Unit convenor and teaching staff |
Unit convenor and teaching staff
Unit Convenor
Rajan Shankaran
Contact via rajan.shankaran@mq.edu.au
9 WALLY'S WALK, ROOM 337
By Appointment
Lecturer
Rex Di Bona
Contact via rex.dibona@mq.edu.au
7 Wally's Walk, Room 155
By Appointment
|
---|---|
Credit points |
Credit points
4
|
Prerequisites |
Prerequisites
ITEC647 or admission to MCyberSec with a specialisation in Internetworking
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
This unit will aim to provide a sound understanding of the architecture and operating principles of mobile and wireless networks. The unit will cover two fronts: introduce students to the diverse literature on mobile data networks, and expose them to the fundamental issues in design and analysis of different mobile network architectures. A healthy mix of technological and research issues will be covered pertaining to a wide range of topics in mobile networking including wireless LANs, mobile network layer design, location management and mobility tracking, mobile transport layer design issues, and ad hoc networks.
|
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
The three Quizzes constitute 30% of the total mark and serve as a feedback mechanism to monitor your progress in the unit.
Assignments constitute 30% of the total mark.All assignments are individual assignments. Assignment must be submitted on time. Late submission of the assignment will be accepted, but penalized at the rate of 5% per working day late.
Assignment work must be written clearly, with good grammar, correct word usage, correct punctuation, and lack of spelling errors. Poor or bad expression will be penalized. Wherever required, all written work must be properly referenced and conform to standard stylistic conventions.
General notes on assignment
For all submittable assignment work you are encouraged to:
Examination
The examination is a hurdle in this unit. Concretely, in order to pass the unit, you must get at least 40% of the marks in the final examination. Students who score between 30% and 40% will be eligible for a second chance examination.
If you receive special consideration for the final exam, a supplementary exam will be scheduled in the week of December 17-21 2018. By making a special consideration application for the final exam you are declaring yourself available for a resit during the supplementary examination period and will not be eligible for a second special consideration approval based on pre-existing commitments. Please ensure you are familiar with the policy prior to submitting an application. Approved applicants will receive an individual notification one week prior to the exam with the exact date and time of their supplementary examination.
If you are given a second opportunity to sit the final examination as a result of failing to meet the minimum mark required, you will be offered that chance during the same supplementary examination period and will be notified of the exact day and time after the publication of final results for the unit.
Name | Weighting | Hurdle | Due |
---|---|---|---|
Quiz 1 | 10% | No | Week 5 (in class) |
Quiz 2 | 10% | No | week 9 (In class) |
Quiz 3 | 10% | No | Week 12 (In class) |
Assignment 1 | 15% | No | Week 8 (Thursday 6 pm) |
Assignment 2 | 15% | No | Week 13 (Thursday 6 pm) |
Final Exam | 40% | Yes | Sem 2 Exam Period |
Due: Week 5 (in class)
Weighting: 10%
Quiz 1 is a short test (close book) that will be based on your previously covered lecture material for weeks 1-4. The quiz questions will be handed over to you at the beginning of your Lecture class. Quiz 1 contributes 5% of the total mark.
Due: week 9 (In class)
Weighting: 10%
Quiz 2 is a short test (close book) that will be based on your previously covered lecture material for Weeks 4-7. The quiz questions will be handed over to you at the beginning of your Lecture class. Quiz 2 contributes 5% of the total mark.
Due: Week 12 (In class)
Weighting: 10%
Quiz 3 is a short test (close book) that will be based on your previously covered lecture material for Weeks 8-11. Quiz 3 contributes 5% of the total mark
Due: Week 8 (Thursday 6 pm)
Weighting: 15%
Individual Assignment
Assignment Type: Problem Solving:
The purpose of the problem solving assignment is to help the students to get accustomed to dealing with real world problem situations/issues.It is designed to help students analyse a particular problem and find its best solution. Some questions may require an in depth research and will be a process to come up with an acceptable and reasonable answer
Due: Week 13 (Thursday 6 pm)
Weighting: 15%
Individual Assignment
Assignment Type: Problem Solving-Research: This type of assignment is designed to help students build up their critical thinking skills while looking for solutions to real world mobile networking related problems.
Due: Sem 2 Exam Period
Weighting: 40%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
An examination allows us to individually and securely assess student's mastery of the coursework material. The examination material will be covered by learning outcomes #1 to #7. The examination will be closed book and three (3) hours in length.
The examination is a hurdle in this unit. Concretely, in order to pass the unit, you must get at least 40% of the marks in the final examination. Students who score between 30% and 40% will be eligible for a second chance examination.
Note:
The examination is a hurdle in this unit. Concretely, in order to pass the unit, you must get at least 40% of the marks in the final examination. Students who score between 30% and 40% will be eligible for a second chance examination.
If you receive special consideration for the final exam, a supplementary exam will be scheduled in the week of December 17-21 2018. By making a special consideration application for the final exam you are declaring yourself available for a resit during the supplementary examination period and will not be eligible for a second special consideration approval based on pre-existing commitments. Please ensure you are familiar with the policy prior to submitting an application. Approved applicants will receive an individual notification one week prior to the exam with the exact date and time of their supplementary examination.
