imperative that you discuss the possibilities here with your supervisor.
A good strategy in writing is to tell the reader what you are going to tell them, tell it, and then tell them what you've told them. The first of these elements is what we have also referred to in class as a 'road map' for the document. Translated to the context of your final report, your introductory section is where you provide a road map for the rest of the document, and the conclusions section is where you tell the reader what you have told them in the intervening sections.
You can apply the same structure at the next level down: each major section should begin with a subsection that outlines what the section contains, and ends with a subsection that summarizes what the section has contained and what has been learned as a result.
Given this structure, you can think of your report outline as consisting of these initial subsections of the final report.
Make sure your submitted report outline meets the following requirements.
Please ensure that your document is submitted with a filename that has the following format:
So, for example, if I was submitting my report outline, it would have the following filename:
Your report outline is worth 15 marks. It includes an Abstract worth 5 marks; an Outline worth 5 marks; and and a Presentation that is worth 5 marks. The first two are due in Week 6 and the last one is due by Week 9. The outline will be assessed according to the following rubric. For the assessment of presentation, please see Initial Project Presentation section.
Assessment
The aim of the Abstract Section of the Report Outline is to get you to summarise the most important information together regarding your final project and provide you with some feedback prior to submission of your final report. This is an abstract including the following details about your project:
The abstract should be 150-200 words in length and able to stand alone as a concise and comprehensive description of your project's objectives, approach and outcomes.
Due: Week 8, Friday noon
Weighting: 5%
For this assignment you are required to write a short report (Ethics summary) that allows you to express yourselves about the ethical issues regarding your project. The assignment will be detailed on ilearn.
Please ensure that your Ethics summary is submitted with a filename that has the following format:
So, for example, if I was submitting my Ethics Report, it would have the following filename:
You are expected to read the Australian Computer Society's Code of Ethics and Code of Conduct (https://www.acs.org.au/__data/assets/pdf_file/0004/30964/ACS_Ethics_Case_Studies_v2.1.pdf).
The aim of the exercise is write a report with regard to an ethical situation in IT in the last 6 months. Note that you are not being assessed on your particular views of the situation, so the particular course of action you elect to pursue does not impact on your marks; you are being assessed on your ability to reason clearly about the situation, and on your ability to analyse and discuss the consequences of the Code of Ethics.
The Ethics summary will be assessed according to the following rubric.
Assessment
Due: Week 12 & Week 13, Friday noon
Weighting: 50%
Your Final Report involves two steps: Final Project Presentation and Final Project Report.
Your Final Project Presentation is a verbal summary of the results of your project, which you present at the end of semester workshop.
The ITEC810 End-of-Semester Workshop provides an opportunity for everyone in the class to present the results of their project work carried out during the course of the semester. The workshop will take place in Week 12 from 6pm until 9pm. Because there are many students in the class, the workshop will be organised as two parallel sessions, held in two separate rooms. Each presentation will be allotted 20 minutes including time for questions; typically this will be made up of 15 minutes for the presentation and five minutes for questions.
This page outlines the requirements for your final project presentation, which you will give at the end-of-semester workshop.
No later than the specified deadline, you should submit via the class iLearn website the slides for the end-of-semester presentation. These should provide a summary of
The slides should be provided as a PowerPoint or pdf document.
This assignment has the following aims.
Your presentation at the end of semester workshop will be assessed. Presentations will be 15 minutes long, with a further 5 minutes allocated for questions and changeover between presenters. It is essential that you carefully prepare and rehearse your talk to ensure that it can be delivered within the allotted time. Session chairs have strict instructions to stop you when 15 minutes have elapsed.
Ensure your presentation is submitted with a filename that has the following format:
So, for example, if I was submitting my slides as a PPT file, it would have the following filename:
Remember to revisit the Hints and Tips on Giving Presentations document for a checklist of things to watch out for in preparing and presenting your contribution.
Your final presentation is worth 10 marks, and will be assessed according to the following rubric:
Assessment
Your Final Project Report to be submitted in Week13 is a document of considerable length where you tell the whole story, providing all the details of what you've done and what the outcomes were. This is the major assessable piece of work for the unit.
