Assessment Presentation and Submission Guidelines

Please follow these guidelines when you submit each assignment:

• Allow a left and right-hand margin of at least 2cm in all assignments.
• Please type all assignments using 12-point font and 1.5 spacing.
• All assessments must be submitted through Turnitin in .doc or .pdf format
• It is the responsibility of the student to ensure that all assessments are successfully submitted through Turnitin.
• Faculty assignment cover sheets are NOT required.

Draft Submissions & Turnitin Originality Reports

• Students may use Turnitin’s Originality Report as a learning tool to improve their academic writing if this option is made available in the unit.
• Students are strongly encouraged to upload a draft copy of each assessment to Turnitin at least one week prior to the due date to obtain an Originality Report.
• The Originality Report provides students with a similarity index that may indicate if plagiarism has occurred. Students will be able to make amendments to their drafts prior to their final submission on the due date.
• Generally, one Originality Report is generated every 24 hours up to the due date.

Please note:

• Students should regularly save a copy of all assignments before submission,
• Students are responsible for checking that their submission has been successful and has been submitted by the due date and time.

Assignment extensions and late penalties

• In general, there should be no need for extensions except through illness or misadventure that would be categorised as serious and unavoidable disruption according to the University definition of same, see:  https://students.mq.edu.au/study/my-study-program/special-consideration
• Applications for extensions must be made via AskMQ according to the Special Consideration policy. Extensions can only be granted if they meet the Special Considerations policy and are submitted via https://ask.mq.edu.au/. This will ensure consistency in the consideration of such requests is maintained.
• Late submissions without extension will receive a penalty of 5% reduction of the total possible mark for each day late (including weekends and public holidays). You are reminded that submitting even just 1 day late could be the difference between passing and failing a unit. Late penalties are applied by unit convenors or their delegates after tasks are assessed.
• No assessable work will be accepted after the return/release of marked work on the same topic. If a student is still permitted to submit on the basis of unavoidable disruption, an alternative topic may be set.
• Students should keep an electronic file of all assessments. Claims regarding "lost" assessments cannot be made if the file cannot be produced. It is also advisable to keep an electronic file of all drafts and the final submission on a USB untouched/unopened after submission. This can be used to demonstrate easily that the assessment has not been amended after the submission date.

Requesting a re-assessment of an assignment

If you have evidence that your task has been incorrectly assessed against the grade descriptors you can request a re-mark. To request a re-mark you need to contact the unit convenor within 7 days of the date of return of the assignment and provide a detailed assessment of your script against the task criteria. Evidence from your assignment must be provided to support your judgements.

Note: Failed assessments cannot be re-marked as they are all double-marked as a part of the moderation process.

Please note: The outcome of a re-mark may be a higher/lower or unchanged grade. Grades are standards referenced and effort is NOT a criterion.

Assessment Presentation and Submission Guidelines

 

Please follow these guidelines when you submit each assignment:

• Allow a left and right-hand margin of at least 2cm in all assignments.
• Please type all assignments using 12-point font and 1.5 spacing.
• All assessments must be submitted through Turnitin in .doc or .pdf format
• It is the responsibility of the student to ensure that all assessments are successfully submitted through Turnitin.
• Faculty assignment cover sheets are NOT required.

Draft Submissions & Turnitin Originality Reports

• Students may use Turnitin’s Originality Report as a learning tool to improve their academic writing if this option is made available in the unit.
• Students are strongly encouraged to upload a draft copy of each assessment to Turnitin at least one week prior to the due date to obtain an Originality Report.
• The Originality Report provides students with a similarity index that may indicate if plagiarism has occurred. Students will be able to make amendments to their drafts prior to their final submission on the due date.
• Generally, one Originality Report is generated every 24 hours up to the due date.

Please note:

• Students should regularly save a copy of all assignments before submission,
• Students are responsible for checking that their submission has been successful and has been submitted by the due date and time.

Assignment extensions and late penalties

• In general, there should be no need for extensions except through illness or misadventure that would be categorised as serious and unavoidable disruption according to the University definition of same, see:  https://students.mq.edu.au/study/my-study-program/special-consideration
• Applications for extensions must be made via AskMQ according to the Special Consideration policy. Extensions can only be granted if they meet the Special Considerations policy and are submitted via https://ask.mq.edu.au/. This will ensure consistency in the consideration of such requests is maintained.
• Late submissions without extension will receive a penalty of 5% reduction of the total possible mark for each day late (including weekends and public holidays). You are reminded that submitting even just 1 day late could be the difference between passing and failing a unit. Late penalties are applied by unit convenors or their delegates after tasks are assessed.
• No assessable work will be accepted after the return/release of marked work on the same topic. If a student is still permitted to submit on the basis of unavoidable disruption, an alternative topic may be set.
• Students should keep an electronic file of all assessments. Claims regarding "lost" assessments cannot be made if the file cannot be produced. It is also advisable to keep an electronic file of all drafts and the final submission on a USB untouched/unopened after submission. This can be used to demonstrate easily that the assessment has not been amended after the submission date.

