Unit convenor and teaching staff |
Unit convenor and teaching staff
Convener and Tutor
Garry Falloon
Contact via Email
29 Wally's Walk Room 219
By appointment
Convener and Tutor
Dung Tran
Contact via Email
29 Wally's Walk Room 233
By appointment
|
---|---|
Credit points |
Credit points
10
|
Prerequisites |
Prerequisites
EDST8203
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
Teaching Mathematics, Science and Technology in the Primary School 2 is the second of a three unit sequence. It builds on knowledge acquired in EDST8203 in relation to the NSW Mathematics K-6 and Science and Technology K-6 syllabi. This unit aims to consolidate and extend this knowledge and to develop Teacher Education Students' capabilities in designing of effective learning programs in mathematics, and science and technologies (design and digital) that include critical examination of theory and contemporary research. Teacher Education Students are supported to develop a research-based approach that supports primary students' conceptual and developmental stages of learning in Mathematics, and Science and Technology. |
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
Assessment Presentation and Submission Guidelines
Please follow these guidelines when you submit each assignment:
Draft Submissions & Turnitin Originality Reports
Please note:
Assignment extensions and late penalties
Unless a Special Consideration request has been submitted and approved, a 5% penalty (of the total possible mark) will be applied each day a written assessment is not submitted, up until the 7th day (including weekends). After the 7th day, a mark of ‘0’ (zero) will be awarded even if the assessment is submitted. Submission time for all written assessments is set at 11.55pm. A 1-hour grace period is provided to students who experience a technical issue.
This late penalty will apply to non-timed sensitive assessment (incl essays, reports, posters, portfolios, journals, recordings, etc.). Late submission of time sensitive tasks (such as tests/exams, performance assessments/presentations, scheduled practical assessments/labs, etc.) will only be addressed by the unit convenor in a Special Consideration application. Special Consideration outcome may result in a new question or topic.
University policy on grading
Criteria for awarding grades for assessment tasks
Assignments will be awarded grades ranging from HD to F according to guidelines set out in the University's Grading Policy. The following descriptive criteria are included for your information.
Descriptive Criteria for awarding grades in the unit
In order to meet the unit outcomes and successfully pass this unit, students must make a genuine attempt at all assessment tasks. Where any submitted assessment task is considered to be unsatisfactory in this regard, the highest possible final grade that can be awarded for the unit will be 45.
Students will be awarded grades ranging from HD to F according to guidelines set out in the policy: https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policies/assessment-in-effect-from-session-2-2016
The following generic grade descriptors provide university-wide standards for awarding final grades.
Grade |
Descriptor |
HD (High Distinction) |
Provides consistent evidence of deep and critical understanding in relation to the learning outcomes. There is substantial originality and insight in identifying, generating and communicating competing arguments, perspectives or problem-solving approaches; critical evaluation of problems, their solutions and their implications; creativity in application as appropriate to the discipline. |
D (Distinction) |
Provides evidence of integration and evaluation of critical ideas, principles and theories, distinctive insight and ability in applying relevant skills and concepts in relation to learning outcomes. There is demonstration of frequent originality in defining and analysing issues or problems and providing solutions; and the use of means of communication appropriate to the discipline and the audience. |
Cr (Credit) |
Provides evidence of learning that goes beyond replication of content knowledge or skills relevant to the learning outcomes. There is demonstration of substantial understanding of fundamental concepts in the field of study and the ability to apply these concepts in a variety of contexts; convincing argumentation with appropriate coherent justification; communication of ideas fluently and clearly in terms of the conventions of the discipline. |
P (Pass). |
Provides sufficient evidence of the achievement of learning outcomes. There is demonstration of understanding and application of fundamental concepts of the field of study; routine argumentation with acceptable justification; communication of information and ideas adequately in terms of the conventions of the discipline. The learning attainment is considered satisfactory or adequate or competent or capable in relation to the specified outcomes |
F (Fail) |
Does not provide evidence of attainment of learning outcomes. There is missing or partial or superficial or faulty understanding and application of the fundamental concepts in the field of study; missing, undeveloped, inappropriate or confusing argumentation; incomplete, confusing or lacking communication of ideas in ways that give little attention to the conventions of the discipline. |
Note: If you fail a unit with a professional experience component, the fail grade will be on your transcript irrespective of the timing of the placement.
Withdrawing from this unit
If you are considering withdrawing from this unit, please seek academic advice via https://ask.mq.edu.au before doing so as this unit may be a co-requisite or prerequisite for units in the following sessions and may impact on your progression through the degree.
