Coronavirus (COVID-19) Update
Due to the Coronavirus (COVID-19) pandemic, any references to assessment tasks and on-campus delivery may no longer be up-to-date on this page.
Students should consult iLearn for revised unit information.
Find out more about the Coronavirus (COVID-19) and potential impacts on staff and students
Unit convenor and teaching staff |
Unit convenor and teaching staff
Unit Convener
Dr Norman McCulla
Contact via Contact via iLearn
Room 272, 29 WW
By appointment
John De Nobile
|
---|---|
Credit points |
Credit points
10
|
Prerequisites |
Prerequisites
Admission to MEd or PGDipEdS or GradCertEdS or MEdLead or GradCertHEd or MEChild or GradCertEChild or MTeach(0-5) or GradCertClinEdSim or MIndigenousEd or GradDipIndigenousEd or GradDipChildLit or MChildLit or MPH or MSocEntre
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
This unit focuses on the nature of leadership and what it means to lead for learning in a variety of educational contexts including early childhood, primary, secondary, adult and higher education. Participants: - explore and critique experience and existing knowledge and understanding of leadership in educational settings; - develop specialised knowledge of the broad theory and research relevant to the study and practice of educational leadership; - build a deeper understanding and appreciation of recent developments in research, theory and practice of leadership for learning through a process of individual and collaborative scholarship and critical reflection; - apply a range of relevant theories and constructs to the analysis of their own and others' experience of leadership and management in an educational setting, and; - develop capacity to lead for learning in multifaceted and changing educational organisations. |
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
Coronavirus (COVID-19) Update
Assessment details are no longer provided here as a result of changes due to the Coronavirus (COVID-19) pandemic.
Students should consult iLearn for revised unit information.
Find out more about the Coronavirus (COVID-19) and potential impacts on staff and students
PLEASE NOTE: ASSESSMENT TASK DETAILS, INCLUDING DUE DATES, WILL BE PUBLISHED IN iLEARN.
Assessment Presentation and Submission Guidelines
Please follow these guidelines when you submit each assignment:
Draft Submissions & Turnitin Originality Reports
Please note:
Assignment extensions and late penalties
Requesting a re-assessment of an assignment
If you have evidence that your task has been incorrectly assessed against the grade descriptors you can request a re-mark. To request a re-mark you need to contact the unit convenor within 7 days of the date of return of the assignment and provide a detailed assessment of your script against the task criteria. Evidence from your assignment must be provided to support your judgements.
Note: Failed assessments cannot be re-marked as they are all double-marked as a part of the moderation process.
Please note: The outcome of a re-mark may be a higher/lower or unchanged grade. Grades are standards referenced and effort is NOT a criterion.
University policy on grading
Criteria for awarding grades for assessment tasks
Assignments will be awarded grades ranging from HD to F according to guidelines set out in the University's Grading Policy. The following descriptive criteria are included for your information.
Descriptive Criteria for awarding grades in the unit
In order to meet the unit outcomes and successfully pass this unit, students must make a genuine attempt at all assessment tasks. Where any submitted assessment task is considered to be unsatisfactory in this regard, the highest possible final grade that can be awarded for the unit will be 45.
Students will be awarded grades ranging from HD to F according to guidelines set out in the policy: https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policies/assessment-in-effect-from-session-2-2016
The following generic grade descriptors provide university-wide standards for awarding final grades.
Grade |
Descriptor |
HD (High Distinction) |
Provides consistent evidence of deep and critical understanding in relation to the learning outcomes. There is substantial originality and insight in identifying, generating and communicating competing arguments, perspectives or problem solving approaches; critical evaluation of problems, their solutions and their implications; creativity in application as appropriate to the discipline. |
D (Distinction) |
Provides evidence of integration and evaluation of critical ideas, principles and theories, distinctive insight and ability in applying relevant skills and concepts in relation to learning outcomes. There is demonstration of frequent originality in defining and analysing issues or problems and providing solutions; and the use of means of communication appropriate to the discipline and the audience. |
Cr (Credit) |
Provides evidence of learning that goes beyond replication of content knowledge or skills relevant to the learning outcomes. There is demonstration of substantial understanding of fundamental concepts in the field of study and the ability to apply these concepts in a variety of contexts; convincing argumentation with appropriate coherent justification; communication of ideas fluently and clearly in terms of the conventions of the discipline. |
P (Pass). |
Provides sufficient evidence of the achievement of learning outcomes. There is demonstration of understanding and application of fundamental concepts of the field of study; routine argumentation with acceptable justification; communication of information and ideas adequately in terms of the conventions of the discipline. The learning attainment is considered satisfactory or adequate or competent or capable in relation to the specified outcomes |
F (Fail) |
Does not provide evidence of attainment of learning outcomes. There is missing or partial or superficial or faulty understanding and application of the fundamental concepts in the field of study; missing, undeveloped, inappropriate or confusing argumentation; incomplete, confusing or lacking communication of ideas in ways that give little attention to the conventions of the discipline. |
Note: If you fail a unit with a professional experience component the fail grade will be on your transcript irrespective of the timing of the placement.
Withdrawing from this UG Unit
If you are considering withdrawing from this unit, please seek academic advice via https://ask.mq.edu.au before doing so as this unit may be a co-requisite or prerequisite for units in the following sessions and may impact on your progression through the degree.
Results
Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au.
Coronavirus (COVID-19) Update
Any references to on-campus delivery below may no longer be relevant due to COVID-19.
Please check here for updated delivery information: https://ask.mq.edu.au/account/pub/display/unit_status
This unit is offered via iLearn and requires internet access. Some face to face sessions may also be offered and you are encouraged to attend if you live locally, regardless of whether you are an internal or external student.
Access and technical assistance
Information for students about access to the online component of this unit is available at ilearn.mq.edu.au/login/MQ/. You will need to enter your student username and password.
Please do NOT contact the Unit Convenor regarding iLearn technical help.
No extensions will be given for any technical issues. Allow enough time for your submissions.
Assistance is available from IT Helpdesk ph: 1800 67 4357, or log a request at help.mq.edu.au. OneHelp is the online IT support service for both students and staff.
This unit requires students to use several ICT and software skills:
Coronavirus (COVID-19) Update
The unit schedule/topics and any references to on-campus delivery below may no longer be relevant due to COVID-19. Please consult iLearn for latest details, and check here for updated delivery information: https://ask.mq.edu.au/account/pub/display/unit_status
A DETAILED SCHEDULE OF CONTENT AND MODULES WILL BE FOUND IN THE iLEARN SITE FOR THIS UNIT.
Macquarie University policies and procedures are accessible from Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Students seeking more policy resources can visit the Student Policy Gateway (https://students.mq.edu.au/support/study/student-policy-gateway). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
If you would like to see all the policies relevant to Learning and Teaching visit Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central).
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/study/getting-started/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to help you improve your marks and take control of your study.
The Library provides online and face to face support to help you find and use relevant information resources.
Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.
For all student enquiries, visit Student Connect at ask.mq.edu.au
If you are a Global MBA student contact globalmba.support@mq.edu.au
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.