Requesting a re-assessment of an assignment

 

If you have evidence that your task has been incorrectly assessed against the grade descriptors you can request a re-mark. To request a re-mark you need to contact the unit convenor within 7 days of the date of return of the assignment and provide a detailed assessment of your script against the task criteria. Evidence from your assignment must be provided to support your judgements.

 

Note: Failed assessments cannot be re-marked as they are all double-marked as a part of the moderation process.

Please note: The outcome of a re-mark may be a higher/lower or unchanged grade. Grades are standards referenced and effort is NOT a criterion.

 

University policy on grading

Criteria for awarding grades for assessment tasks

Assignments will be awarded grades ranging from HD to F according to guidelines set out in the University's Grading Policy. The following descriptive criteria are included for your information.

Descriptive Criteria for awarding grades in the unit

 

In order to meet the unit outcomes and successfully pass this unit, students must make a genuine attempt at all assessment tasks. Where any submitted assessment task is considered to be unsatisfactory in this regard, the highest possible final grade that can be awarded for the unit will be 45.

Students will be awarded grades ranging from HD to F according to guidelines set out in the policy: https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policies/assessment-in-effect-from-session-2-2016

The following generic grade descriptors provide university-wide standards for awarding final grades.

Grade Descriptor HD (High Distinction) Provides consistent evidence of deep and critical understanding in relation to the learning outcomes. There is substantial originality and insight in identifying, generating and communicating competing arguments, perspectives or problem solving approaches; critical evaluation of problems, their solutions and their implications; creativity in application as appropriate to the discipline. D (Distinction) Provides evidence of integration and evaluation of critical ideas, principles and theories, distinctive insight and ability in applying relevant skills and concepts in relation to learning outcomes. There is demonstration of frequent originality in defining and analysing issues or problems and providing solutions; and the use of means of communication appropriate to the discipline and the audience. Cr (Credit) Provides evidence of learning that goes beyond replication of content knowledge or skills relevant to the learning outcomes. There is demonstration of substantial understanding of fundamental concepts in the field of study and the ability to apply these concepts in a variety of contexts; convincing argumentation with appropriate coherent justification; communication of ideas fluently and clearly in terms of the conventions of the discipline. P (Pass). Provides sufficient evidence of the achievement of learning outcomes. There is demonstration of understanding and application of fundamental concepts of the field of study; routine argumentation with acceptable justification; communication of information and ideas adequately in terms of the conventions of the discipline. The learning attainment is considered satisfactory or adequate or competent or capable in relation to the specified outcomes F (Fail) Does not provide evidence of attainment of learning outcomes. There is missing or partial or superficial or faulty understanding and application of the fundamental concepts in the field of study; missing, undeveloped, inappropriate or confusing argumentation; incomplete, confusing or lacking communication of ideas in ways that give little attention to the conventions of the discipline.   Note: If you fail a unit with a professional experience component the fail grade will be on your transcript irrespective of the timing of  the placement. Withdrawing from this UG Unit If you are considering withdrawing from this unit, please seek academic advice via https://ask.mq.edu.au before doing so as this unit may be a co-requisite or prerequisite for units in the following sessions and may impact on your progression through the degree. Results Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au.

Assessment Tasks

There are three assessment tasks:

1. Engagement: Leading and Participating 

length: 10-12 minutes

Students will be required to respond to two of the weekly resources for the unit (not including week 1). Task:

1.  Summarise key ideas/issues in the reading/resource (100-150 words)
2.  Critically evaluate the arguments made and their significance to education more broadly. How does it further your understanding of current learning and teaching? (150-200 words)

Consider one or two further questions that might be prompted for you by this reading/resource. What further information/research might it prompt? (50 words) Each response has a value of 10% of your total mark.  Your grade will be based on demonstrated understanding of the reading/resource, and demonstrated level of critical thought and evaluation of the text in relation to the broader educational context and ideas raised in lectures and in online discussions in this unit. 

 

2. Research essay

length: 1500 words:

Students select a question from the weekly topics (or devise their own question relating to the topic area to be submitted to their tutor for approval) and use unit resources, lectures and further academic research to develop their response. 

 

3. Viva Voce: Concepts of education: Structured interview and discussion

Due: Held during tutorials Weeks 12 and 13

length: 10-12 minutes and short piece of writing (500 words)

Each student will prepare an A3 poster addressing their response to key questions, concepts and issues from the unit including their own research from Assessment 2. The poster will provide the basis of discussion, explanation, justification and inquiry.  The viva voce is held in groups of 3 students, however students are assessed individually.

 

Recommended texts

Duchesne, S. & McMaugh, A. (2018). Educational Psychology for Learning and Teaching. Blue Dot Books

Australian Educational Technologies Trends 2018 Report: https://drive.google.com/file/d/1FfuijAH-ENzib9hcD9PWr1zylRKIrmpH/view

Harrison, N. & Sellwood, J. (2016). Learning and Teaching in Aboriginal and Torres Strait Islander Education (3e). Melbourne: Oxford University Press. [note third edition – not second]  (also available as an ebook.

