Unit convenor and teaching staff |
Unit convenor and teaching staff
Danny Wong
Laboratory Demonstrator
Michael Udoh
Laboratory Demonstrator
Rita Roshni
Laboratory Demonstrator
Benjamin Ford
Laboratory Manager
Mark Tran
Marker
Nathan Camilleri
|
---|---|
Credit points |
Credit points
3
|
Prerequisites |
Prerequisites
(CBMS208 or CBMS200) and (CBMS204 or CBMS207 or CBMS203)
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
This unit covers advanced aspects of chemical analysis, building on the foundations laid in CBMS200. Modern chemical principles and practice of identifying substances and of determining their composition are discussed. Topics include many analytical techniques commonly employed in both industrial and academic research laboratories. Examples of applications to environmental and biological samples include: analysis of heavy metals by atomic absorption spectroscopy; inductively coupled plasma atomic emission spectroscopy; electrochemical detection of biochemicals and environmental pollutants; analysis by mass spectrometry. The unit emphasises hands-on experience in analysing real life samples, using many of these techniques. Each student also devotes a proportion of the session to gain relevant work experience in off-campus laboratories in chemical industry and research organisations, such as CSIRO.
|
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
Name | Weighting | Hurdle | Due |
---|---|---|---|
Assignment 1 | 4% | No | 01/04/2019 |
Assignment 2 | 3% | No | 06/05/2019 |
Assignment 3 | 3% | No | 27/05/2019 |
Laboratory reports | 40% | No | Week 4 - Week 13 |
Final Examinations | 50% | No | June 2019 |
Due: 01/04/2019
Weighting: 4%
Assignment 1.
Due: 06/05/2019
Weighting: 3%
Assignment 2
Due: 27/05/2019
Weighting: 3%
Assignment 3
Due: Week 4 - Week 13
Weighting: 40%
For each experiment, students are required to complete some Pre-laboratory work including Materials Safety Data Sheets and the general understanding of aim and procedure of the experiment. Following the completion of a laboratory session, students will then decide on either completing a written report or performing an oral assessment on the laboratory work. Students must complete a total of 3 written reports and 2 oral assessments.
Due: June 2019
Weighting: 50%
Closed book examination.
Lecture notes, laboratory notes, assignments can all be downloaded from iLearn.
Prescribed text:
D.A.Skoog, D.M.West, F.J.Holler, S.R.Crouch, Fundamentals of Analytical Chemistry, 9th Edition, Brooks/Cole, Thomson Learning, Inc (2014).
Recommended references (all available in University Library)
D.C.Harris, Quantitative Chemical Analysis, 9th Edition, W.H.Freeman and Company (2016).
D.S.Hage, J.D.Carr, Analytical Chemistry and Quantitative Analysis, International Edition, Prentice Hall (2011).
D.A.Skoog, F.J.Holler and S.R.Crouch, Principles of Instrumental Analysis, 6th Edition, Saunders College Publishing (2007).
