Students

ENGG300 – Engineering Project Practices

2018 – S2 Day

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff Associate Lecturer
Nicholas Tse
Contact via +612 9850 9075
WR50
Tue & Wed (or by appointment)
Scholarly Teaching Fellow
Rex Di Bona
Contact via +612 9850 4242
WR50
Tue & Wed
Credit points Credit points
3
Prerequisites Prerequisites
((39cp at 100 level or above) including ENGG200) and (admission to BE or BE(Hons) or BEBA or BE(Hons)BA or BEBBA or BEBCom or BE(Hons)BCom or BEBSc or BE(Hons)BSc)
Corequisites Corequisites
Co-badged status Co-badged status
ENGG600
Unit description Unit description
In this unit, students will learn professional engineering skills, at an advanced level, through conducting an engineering project. Emphasis will be placed on project management and engineering documentation.

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • L01. Students will be able to apply specific problem-solving approaches including problem decomposition, system-level modelling, model refinement, manufacturing costing, and background research.
  • L02. Students will develop and apply the appropriate activities to budget the financial risk and gain for any engineering endeavours.
  • L03. Students will demonstrate understanding and implementation of standards.
  • L04. Students will demonstrate understanding and implementation of Engineering projects.
  • L05. Students will demonstrate a working knowledge of engineering documents and their preparation.
  • L06. Students will assess and incorporate feedback and new technologies as part of continuous improvement and learning.

General Assessment Information

Conditions required to pass the unit: 

Grading and passing requirement for unit

In order to pass this unit a student must obtain a mark of 50% or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).

For further details about grading, please refer to the policies and procedures section below.

 

Hurdle Requirements

The A0. Workshop Participation is a hurdle requirement. An attendance of 80% or more is a condition of passing this unit. Students are required to attend at least 10 out of 13 workshop sessions to pass this unit.

 

Late submissions and Resubmissions

Late submissions will attract a penalty of 50% deduction per day. Extenuating circumstances will be considered upon lodgment of an application for special consideration.

Resubmissions of work are not allowed.

Assessment Tasks

Name Weighting Hurdle Due
A0. Workshop Participation 0% Yes Week 13
A1. Weekly Submission Tasks 10% No Ongoing
A2. Requirements Document 12% No Week 5
A3. Testing Document 18% No Week 9
A4. Reflection journal entries 10% No Week 13
A5. Final Project Proposal 50% No Week 13

A0. Workshop Participation

Due: Week 13
Weighting: 0%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)

This is a pass/fail hurdle assessment: active participation to workshop and team project is a mandatory requirement of passing this unit. In class participation of 80% is required (least 10/13 classes are required)


On successful completion you will be able to:
  • L06. Students will assess and incorporate feedback and new technologies as part of continuous improvement and learning.

A1. Weekly Submission Tasks

Due: Ongoing
Weighting: 10%

Weekly Submission Tasks required by students on an ongoing base. This will show participation in workshop activities, commitment to the semester-long project and accountability to the team.

The tasks will range from pre-class activities and preparations to agreed deliverables. 

More detail of week to week tasks will be available on iLearn. 


On successful completion you will be able to:
  • L01. Students will be able to apply specific problem-solving approaches including problem decomposition, system-level modelling, model refinement, manufacturing costing, and background research.
  • L04. Students will demonstrate understanding and implementation of Engineering projects.

A2. Requirements Document

Due: Week 5
Weighting: 12%

This is a submittable task by the team listing the specification requirements for the semester-long project.

Further information will be provided on iLearn. 


On successful completion you will be able to:
  • L01. Students will be able to apply specific problem-solving approaches including problem decomposition, system-level modelling, model refinement, manufacturing costing, and background research.
  • L02. Students will develop and apply the appropriate activities to budget the financial risk and gain for any engineering endeavours.
  • L03. Students will demonstrate understanding and implementation of standards.
  • L05. Students will demonstrate a working knowledge of engineering documents and their preparation.

A3. Testing Document

Due: Week 9
Weighting: 18%

This is a submittable task by the team listing the testing requirements for the project.

Further information will be provided on iLearn.


On successful completion you will be able to:
  • L01. Students will be able to apply specific problem-solving approaches including problem decomposition, system-level modelling, model refinement, manufacturing costing, and background research.
  • L02. Students will develop and apply the appropriate activities to budget the financial risk and gain for any engineering endeavours.
  • L03. Students will demonstrate understanding and implementation of standards.
  • L05. Students will demonstrate a working knowledge of engineering documents and their preparation.

A4. Reflection journal entries

Due: Week 13
Weighting: 10%

An A4 bound log book of journal entries. There should be a summary reflective evaluation of your learning in relation to the Unit's learning outcomes.

Further information will be provided on iLearn


On successful completion you will be able to:
  • L05. Students will demonstrate a working knowledge of engineering documents and their preparation.
  • L06. Students will assess and incorporate feedback and new technologies as part of continuous improvement and learning.