If you are given a second opportunity to sit the final examination as a result of failing to meet the minimum mark required, you will be offered that chance during the same supplementary examination period and will be notified of the exact day and time after the publication of final results for the unit.
Classes are held from 6-10 pm Thursday evenings. Lectures/Tutorials and other discussion are in 17 Wallys Wlk - Collaborative Forum
in the lecture slot.
Lectures are used to introduce mobile network technologies, protocols and design and put them in a wider context. You are encouraged to ask questions of the lecturer, both during and outside the lecture, to clarify anything you might not be sure of.
It should be noted that no single text book completely covers the content of this unit. A large portion of the lecture material is drawn from research papers, white papers and standard documents . Students are encouraged to read the weekly recommended reading list to gain a solid understanding of the topics that are covered.
There will be three quizzes in the following weeks: 5, 9, and 12. A quiz is a short test that will be based on your previously covered lecture material. For example, week 5 quiz will be based on lectures done in weeks 1-4. The quiz questions will be handed over to you at the beginning of your Lecture class. These quizzes contribute 10% of the total mark and serve as a feedback mechanism to monitor your progress in the unit.
The tutorial gives you the opportunity to interact with your peers and with the lecturer. The tutorial sessions involve informal discussions with your peers and the lecturer. Each week you will be given problems to solve prior to the tutorial; preparing solutions is important because it will allow you to discuss the problems effectively with your lecturer and maximise the feedback you get on your work.
Your assignment is to be submitted online using Turnitin. Late submission of the assignment will be accepted, but penalised at the rate of 5% per working day late. If you cannot submit assignments on time because of illness or other circumstances, please contact the convenor at the earliest possible time.
Practical sessions will be held during the lecture slot. Practical sessions are not scheduled every week. Most practical sessions are scheduled in the second half of the unit. The second half of the course.
General Notes
In this unit, you should do the following:
Lecture notes will be made available each week but these notes are intended as an outline of the lecture only and are not a substitute for your own notes or the recommended reading list.
There is no single text book containing material that could address all topics of unit. All necessary reading material will be provided by the lecturers.
Note: We anticipate that there may be some shifting of material depending on class progress during the lecture series.
Week | Topic |
1 | Introduction |
2 | Wireless Transmission (Physical Layer) |
3 | Medium Access Protocols- An Introduction |
4 | Wireless LAN (802.11) |
5-6 | Mobile IP-Cellular IP |
6-7 | Cellular Networks: An Introduction |
8-9 | Cellular-IP Integration: All IP architecture (LTE) |
9-10 | Mobile Ad Hoc Networks |
11-12 | Advanced Topics |
13 | Revision and Exam Discussion |
Macquarie University policies and procedures are accessible from Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Undergraduate students seeking more policy resources can visit the Student Policy Gateway (https://students.mq.edu.au/support/study/student-policy-gateway). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
If you would like to see all the policies relevant to Learning and Teaching visit Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central).
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/study/getting-started/student-conduct
Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au.
Special Consideration is intended for a student who is prevented by serious and unavoidable disruption from completing any unit requirements in accordance with their ability. This application form needs to be filled and submitted to the Science Centre along with some evidence to support your case. Depending on the circumstances presented, the convenor may choose to give you an alternate assessment, additional time for an assessment, make-up exam, etc. If a Supplementary Examination is granted as a result of the Special Consideration process the examination will be scheduled after the conclusion of the official examination period. For details of the Special Consideration policy specific to the Department of Computing, see the Department's policy page.
There will be a deduction of 10% of the total available marks made from the total awarded mark for each 24 hour period or part thereof that the submission is late. This penalty does not apply for cases in which an application for special consideration is made and approved.
In case of problems arising with your final grade, the first step is to organise a review. The Department recommends that you request an appointment with the convenor of the unit in order to review your grade. If the review does not solve the problem, a formal Grade Appeal can be lodged. For more information please refer to the grade appeal policy page at:
http://www.mq.edu.au/policy/docs/gradeappeal/policy.html
Plagiarism involves using the work of another person and presenting it as one's own. The Department, in line with University policy, treats all cases seriously. In particular, the Department, keeps a record of all plagiarism cases. This record is referred to so that an appropriate penalty can be applied to each case.
For concrete examples, refer to Academic Honesty Policy at: http://www.mq.edu.au/policy/docs/academic_honesty/policy.html
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to improve your marks and take control of your study.
The Department has established a Staff-Student Liaison Committee (800 level) to provide all students studying a Computing unit the opportunity to discuss related issues or problems with both students and staff. If you would like to raise any issues or make comments, please attend a liaison committee meeting, or discuss the matter with one of the student representatives who will be attending the meeting.
The committee meets two times during the semester. For each meeting, an agenda is issued and minutes are taken. These are posted on the web at http://comp.mq.edu.au/undergrad/info/liaison/800-level/
If you have concerns about the anything related to the organisation or operation of ITEC851, please convey those concerns to the unit convenor, either directly or through the liaison committee. If you have exhausted all other avenues, then you should consult the Director of MIT (A/Prof Manolya Kavakli), Director of teaching (A/Prof Steve Cassidy) or the Head of Department (Dr. Christophe Doche). You are entitled to have your concerns raised, discussed and resolved.
Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.
For all student enquiries, visit Student Connect at ask.mq.edu.au
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
Our postgraduates will demonstrate a high standard of discernment and common sense in their professional and personal judgment. They will have the ability to make informed choices and decisions that reflect both the nature of their professional work and their personal perspectives.
This graduate capability is supported by:
Our postgraduates will be able to demonstrate a significantly enhanced depth and breadth of knowledge, scholarly understanding, and specific subject content knowledge in their chosen fields.
This graduate capability is supported by:
Our postgraduates will be capable of utilising and reflecting on prior knowledge and experience, of applying higher level critical thinking skills, and of integrating and synthesising learning and knowledge from a range of sources and environments. A characteristic of this form of thinking is the generation of new, professionally oriented knowledge through personal or group-based critique of practice and theory.
This graduate capability is supported by:
Our postgraduates will be capable of systematic enquiry; able to use research skills to create new knowledge that can be applied to real world issues, or contribute to a field of study or practice to enhance society. They will be capable of creative questioning, problem finding and problem solving.
This graduate capability is supported by:
Our postgraduates will be able to communicate effectively and convey their views to different social, cultural, and professional audiences. They will be able to use a variety of technologically supported media to communicate with empathy using a range of written, spoken or visual formats.
This graduate capability is supported by:
Our postgraduates will be ethically aware and capable of confident transformative action in relation to their professional responsibilities and the wider community. They will have a sense of connectedness with others and country and have a sense of mutual obligation. They will be able to appreciate the impact of their professional roles for social justice and inclusion related to national and global issues
This graduate capability is supported by:
Some new lecture topics introduced. Some topics were removed. New practical exercises introduced
Four standards, namely HD, D, CR, P summarize as many different levels of achievement. Each standard is precisely defined to help students know what kind of performance is expected to deserve a certain mark. The standards corresponding to the sample learning outcomes of this unit are given below:
LO |
P |
Cr |
D |
HD |
LO#1 |
|
|
|
|
In-depth knowledge and understanding of mobile technologies. |
Provide basic description and definitions of mobile networking and protocol architecture |
Describe across most of the topics in mobile networking and protocol architecture. |
Discuss with breadth across most of the topics in mobile networking and protocol architecture. |
Discuss with breadth and depth across most of the topics in mobile networking and protocol architecture. |
LO#2 |
|
|
|
|
Demonstrate an understanding of design of mobile networks |
Demonstrate limited understanding of mobile technologies and protocols |
Demonstrate detailed understanding of mobile technologies and protocols |
Demonstrate an advanced understanding of mobile technologies and protocols |
Demonstrate an in-depth understanding of mobile technologies and protocols |
LO#3 |
|
|
|
|
Competence in analysis of mobile network protocols. |
Perform basic analysis of mobile technologies and protocols
|
Perform detailed analysis of mobile technologies and protocols |
Perform advanced analysis of mobile technologies and protocols
|
Perform advanced analysis of mobile technologies and protocols
|
LO#4 |
|
|
|
|
Exemplify a wide range of problems and research issues |
Describe limited set of key issues related to Mobile networking |
Explain some of the key issues related to mobile networking |
Explain most of the key issues related to mobile networking |
Discuss in depth all of the key issues related to mobile networking |
LO#5 |
|
|
|
|
Demonstrate an understanding of concepts, algorithms and protocols in mobile networking |
Demonstrate limited understanding of mobile networking concepts, algorithms and protocols |
Demonstrate detailed understanding of mobile networking concepts, algorithms and protocols |
Demonstrate an advanced understanding of mobile networking concepts, algorithms and protocols |
Demonstrate an in-depth understanding of mobile networking concepts, algorithms and protocols |
LO#6 |
|
|
|
|
Competence in analysis and evaluation of current mobile technologies. |
Analyse and evaluate limited set of current mobile technologies |
Analyse and evaluate limited set of current mobile technologies |
Analyse and evaluate limited set of current mobile technologies |
Analyse and evaluate limited set of current mobile technologies |
Grading
At the end of the semester, you will receive a grade that reflects your achievement in the unit
In this unit, the final mark will be calculated by combining the marks for all assessment tasks according to the percentage weightings shown in the assessment summary.The final examination in this unit is a hurdle requirement; you must get a mark of at least 40% in the examination to pass the unit. If you get a mark between 30% and 40% in your first attempt at the final examination, you will be given a second and final attempt.
Concretely, in order to pass the unit, you must obtain an overall total mark of 50% or higher, and a mark of 40% or higher in the final examination.
Students obtaining a higher grade than a pass in this unit will (in addition to the above)
You are encouraged to:
All work submitted should be readable and well presented.
You should never commit plagiarism in any of your submitted work, including tutorial and practical answers.
Date | Description |
---|---|
26/07/2018 | additional info on Exam added under general assessment as well as in the tasks section. |