This page outlines the requirements for your final project report, which is the final written assignment in the unit.
You should submit your final project report via EasyChair (http://www.easychair.org/) that will be open for submission at the end of the semester. Specific link for this purpose will be provided in due course.
The expected length of your report depends on whether you are doing an analysis or a development project: see the table further below.
This document should report in detail on (a) your initial problem specification; (b) relevant related work and background sources; (c) the approach you took to solving the problem; and (d) the outcomes of your work. The report should be provided as a PDF document.
This assignment has the following aims.
Make sure your submission meets the following requirements.
The shorter report length requirement for the latter projects is a consequence of the requirement for these projects also to deliver a working piece of software, which is to be demonstrated to the supervisor's satisfaction at the conclusion of the project.
Please ensure that your final report is submitted with a file-name that has the following format:
So, for example, if I was submitting my final report, it would have the following filename:
Your final report is worth 40 marks. These marks represent not only the written content of your report, but also the project work that underlies it.
Note that for management projects, the report should be more than a literature review, and should provide some real analytical content.
For IS/network/security/web engineering projects, a working demonstration of the constructed software will be a component of the marking. Please take note of the following requirements:
It is not necessary to demonstrate your software during your final presentation, although you may do so if you wish. Note that your supervisor will include an assessment of your software under the assessment attribute of 'Quality of Work Carried Out' in the rubric below, but your second marker will not be able to take your software into account, and so will be relying on the description in your final report to convey the quality of your work.
The final report will be assessed by your supervisor according to the following rubric:
AssessmentITEC810 is taught via seminars and presentations. The feedback that you receive from your supervisor plays also a crucial role in your learning.
Make sure you are completely familiar with the content of the official Unit Outline. You are expected to regularly meet your supervisor by making an appointment. You should also attend all the lectures and presentations.
A significant proportion of the class time in this unit focuses on communication skills, but we don't have the time or space to go into some matters in as much detail as some people would like. If you would like to improve your skills in academic writing, you should check out the Postgraduate Academic Literacy Workshops.
You have many opportunities to seek for and to receive feedback. During seminars, you are encouraged to ask the lecturer questions to clarify anything you might not be sure of. Each week, you will be given assignments to complete. This will at times involved contributing to a group of students and presenting solutions to the class. The comments and the solutions provided will help you to understand the objectives of the unit, prepare you for the work in assignments. It is important that you keep up with these assignments every week.
Websites The web page for this unit can be found at http://www.comp.mq.edu.au/units/itec810.
Discussion Boards The unit makes use of discussion boards hosted within iLearn. Please post questions of general interest there (for example, about assessment tasks), they are monitored by the staff on the unit.
Student Support Services Macquarie University provides a range of Academic Student Support Services. Details of these services can accessed at http://www.student.mq.edu.au.
If you have exhausted all other avenues, then you should consult Director of Postgraduate Program or the Head of Department. You are entitled to have your concerns raised, discussed and resolved.
Technology Used and Required
The written reports and presentations are expected to make use of MS Word, MS Excel and MS Powerpoint (or equivalant). Programming languages and technologies to be used depend on the requirements of the project. You may consult your project supervisor regarding these.
Submission Methods
All assessment task are expected to be submitted on ilearn. In addition to this, Final Report is expected to be submitted on EasyChair conference system.
Extensions
Extensions for the assessments are allowed only in exceptional circumstances. You must discuss this with the unit convenor prior to the submission deadline.
Penalties
Penalties are applied for late submissions. 10% of the total marks for each assignment will deducted for every 24 hours after the submission deadline.
Resubmission
Resubmission of assessment tasks may be allowed in exceptional circumstances. You must discuss this with the unit convenor after the submission deadline.
What to submit
Classes are scheduled for Fridays from 6pm to 9pm, but we will generally meet every second week. (There are consecutive meetings in weeks 9 and 10). The first scheduled class is in Week 1, and the current schedule for all weeks is shown below. Note that this schedule is still provisional, and the particular Fridays we use may change at short notice, depending upon circumstances: so you should be prepared for attendance every Friday during semester.