Date | Time | Activity |
February 25 | 9:00 - 10:30 | Outline of Unit |
Calibration Methods | ||
11:00 - 12:30 | Electroanalytical Chemistry | |
4:00 - 6:00 | Scientific Report Writing | |
March 4 | 9:00 - 10:30 | Electroanalytical Chemistry |
11:00 - 12:30 | Electroanalytical Chemistry | |
1:30 - 5:30 | Laboratory Session | |
March 11 | 9:00 - 10:30 | Electroanalytical Chemistry |
11:00 - 12:30 | Electroanalytical Chemistry | |
1:30 - 5:30 | Laboratory Session | |
March 18 | 9:00 - 10:30 | Flow Injection Analysis |
11:00 - 12:30 | Flow Injection Analysis | |
1:30 - 5:30 | Laboratory Session | |
March 25 | 9:00 - 10:30 | Flow Injection Analysis |
11:00 - 12:30 | Spectroscopic Techniques | |
1:30 - 5:30 | Laboratory Session | |
April 1 | 9:00 - 10:30 | Spectroscopic Techniques |
11:00 - 12:30 | Spectroscopic Techniques | |
1:30 - 5:30 | Laboratory Session | |
April 8 | 9:00 - 10:30 | Spectroscopic Techniques |
11:00 - 12:30 | Spectroscopic Techniques | |
1:30 - 5:30 | Laboratory Session | |
May 27 | 9:00 - 10:30 | Spectroscopic Techniques |
11:00 - 12:30 | Spectroscopic Techniques | |
1:30 - 5:30 | Laboratory Session | |
June 3 | 9:00 - 10:30 | Sensing Technologies |
11:00 - 12:30 | Sensing Technologies | |
1:30 - 5:30 | Presentation of project work (CBMS825) | |
April 29, May 6, May 13 and May 20: Off-campus Laboratory Visits
Macquarie University policies and procedures are accessible from Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Undergraduate students seeking more policy resources can visit the Student Policy Gateway (https://students.mq.edu.au/support/study/student-policy-gateway). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
If you would like to see all the policies relevant to Learning and Teaching visit Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central).
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/study/getting-started/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to improve your marks and take control of your study.
Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.
For all student enquiries, visit Student Connect at ask.mq.edu.au
If you are a Global MBA student contact globalmba.support@mq.edu.au
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
We want our graduates to have emotional intelligence and sound interpersonal skills and to demonstrate discernment and common sense in their professional and personal judgement. They will exercise initiative as needed. They will be capable of risk assessment, and be able to handle ambiguity and complexity, enabling them to be adaptable in diverse and changing environments.
This graduate capability is supported by:
Our graduates will have enquiring minds and a literate curiosity which will lead them to pursue knowledge for its own sake. They will continue to pursue learning in their careers and as they participate in the world. They will be capable of reflecting on their experiences and relationships with others and the environment, learning from them, and growing - personally, professionally and socially.
This graduate capability is supported by:
Our graduates will take with them the intellectual development, depth and breadth of knowledge, scholarly understanding, and specific subject content in their chosen fields to make them competent and confident in their subject or profession. They will be able to demonstrate, where relevant, professional technical competence and meet professional standards. They will be able to articulate the structure of knowledge of their discipline, be able to adapt discipline-specific knowledge to novel situations, and be able to contribute from their discipline to inter-disciplinary solutions to problems.
This graduate capability is supported by:
We want our graduates to be capable of reasoning, questioning and analysing, and to integrate and synthesise learning and knowledge from a range of sources and environments; to be able to critique constraints, assumptions and limitations; to be able to think independently and systemically in relation to scholarly activity, in the workplace, and in the world. We want them to have a level of scientific and information technology literacy.
This graduate capability is supported by:
Our graduates should be capable of researching; of analysing, and interpreting and assessing data and information in various forms; of drawing connections across fields of knowledge; and they should be able to relate their knowledge to complex situations at work or in the world, in order to diagnose and solve problems. We want them to have the confidence to take the initiative in doing so, within an awareness of their own limitations.
This graduate capability is supported by:
We want to develop in our students the ability to communicate and convey their views in forms effective with different audiences. We want our graduates to take with them the capability to read, listen, question, gather and evaluate information resources in a variety of formats, assess, write clearly, speak effectively, and to use visual communication and communication technologies as appropriate.
This graduate capability is supported by:
As local citizens our graduates will be aware of indigenous perspectives and of the nation's historical context. They will be engaged with the challenges of contemporary society and with knowledge and ideas. We want our graduates to have respect for diversity, to be open-minded, sensitive to others and inclusive, and to be open to other cultures and perspectives: they should have a level of cultural literacy. Our graduates should be aware of disadvantage and social justice, and be willing to participate to help create a wiser and better society.
This graduate capability is supported by:
We want our graduates to be aware of and have respect for self and others; to be able to work with others as a leader and a team player; to have a sense of connectedness with others and country; and to have a sense of mutual obligation. Our graduates should be informed and active participants in moving society towards sustainability.
This graduate capability is supported by: