Students

ENGG4092 – Engineering Research Thesis Extension A

2020 – Session 2, Special circumstance

Notice

As part of Phase 3 of our return to campus plan, most units will now run tutorials, seminars and other small group learning activities on campus for the second half-year, while keeping an online version available for those students unable to return or those who choose to continue their studies online.

To check the availability of face to face activities for your unit, please go to timetable viewer. To check detailed information on unit assessments visit your unit's iLearn space or consult your unit convenor.

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff Unit Convenor
Hazer Inaltekin
Contact via 9850 2280
44 WTR, Room 133
Wednesday 3pm-4pm
Lecturer
Imran Mohammed
Credit points Credit points
10
Prerequisites Prerequisites
Permission by special approval
Corequisites Corequisites
CIVL4090 or COMP4092 or ELCT4092 or ELEC4092 or MECH4092 or MTRN4092 or TELE4092
Co-badged status Co-badged status
Unit description Unit description

This unit may be taken to supplement any Engineering Research Thesis A unit and allow deeper study of the thesis topic. Students undertaking ENGG4092 will also be required to complete ENGG4093 (Engineering Research Thesis Extension B) concurrently with their corresponding discipline Thesis B unit. Students should consider taking this unit (and ENGG4093) if they are doing an industry thesis, international thesis project, or are planning to go on to higher degree research. The expectations associated with workload and contribution in this unit (and ENGG4093) supersede those in the required Engineering Research Thesis A unit (XXXX4090 or XXXX4092).

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • ULO1: Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
  • ULO2: Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
  • ULO3: Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts from the engineering discipline of your specialisation.
  • ULO4: Apply core engineering principles and practices to a research or industry challenge.
  • ULO5: Demonstrate intellectual independence and an in-depth understanding of a specialist topic, through verbal and written communication.

General Assessment Information

Grading and passing requirement for unit

In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).

For further details about grading, please refer below in the policies and procedures section.

Hurdle Requirements

The Preliminary Thesis is a hurdle requirement. A grade of 50% or more on the Preliminary Thesis is a condition of passing this unit. If you are given a second opportunity to submit your thesis as a result of failing to meet the minimum mark required, your submission will be due during the supplementary examination period and will be notified of the exact day and time by the unit convenor. The second attempt at a hurdle assessment is graded as pass fail. The maximum grade for a second attempt is the hurdle threshold grade.

Regular meetings with thesis supervisor is a hurdle requirement. See details in assessment task description.

Late submissions and Re-submissions

Late submissions will attract a penalty of 10% marks per day. Extenuating circumstances will be considered upon lodgement of a special consideration application.

Resubmissions of work are not allowed after due date.

Assessment Tasks

Name Weighting Hurdle Due
Management and Engagement 10% No All Session
Preliminary Thesis 70% Yes Week 13
Presentation 20% No Week 14-16
Meeting with Supervisors 0% Yes Week 13

Management and Engagement

Assessment Type 1: Participatory task
Indicative Time on Task 2: 10 hours
Due: All Session
Weighting: 10%

 

Students are required to actively engage with the project-related activities, and to demonstrate a professional demeanour towards project management and record-keeping. Students are also required to maintain a logbook for this unit, where dated records of day-to-day activities associated with the project are maintained.

 


On successful completion you will be able to:
  • Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
  • Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
  • Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts from the engineering discipline of your specialisation.
  • Apply core engineering principles and practices to a research or industry challenge.
  • Demonstrate intellectual independence and an in-depth understanding of a specialist topic, through verbal and written communication.

Preliminary Thesis

Assessment Type 1: Thesis
Indicative Time on Task 2: 50 hours
Due: Week 13
Weighting: 70%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)

 

Students are required to prepare a preliminary thesis report about their projects, including the literature review, project planning & design, progress and achievements. For ENGG4092, this report will supersede the discipline-based Thesis A preliminary thesis report and evidence additional progress.

 


On successful completion you will be able to:
  • Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
  • Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
  • Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts from the engineering discipline of your specialisation.
  • Apply core engineering principles and practices to a research or industry challenge.
  • Demonstrate intellectual independence and an in-depth understanding of a specialist topic, through verbal and written communication.

Presentation

Assessment Type 1: Presentation
Indicative Time on Task 2: 10 hours
Due: Week 14-16
Weighting: 20%

 

Students are required to deliver a comprehensive oral presentation about their project progress. For ENGG4092, this presentation will supersede the discipline-based Thesis A presentation and evidence additional progress.

 


On successful completion you will be able to:
  • Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
  • Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
  • Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts from the engineering discipline of your specialisation.
  • Apply core engineering principles and practices to a research or industry challenge.
  • Demonstrate intellectual independence and an in-depth understanding of a specialist topic, through verbal and written communication.

Meeting with Supervisors

Assessment Type 1: Participatory task
Indicative Time on Task 2: 5 hours
Due: Week 13
Weighting: 0%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)

 

Students are required to meet with their supervisors on a weekly basis, once the project commences. Such weekly meetings should aim to seek feedback and steer the project, and would normally last at least 15-30 minutes or more. In order to pass this unit, a student must attend at least 5 out of 10 weekly meetings from Week 4 to Week 13. Meetings can be conducted using telephone or video-conference. Meetings should be logged using the consultation meeting log sheet provided on iLearn.

 


On successful completion you will be able to:
  • Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
  • Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
  • Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts from the engineering discipline of your specialisation.
  • Apply core engineering principles and practices to a research or industry challenge.
  • Demonstrate intellectual independence and an in-depth understanding of a specialist topic, through verbal and written communication.

1 If you need help with your assignment, please contact:

  • the academic teaching staff in your unit for guidance in understanding or completing this type of assessment
  • the Writing Centre for academic skills support.

2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation

Delivery and Resources

Unit Delivery

This is a project-based unit and has no scheduled lectures or tutorial sessions. Special lectures may be organised and related announcements will be made via iLearn.

Logbook

This unit requires a logbook. The students should maintain an individual logbook which should contain a dated log of day-to-day activities undertaken in relation to the project.

Technology Used and Required

The students are required to discuss with their supervisor about the software/hardware resources required for analysis, simulation, testing and experiments related to their project. In addition, word processing software (MS Word, Latex etc.) will be required to produce the preliminary thesis and MS PowerPoint or equivalent software will be required for presentation slides.

Unit Webpage: Access from the online iLearn System at http://ilearn.mq.edu.au

Required and Recommended Texts/Materials

There is not set textbook for this unit. The students are required to discuss with their supervisor regarding required/recommended reading materials, as suited to individual project needs.

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Students seeking more policy resources can visit the Student Policy Gateway (https://students.mq.edu.au/support/study/student-policy-gateway). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

If you would like to see all the policies relevant to Learning and Teaching visit Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central).

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/study/getting-started/student-conduct​

Results

Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

Learning Skills

Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to help you improve your marks and take control of your study.

The Library provides online and face to face support to help you find and use relevant information resources. 

Student Services and Support

Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.

Student Enquiries

For all student enquiries, visit Student Connect at ask.mq.edu.au

If you are a Global MBA student contact globalmba.support@mq.edu.au

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.