All classes are held in EMC G230.
On each occasion that we meet, around half of the class time will be in the form of a lecture and discussion session on material that is relevant to an upcoming assessable activity; the other half of the class will be occupied by class members giving short presentations on progress on their projects.
Date | Class Topics | Assignment Due |
---|---|---|
WEEK 1 Friday 27th February |
Class Logistics; Assessment and Expectations; Writing Up Your Project Proposal; | |
WEEK 2 Friday 6th March |
Ethics generally and in IT (assignment due week 8) |
Project Description |
WEEK 3 Friday 13th March |
Brief Presentation of Project Descriptions |
Initial Presentation |
WEEK 4 Friday 20th March |
NO CLASS THIS WEEK! |
Project Proposal |
WEEK 5 Friday 27th March |
Presentation of Project proposals |
Project Proposal Presentation |
WEEK 6 Friday 3rd April |
EASTER FRIDAY - NO CLASS THIS WEEK! | Report Outline |
April 3rd - April 19th - MID-SEMESTER BREAK |
||
WEEK 7 Friday 24th April |
NO CLASS THIS WEEK! |
|
WEEK 8 Friday 1st May |
Help session - for those who want to come and ask questions! | Ethics Assignment |
WEEK 9 Friday 8th May |
Writing Your Final Report; Report Outline Presentations I |
|
WEEK 10 Friday 15th May |
Writing Your Final Report; Report Outline Presentations II |
|
WEEK 11 Friday 22nd May |
NO CLASS THIS WEEK! |
Abstract for Final report |
WEEK 12 Friday 29th May |
End of Semester Presentations | Final Presentation |
WEEK 13 Friday 5th June |
NO CLASS THIS WEEK! |
Final Project Report due |
Macquarie University policies and procedures are accessible from Policy Central. Students should be aware of the following policies in particular with regard to Learning and Teaching:
Academic Honesty Policy http://mq.edu.au/policy/docs/academic_honesty/policy.html
Assessment Policy http://mq.edu.au/policy/docs/assessment/policy.html
Grading Policy http://mq.edu.au/policy/docs/grading/policy.html
Grade Appeal Policy http://mq.edu.au/policy/docs/gradeappeal/policy.html
Grievance Management Policy http://mq.edu.au/policy/docs/grievance_management/policy.html
Disruption to Studies Policy http://www.mq.edu.au/policy/docs/disruption_studies/policy.html The Disruption to Studies Policy is effective from March 3 2014 and replaces the Special Consideration Policy.
In addition, a number of other policies can be found in the Learning and Teaching Category of Policy Central.
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/support/student_conduct/
Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au.
No extensions for assignments will be granted. Late assignments will be accepted up to 72 hours after the submission deadline. There will be a deduction of 10% of the total available marks made from the total awarded mark for each 24 hour period or part thereof that the submission is late (for example, 25 hours late in submission – 20% penalty). This penalty does not apply for cases in which an application for special consideration is made and approved.
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to improve your marks and take control of your study.
Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.
For all student enquiries, visit Student Connect at ask.mq.edu.au
For help with University computer systems and technology, visit http://informatics.mq.edu.au/help/.
When using the University's IT, you must adhere to the Acceptable Use Policy. The policy applies to all who connect to the MQ network including students.
Our postgraduates will demonstrate a high standard of discernment and common sense in their professional and personal judgment. They will have the ability to make informed choices and decisions that reflect both the nature of their professional work and their personal perspectives.
This graduate capability is supported by:
Our postgraduates will be able to demonstrate a significantly enhanced depth and breadth of knowledge, scholarly understanding, and specific subject content knowledge in their chosen fields.
This graduate capability is supported by:
Our postgraduates will be capable of utilising and reflecting on prior knowledge and experience, of applying higher level critical thinking skills, and of integrating and synthesising learning and knowledge from a range of sources and environments. A characteristic of this form of thinking is the generation of new, professionally oriented knowledge through personal or group-based critique of practice and theory.