Results
Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au.
Name | Weighting | Hurdle | Due |
---|---|---|---|
Designing and carrying out simple science investigations for primary science | 40% | No | 23:55 26/08/2022 |
Case Study Mathematics Teaching and Learning | 60% | No | 23:59 04/11/2022 |
Assessment Type 1: Practice-based task
Indicative Time on Task 2: 35 hours
Due: 23:55 26/08/2022
Weighting: 40%
This assessment requires you to use the skills of Working Scientifically aligned with the NSW Science and Technology K-6 syllabus to plan, conduct, and communicate the findings from four (4) short science investigations. One of these will be selected, and a summary generated detailing how it could be incorporated into a larger science unit of learning.
Assessment Type 1: Case study/analysis
Indicative Time on Task 2: 35 hours
Due: 23:59 04/11/2022
Weighting: 60%
Interview one primary school student .Interpret the data from the interview to write a brief summary (report) of what the student understands about mathematical concepts and skills, drawing links between the knowledge they demonstrate and the strategies they use.
Design a lesson for the student that you believe will develop their understanding and those of other students in their class. Justify your planning decisions by using the interview data and references to mathematics education literature.
1 If you need help with your assignment, please contact:
2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation
Reys, R., Lindquist, M., Lambdin, D., Smith, N., Rogers, A., Cooke, A., Bennett, S., Ewing, B., & West, J. (2022). Helping Children Learn Mathematics (4rd Australian Edition). Wiley.
Skamp, K. & Preston, C. (Eds.) (2018). Teaching Primary Science Constructively (6th ed.). Sydney: Cengage Learning.
• This unit has a web support presence on iLearn. Students will need regular access to a computer and the Internet to complete this unit.
• Weekly access to iLearn is compulsory for all students. Important assessment information will be posted there, as will other relevant unit notices and materials, including a reading template and guide to lecture note taking to assist your studies. Various activities and materials for discussion and critical reflection are included, and external students especially are encouraged to use this web component. Electronic links and suggested references will be included in the Resources section. Please check the iLearn unit regularly.
Weekly lectorials are delivered live and recorded and posted on iLearn. You must view or listen to and/or attend all lectorials. Slides will be made available via iLearn after each weekly lectorial.
The unit comprises a one-hour (approx.) lectorial and two-hour tutorial per week. In the tutorial students will discuss issues and questions arising from the lectorials and prescribed readings. They may also engage in a range of practical tasks associated with the concepts introduced in lectorials. Students are expected to base their arguments/discussions on evidence from published research and other relevant material. Attendance at all tutorials is expected. Attendance at on campus days for Infrequent Delivery students is also expected. There will be a supporting website for the unit providing additional readings, links and materials.
Students are required to participate in group activities, whole class discussion, read the weekly material in advance, and to complete brief tasks either as individuals or in pairs or small groups. The weekly program for the course with the accompanying readings/ preparation will be available on the unit ILearn site.
Students completing this unit via Infrequent Delivery mode are expected to follow the same processes for engaging with the unit's online content as for weekday students. Dates and times for Infrequent Delivery mode students to attend separate Saturday morning sessions for Science and Technology and Mathematics unit components will be posted on iLearn.
Information for students about access to the online component of this unit is available at ilearn.mq.edu.au/login/MQ/. You will need to enter your student username and password.
Please do NOT contact the Unit Convenor regarding iLearn technical help.
No extensions will be given for any technical issues. Allow enough time for your submissions.
Assistance is available from IT Helpdesk ph: 1800 67 4357, or log a request at help.mq.edu.au. OneHelp is the online IT support service for both students and staff.
This unit requires students to use several ICT and software skills:
Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.
Unless a Special Consideration request has been submitted and approved, a 5% penalty (of the total possible mark) will be applied each day a written assessment is not submitted, up until the 7th day (including weekends). After the 7th day, a mark of ‘0’ (zero) will be awarded even if the assessment is submitted. Submission time for all written assessments is set at 11.55pm. A 1-hour grace period is provided to students who experience a technical issue.
This late penalty will apply to non-timed sensitive assessment (incl essays, reports, posters, portfolios, journals, recordings etc). Late submission of time sensitive tasks (such as tests/exams, performance assessments/presentations, scheduled practical assessments/labs etc) will only be addressed by the unit convenor in a Special consideration application. Special Consideration outcome may result in a new question or topic.
School of Education Procedures
In addition, the following policies and procedures of the School of Education are applicable in this unit.
Attendance for Master of Teaching (Primary and Secondary) units
Attendance at all synchronous activities, completion of non-synchronous formative/diagnostic class tasks and involvement in professional forums is compulsory as the Master of Teaching is a professional qualification. All students must meet the 80% attendance requirement.
Activities completed during weekly tutorials or on campus days are essential for building the core knowledge and/or skills required to demonstrate the learning outcomes of this unit and to meet the AITSL Graduate Teacher Standards. Attendance at all tutorials or on campus days is expected and the roll will be taken.
Students are required to attend the tutorial in which they are enrolled. Any changes to tutorial enrolments must be completed officially through e-student. Please do not contact the unit convenor requesting a change.
Activities completed during weekly tutorials (internal) or on campus days (external) are essential for building the core knowledge and/or skills required to demonstrate the learning outcomes of this unit [and to meet the AITSL Graduate Teacher Standards and/or ACECQA requirements]. Attendance at all tutorials or on campus days is expected and the roll will be taken.
Students are required to attend the tutorial in which they are enrolled. Any changes to tutorial enrolments must be completed officially through e-student. Please do not contact the unit convenor requesting a change.
Unit Expectations
Note: It is not the responsibility of unit staff to contact students who have failed to submit assignments. If you have any missing items of assessment, it is your responsibility to make contact with the unit convenor.
Electronic Communication
It is the student’s responsibility to check all electronic communication on a regular weekly basis. Communication may occur via:
External Students
Please make effective use of the online component of the unit and access iLearn regularly. Keep up to date with listening to the lectures on a weekly basis.
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.
The Library provides online and face to face support to help you find and use relevant information resources.
Academic Senate has approved the development of a Fitness to Practice (FTP) procedure to provide further clarity to students enrolled in practical, clinical and professional programs who have not met the requirements of the General Coursework Rules. It establishes how the University will manage the progression of students enrolled in practical, clinical or professional (PCP) programs or units listed on Schedule 3 of the Academic Progression Policy, with embedded placements and/or registration, accreditation or other mandated requirements.
The Procedure is governed by General Coursework Rules, and the Academic Progression Policy and is supported by the Inherent Requirements Framework. It provides the process to identify, notify, intervene, support, monitor and exclude when required, those students who are not meeting the FTP requirements of their program.
FTP is the demonstration of professional competence, acceptable professional behaviour, freedom from impairment and compliance with program specific requirements needed for a student to practice properly and safely throughout their practical, clinical or professional program.
Students must ensure they meet Inherent Requirements before enrolling in their program; that they have the physical, cognitive, communication and behavioural capacity to complete the program. Students with a disability or chronic health condition may have reasonable adjustments made. Students must also demonstrate that they are fit to practice and demonstrate the capabilities and professional behaviours required of that profession.
Macquarie University offers a range of Student Support Services including:
School of Education Procedures
In addition, the following policies and procedures of the School of Education are applicable in this unit.
See the university timetable for information about when classes begin in this unit. https://timetables.mq.edu.au/
Attendance for Master of Teaching (Primary and Secondary) units
Attendance at all synchronous activities, completion of non-synchronous formative/diagnostic class tasks and involvement in professional forums is compulsory as the Master of Teaching is a professional qualification. All students must meet the 80% attendance requirement.
Activities completed during weekly tutorials or on campus days are essential for building the core knowledge and/or skills required to demonstrate the learning outcomes of this unit and to meet the AITSL Graduate Teacher Standards. Attendance at all tutorials or on campus days is expected and the roll will be taken.
Students are required to attend the tutorial in which they are enrolled. Any changes to tutorial enrolments must be completed officially through e-student. Please do not contact the unit convenor requesting a change.
Unit Expectations
Note: It is not the responsibility of unit staff to contact students who have failed to submit assignments. If you have any missing items of assessment, it is your responsibility to make contact with the unit convenor.
Electronic Communication
It is the student’s responsibility to check all electronic communication on a regular weekly basis. Communication may occur via:
External Students
Got a question? Ask us via AskMQ, or contact Service Connect.
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
The 5Rs Framework, developed by the School of Education at Macquarie University, is embedded throughout your teacher education course.
Your use of the 5Rs Framework will help you develop the capabilities that will make your teaching career sustainable and fulfilling.
In this unit, you will learn using the 5Rs framework in the following important ways:
Unit information based on version 2022.03 of the Handbook