TED Talks.(2015). How the rest of the world lives: https://www.youtube.com/watch?v=u4L130DkdOw

Trucano, M (2019). World Bank blogs. https://blogs.worldbank.org/edutech/new-research-hub-use-technology-education-developing-countries

Information about the unit iLearn site  

This unit has a full web presence through iLearn. 

Students will need regular access to a computer and the Internet to complete this unit.

Weekly access to iLearn is compulsory for all students. Important assessment information will be posted here, as will other relevant unit notices and materials, including a reading template and guide to lecture note taking to assist your studies.

Various activities and materials for discussion and critical reflection are included and external students especially are encouraged to use this web component. Electronic links and suggested references will be included in the Resources section. Please check the iLearn unit regularly.

Lectures

Weekly lectures are available on the web through the ECHO360 lecture component. You must listen to all lectures if you do not attend these ‘live’.

PowerPoint slides are available in iLearn in advance of the weekly lecture and/or are available in the Active Learning Tool.

Access and technical assistance

Information for students about access to the online component of this unit is available at ilearn.mq.edu.au/login/MQ/. You will need to enter your student username and password.

Please do NOT contact the Unit Convenor regarding iLearn technical help.

No extensions will be given for any technical issues. Allow enough time for your submissions.

Assistance is available from IT Helpdesk ph: 1800 67 4357, or log a request at help.mq.edu.au. OneHelp is the online IT support service for both students and staff.

This unit requires students to use several ICT and software skills:

• Internet access: The iLearn site contains materials for this unit; it is also required for the online submission of all Assessment Tasks, and for the use of Turnitin submission for ALL tasks. 
• Word processing, visual representations, and document formatting: You are required to use an appropriate form of software to present your assignments.
• Uploading of assessment tasks to iLearn.

Structure

The unit comprises a one-hour online lecture per week, readings, online discussion and two on-campus days. Students will discuss issues and questions arising from the lectures and prescribed readings. They are expected to base their arguments/discussions on evidence from published research and other relevant material. Attendance at all tutorials is expected.  Attendance at on campus days for external students is expected. There will be a supporting website for the unit providing additional readings, links and materials. Lectures will also be available through Echo in iLearn from the following website link: http://ilearn.mq.edu.au

Students are required to participate in small group activities, whole class discussion, to read the weekly material in advance, and to complete brief tasks either as individuals or in pairs. The weekly program for the course with the accompanying readings/ preparation is available on the following pages or on the unit ILearn site.

Unit Schedule

Week	Module
1. - 24/02/20	Module 1  Introduction: Education and learning
2. - 2/3/20	Key theories of learning
3. - 9/3/20	Theories of learning
4. - 16/3/20	Module 2:  The social context of education
5. - 23/3/20	Social class as forms of capital
6. - 30/3/20	Towards an understanding of inclusive education
7. - 6/04/20	Creativity in Education
8. - 27/4/20	Module 3: The learner
9. - 4/5/20	Ability and disability in education
10. - 11/5/20	Mental health and education
11. - 18/5/20	Module 4: Learning for a sustainable future
12.- 25/5/20	Technology and education
13. - 1/06/20	Innovations in IT

Department Procedures

In addition, the following policies and procedures of the Department of Educational Studies are applicable in this unit.

Attendance for undergraduate units

All tutorials begin in Week 1 of Session.

Activities completed during weekly tutorials (internal) or on campus days (external) are essential for building the core knowledge and/or skills required to demonstrate the learning outcomes of this unit [and to meet the AITSL Graduate Teacher Standards and/or ACECQA requirements]. Attendance at all tutorials or on campus days is expected and the roll will be taken.

Students are required to attend the tutorial in which they are enrolled. Any changes to tutorial enrolments must be completed officially through e-student. Please do not contact the unit convenor requesting a change.

Unit Expectations

• Students are expected to read weekly readings before completing tasks and attending tutorials
• Students are expected to listen/attend weekly lectures before completing tasks and attending tutorials

Note: It is not the responsibility of unit staff to contact students who have failed to submit assignments.  If you have any missing items of assessment, it is your responsibility to make contact with the unit convenor.

Electronic Communication

It is the student’s responsibility to check all electronic communication on a regular weekly basis.  Communication may occur via:

• Official MQ Student Email Address
• The Dialogue function on iLearn
• Other iLearn communication functions

External Students

1. The on-campus sessions on (see below) are essential to student engagement and learning and attendance on all days is expected. Failure to attend or to have an approved Special Consideration, may result in a Fail grade for the unit. Please see attendance requirements in this unit guide. 
2. Prior to the on-campus sessions, you should have read the prescribed readings and listened to the lectures. Summarise the main points, and make a note of the key terms and definitions. Prepare any discussion questions of your own that you wish to share.
3. Please make effective use of the online component of the unit and access iLearn regularly. Keep up to date with listening to the lectures on a weekly basis.

On campus sessions

The on campus sessions for this year are on:

Day1  (9:00-5:00) : Saturday 14 March: 25a WW G08 tutorial room

Day2   (9:00-5:00): Saturday 23 May: 25a WW G08 tutorial room

Further specific details and any updates about times and locations will be posted on iLearn as an Announcement during first half of the semester.