This graduate capability is supported by:
Our postgraduates will be capable of systematic enquiry; able to use research skills to create new knowledge that can be applied to real world issues, or contribute to a field of study or practice to enhance society. They will be capable of creative questioning, problem finding and problem solving.
This graduate capability is supported by:
Our postgraduates will be able to communicate effectively and convey their views to different social, cultural, and professional audiences. They will be able to use a variety of technologically supported media to communicate with empathy using a range of written, spoken or visual formats.
This graduate capability is supported by:
Our postgraduates will be ethically aware and capable of confident transformative action in relation to their professional responsibilities and the wider community. They will have a sense of connectedness with others and country and have a sense of mutual obligation. They will be able to appreciate the impact of their professional roles for social justice and inclusion related to national and global issues
This graduate capability is supported by:
The final presentation is now 10% of the semester (down from 15%)
The final report is now 40% of the semester (up from 35%).
The ethics assignment is still due in week 8, but the workshop/academic material will be presented in week 2, as I plan to be away in week 7. I can not foresee any particular problem with covering ethics material, that much earlier than the relevant assignment is due.
Students have been asked BEFORE semester to start thinking of their project topic and have been given a list of suitable academics to approach to supervise them in their specialisations.
Projects are no longer analysis vs. development, rather projects are in a given specialisation (management, IS, networking, security, web engineering). Only the management projects should be analysis per se. The other projects should involve varying degrees of development.
We will use standards based assessment to reflect the level of performance students achieve in this unit. Five standard levels for the assessment tasks during the semester (excluding the final exam) are: unsatisfactory, developing, functional, proficient and advanced. These standard levels summarize different levels of achievement in relation to learning outcomes and are defined below.
Learning Oucome #1 |
Unsatisfactory |
Developing |
Functional |
Proficient |
Advanced |
Use research methods in the planning, analysis, design, implementation, delivery and maintenance of software systems, considering the importance of professional ethics, and of how to recognize and address ethical issues when they arise. | Unsatisfactory or poor understanding of IT principles as assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, and Final Report. Significantly more work is needed to achieve final grade of Pass. | Developing understanding of IT principles as assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, and Final Report. Improvement is needed to achieve final grade of Pass. | Satisfactory understanding of IT principlesas assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, and Final Report. | Good to very good understanding of principles as assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, and Final Report. | Superior understanding of principles as assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, and Final Report. |
Learning Oucome #2 |
Unsatisfactory |
Developing |
Functional |
Proficient |
Advanced |
Plan and execute a project from a brief initial specification through to a complete set of agreed outcomes and demonstrate an advanced understanding for systems analysis and/or development projects in the area of IT. | Unsatisfactory implementation of IT project or the analysis work as assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, Report Outline, and Final Report. Significantly more work is needed to achieve final grade of Pass. | Developing ability to implement IT applications or systems analysis as assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, Report Outline, and Final Report. Improvement is needed to achieve final grade of Pass. | Satisfactory implementation of IT project or systems analysis as assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, Report Outline, and Final Report. | Good to very good quality IT project as assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, Report Outline, and Final Report. | Superior quality IT project with the addition of originality and/or creativity as assessed in Progress Report, Project Description, Project Proposal, Ethics Assignment, Report Outline, and Final Report. |
Learning Oucome #3 |
Unsatisfactory |
Developing |
Functional |
Proficient |
Advanced |
Write a survey as a collection of literature or background information, drawing out the key themes and issues and draw comparisons between previous research studies and the research methods used for investigation and implementation of software systems. | Unsatisfactory survey in the IT project as assessed in Project Proposal and Final Report. Significantly more work is needed to achieve final grade of Pass. | Developing ability in surveys for IT applications as assessed in Project Proposal and Final Report. Improvement is needed to achieve final grade of Pass. | Satisfactory surveys for IT applications as assessed in Project Proposal and Final Report. | Good to very good quality IT surveys as assessed in Project Proposal and Final Report. | Superior quality IT survey with the addition of originality and/or creativity as assessed in Project Proposal and Final Report. |