A5. Final Project Proposal

Due: Week 13
Weighting: 50%

Combine all your reports, plus those from your team, to create a proposal and project plan which convinces the unit conveners that you should be awarded the contract to work on the originally proposed problem. The task will also evaluate the group solution/product to the project.

Further marking rubric for this activity item will be provided on iLearn. 


On successful completion you will be able to:
  • L01. Students will be able to apply specific problem-solving approaches including problem decomposition, system-level modelling, model refinement, manufacturing costing, and background research.
  • L02. Students will develop and apply the appropriate activities to budget the financial risk and gain for any engineering endeavours.
  • L03. Students will demonstrate understanding and implementation of standards.
  • L04. Students will demonstrate understanding and implementation of Engineering projects.
  • L05. Students will demonstrate a working knowledge of engineering documents and their preparation.

Delivery and Resources

ENGG300 is a continuation of the ENGG Spine Units. It aims to continue the scaffolded development that began in ENGG100 on the transferable professional skills. In this unit, students are expected to make use of all the resourced presented in the ENGG spine units which include materials presented in ENGG100 and ENGG200 to assist them with achieving the learning outcomes of this Unit.

Recommended and/or Required Texts

Students are required

  • to familiarise themselves with the project planning tool Jira Atlassian (https://www.atlassian.com/agile/tutorials)
  • to have a hardcover bound A4 notebook as a log book

Recommended texts:

  • Title: A User's Guide to Engineering, Author: James N Jensen, Publisher: Pearson, Year: 2006
  • iLearn learning modules
  • Previous ENGG Spine Unit materials (ENGG100 and ENGG200) and any relevant materials from other pre-requisite Units. 

Students will require a scientific or engineering calculator.

Unit Schedule

Refer to iLearn and lecture notes for the unit schedule.

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Undergraduate students seeking more policy resources can visit the Student Policy Gateway (https://students.mq.edu.au/support/study/student-policy-gateway). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

If you would like to see all the policies relevant to Learning and Teaching visit Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central).

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/study/getting-started/student-conduct​

Results

Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au.

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

Learning Skills

Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to improve your marks and take control of your study.

Student Services and Support

Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.

Student Enquiries

For all student enquiries, visit Student Connect at ask.mq.edu.au

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.

Graduate Capabilities

Creative and Innovative

Our graduates will also be capable of creative thinking and of creating knowledge. They will be imaginative and open to experience and capable of innovation at work and in the community. We want them to be engaged in applying their critical, creative thinking.

This graduate capability is supported by:

Learning outcomes

  • L01. Students will be able to apply specific problem-solving approaches including problem decomposition, system-level modelling, model refinement, manufacturing costing, and background research.
  • L04. Students will demonstrate understanding and implementation of Engineering projects.
  • L06. Students will assess and incorporate feedback and new technologies as part of continuous improvement and learning.

Assessment tasks

  • A0. Workshop Participation
  • A1. Weekly Submission Tasks
  • A2. Requirements Document
  • A3. Testing Document
  • A5. Final Project Proposal

Capable of Professional and Personal Judgement and Initiative

We want our graduates to have emotional intelligence and sound interpersonal skills and to demonstrate discernment and common sense in their professional and personal judgement. They will exercise initiative as needed. They will be capable of risk assessment, and be able to handle ambiguity and complexity, enabling them to be adaptable in diverse and changing environments.

This graduate capability is supported by:

Learning outcomes

  • L02. Students will develop and apply the appropriate activities to budget the financial risk and gain for any engineering endeavours.
  • L03. Students will demonstrate understanding and implementation of standards.
  • L04. Students will demonstrate understanding and implementation of Engineering projects.
  • L06. Students will assess and incorporate feedback and new technologies as part of continuous improvement and learning.

Assessment tasks

  • A0. Workshop Participation
  • A1. Weekly Submission Tasks
  • A2. Requirements Document
  • A3. Testing Document
  • A4. Reflection journal entries
  • A5. Final Project Proposal

Commitment to Continuous Learning

Our graduates will have enquiring minds and a literate curiosity which will lead them to pursue knowledge for its own sake. They will continue to pursue learning in their careers and as they participate in the world. They will be capable of reflecting on their experiences and relationships with others and the environment, learning from them, and growing - personally, professionally and socially.

This graduate capability is supported by:

Learning outcomes

  • L04. Students will demonstrate understanding and implementation of Engineering projects.
  • L06. Students will assess and incorporate feedback and new technologies as part of continuous improvement and learning.

Assessment tasks

  • A0. Workshop Participation
  • A1. Weekly Submission Tasks
  • A2. Requirements Document
  • A3. Testing Document
  • A4. Reflection journal entries
  • A5. Final Project Proposal

Discipline Specific Knowledge and Skills

Our graduates will take with them the intellectual development, depth and breadth of knowledge, scholarly understanding, and specific subject content in their chosen fields to make them competent and confident in their subject or profession. They will be able to demonstrate, where relevant, professional technical competence and meet professional standards. They will be able to articulate the structure of knowledge of their discipline, be able to adapt discipline-specific knowledge to novel situations, and be able to contribute from their discipline to inter-disciplinary solutions to problems.