Learning Oucome #4 |
Unsatisfactory |
Developing |
Functional |
Proficient |
Advanced |
Develop academic skills such as academic writing and oral presentation, note-taking and revision, locating information, and managing deadlines and heavy reading loads; as well as an ability to give clear, concise and coherent verbal presentations. | Unsatisfactory reporting and presentation skills as assessed in Progress Report, Project Description, Initial presentation, Project Proposal, Report Outline, Final presentation, and Final Report. Significantly more work is needed to achieve final grade of Pass. | Developing ability in reporting and presentation of IT projects as assessed in Progress Report, Project Description, Initial presentation, Project Proposal, Report Outline, Final presentation, and Final Report. Improvement is needed to achieve final grade of Pass. | Satisfactory reporting and presentation skills as assessed in Progress Report, Project Description, Initial presentation, Project Proposal, Report Outline, Final presentation, and Final Report. | Good to very good quality reporting and presentation skills as assessed in Progress Report, Project Description, Initial presentation, Project Proposal, Report Outline, Final presentation, and Final Report. | Superior quality reporting and presentation skills with the addition of originality and/or creativity as assessed in Progress Report, Project Description, Initial presentation, Project Proposal, Report Outline, Final presentation, and Final Report. |
Learning Oucome #5 |
Unsatisfactory |
Developing |
Functional |
Proficient |
Advanced |
Develop better understanding of their own strengths and weaknesses, and ability to utilise these. | Unsatisfactory reporting skills in the IT project as assessed in Progress Reports. Significantly more work is needed to achieve final grade of Pass. | Developing reporting skills in the IT project as assessed in Progress Reports. Improvement is needed to achieve final grade of Pass. | Satisfactory reporting skills in the IT project as assessed in Progress Reports. | Good to very good quality reporting skills in the IT project as assessed in Progress Reports. | Superior quality reporting skills in the IT project with the addition of originality and/or creativity as assessed in Progress Reports. |
Learning Oucome #6 |
Unsatisfactory |
Developing |
Functional |
Proficient |
Advanced |
Clearly present the results of work carried out in a detailed and appropriately structured report and communicate effectively in both spoken and written academic forms. | Unsatisfactory reporting skills in the IT project as assessed in all assessment items. Significantly more work is needed to achieve final grade of Pass | Developing reporting skills in the IT project as assessed in all assessment items. Improvement is needed to achieve final grade of Pass. | Satisfactory reporting skills in the IT project as assessed in all assessment items. | Good to very good quality reporting skills in the IT project as assessed in all assessment items. | Superior quality reporting skills in the IT project with the addition of originality and/or creativity as assessed in all assessment items. |
Each assessment task submitted will be given a numerical mark, and an indication of the standard level reached (according to the above table).
At the end of the semester, you will receive a final grade that reflects your overall achievement in the unit. The different possible final grades are defined in general terms below.
Your final grade depends on your performance in each part of the assessment. For each task, you receive a mark that reflects your standard of performance regarding each learning outcome assessed by this task. Then the different component marks are added up (with appropriate weightings applied) to determine your total mark out of 100. Your grade then depends on this total mark and your overall standards of performance. Concretely, in order to pass the unit, you must demonstrate satisfactory understanding of development or analysis methods in IT applications, have a basic understanding of the lecture material, successfully implement or conduct IT project and demonstrate satisfactory level of achievement in the final report. In order to obtain a grade higher than a Pass, you have to fulfill additional conditions. See below the grade standards made specific for this unit:
High Distinction: Outstanding quality IT projects with the addition of originality and/or creativity achieved by an outstanding understanding of concepts. Students are expected to go beyond the limits of lecture material.
Distinction: Superior quality IT projects achieved by superior understanding of concepts. Students are expected to master the lecture material. They are expected to successfully achieve all the goals defined in the IT project.
Credit: Good understanding of concepts and good quality IT projects. Students are expected to have good understanding of the lecture material. They are expected to successfully achieve most of the goals listed in IT project.