This graduate capability is supported by:

Learning outcomes

  • L01. Students will be able to apply specific problem-solving approaches including problem decomposition, system-level modelling, model refinement, manufacturing costing, and background research.
  • L02. Students will develop and apply the appropriate activities to budget the financial risk and gain for any engineering endeavours.
  • L04. Students will demonstrate understanding and implementation of Engineering projects.

Assessment tasks

  • A0. Workshop Participation
  • A2. Requirements Document
  • A3. Testing Document
  • A5. Final Project Proposal

Critical, Analytical and Integrative Thinking

We want our graduates to be capable of reasoning, questioning and analysing, and to integrate and synthesise learning and knowledge from a range of sources and environments; to be able to critique constraints, assumptions and limitations; to be able to think independently and systemically in relation to scholarly activity, in the workplace, and in the world. We want them to have a level of scientific and information technology literacy.

This graduate capability is supported by:

Learning outcomes

  • L01. Students will be able to apply specific problem-solving approaches including problem decomposition, system-level modelling, model refinement, manufacturing costing, and background research.
  • L02. Students will develop and apply the appropriate activities to budget the financial risk and gain for any engineering endeavours.
  • L04. Students will demonstrate understanding and implementation of Engineering projects.
  • L06. Students will assess and incorporate feedback and new technologies as part of continuous improvement and learning.

Assessment tasks

  • A0. Workshop Participation
  • A2. Requirements Document
  • A3. Testing Document
  • A4. Reflection journal entries
  • A5. Final Project Proposal

Problem Solving and Research Capability

Our graduates should be capable of researching; of analysing, and interpreting and assessing data and information in various forms; of drawing connections across fields of knowledge; and they should be able to relate their knowledge to complex situations at work or in the world, in order to diagnose and solve problems. We want them to have the confidence to take the initiative in doing so, within an awareness of their own limitations.

This graduate capability is supported by:

Learning outcomes

  • L01. Students will be able to apply specific problem-solving approaches including problem decomposition, system-level modelling, model refinement, manufacturing costing, and background research.
  • L02. Students will develop and apply the appropriate activities to budget the financial risk and gain for any engineering endeavours.
  • L04. Students will demonstrate understanding and implementation of Engineering projects.
  • L06. Students will assess and incorporate feedback and new technologies as part of continuous improvement and learning.

Assessment tasks

  • A0. Workshop Participation
  • A1. Weekly Submission Tasks
  • A2. Requirements Document
  • A3. Testing Document
  • A4. Reflection journal entries
  • A5. Final Project Proposal

Effective Communication

We want to develop in our students the ability to communicate and convey their views in forms effective with different audiences. We want our graduates to take with them the capability to read, listen, question, gather and evaluate information resources in a variety of formats, assess, write clearly, speak effectively, and to use visual communication and communication technologies as appropriate.

This graduate capability is supported by:

Learning outcomes

  • L03. Students will demonstrate understanding and implementation of standards.
  • L05. Students will demonstrate a working knowledge of engineering documents and their preparation.
  • L06. Students will assess and incorporate feedback and new technologies as part of continuous improvement and learning.

Assessment tasks

  • A0. Workshop Participation
  • A1. Weekly Submission Tasks
  • A2. Requirements Document
  • A3. Testing Document
  • A4. Reflection journal entries
  • A5. Final Project Proposal

Engaged and Ethical Local and Global citizens

As local citizens our graduates will be aware of indigenous perspectives and of the nation's historical context. They will be engaged with the challenges of contemporary society and with knowledge and ideas. We want our graduates to have respect for diversity, to be open-minded, sensitive to others and inclusive, and to be open to other cultures and perspectives: they should have a level of cultural literacy. Our graduates should be aware of disadvantage and social justice, and be willing to participate to help create a wiser and better society.

This graduate capability is supported by:

Learning outcomes

  • L03. Students will demonstrate understanding and implementation of standards.
  • L05. Students will demonstrate a working knowledge of engineering documents and their preparation.

Assessment tasks

  • A1. Weekly Submission Tasks
  • A5. Final Project Proposal

Socially and Environmentally Active and Responsible

We want our graduates to be aware of and have respect for self and others; to be able to work with others as a leader and a team player; to have a sense of connectedness with others and country; and to have a sense of mutual obligation. Our graduates should be informed and active participants in moving society towards sustainability.

This graduate capability is supported by:

Learning outcomes

  • L02. Students will develop and apply the appropriate activities to budget the financial risk and gain for any engineering endeavours.
  • L03. Students will demonstrate understanding and implementation of standards.

Assessment task

  • A5. Final Project Proposal

Changes from Previous Offering

Previously ENGG300/600 concentrated on performing the requirements, design, and development of a theoretical engineering problem. In this offering ENGG300/600 students will provide real world leadership to a team of students developing a system to solve a concrete engineering need. The ENGG300/600 students are expected to work together and lead ENGG200 students through the process to imagine, design, develop, iterate, test and demonstrate a solution to the challenge that is presented for the year.