Students

ENGG8091 – Engineering Project 2

2022 – Session 1, In person-scheduled-weekday, North Ryde

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff Unit Convenor
Hazer Inaltekin
Contact via 9850 2280
44 WTR, Room 133
Monday 10am-11am
Credit points Credit points
10
Prerequisites Prerequisites
ENGG805 or ENGG8090
Corequisites Corequisites
Co-badged status Co-badged status
Unit description Unit description

Students in this unit will undertake a major project in the field of engineering, under the supervision of an academic member of staff. Where the work is carried out externally at a suitable topic, industrially-based co-supervisor may be required. At the end of the work a comprehensive research report will be submitted. The communication vehicle for this unit is primarily focused on external, public engineering project team communications as would be found at an engineering conference or symposium or for a customer or supplier in the engineering design/supply chain.

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • ULO1: Undertake a complex engineering-specific research project.
  • ULO2: Develop new knowledge, using appropriate technical and/or laboratory skills, data management and synthesis, critical analysis and interpretation of results.
  • ULO3: Communicate research results through an effective written dissertation and oral presentation to a variety of audiences in research fora.
  • ULO4: Produce technical writing and presentations at a standard that would be acceptable in a professional engineering workplace.
  • ULO5: Identify, formulate and solve complex open-ended relevant engineering problems in an ethical manner.
  • ULO6: Apply research principles, research methods, and technical standards to identify and provide solutions to complex problems in the relevant engineering discipline.

General Assessment Information

Grading and passing requirement for unit

In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).

For further details about grading, please refer below in the policies and procedures section.

Hurdle Requirements

The Preliminary Thesis is a hurdle requirement. A grade of 50% or more on the Preliminary Thesis is a condition of passing this unit. If you are given a second opportunity to submit your thesis as a result of failing to meet the minimum mark required, your submission will be due during the supplementary examination period and will be notified of the exact day and time by the unit convenor. The second attempt at a hurdle assessment is graded as pass fail. The maximum grade for a second attempt is the hurdle threshold grade.

Regular meetings with thesis supervisor is a hurdle requirement. Students are required to attend at least 6 out of 12 weekly meetings from Week 1 to Week 12. See details in assessment task description.

Late submissions and Re-submissions

Submission of the thesis reports and presentations must be undertaken at the time indicated in the unit guide. Should these activities be missed due to illness or misadventure, students may apply for Special Consideration.

All other assessments must be submitted by 5:00pm (Sydney Time) on their due date.

Should these assessments be missed due to illness or misadventure, students should apply for Special Consideration.

Assessments not submitted by the due date will receive a mark of zero.

Project Implementation 

If your project requires on-campus lab attendance and you are not able to get back to campus on time, please contact with the unit convenor and your supervisor as soon as possible. 

Assessment Tasks

Name Weighting Hurdle Due
Presentation 20% No Week 14-16
Meeting with Supervisors 0% Yes Week 13
Management and Engagement 10% No All Session
Thesis 70% Yes Week 13

Presentation

Assessment Type 1: Presentation
Indicative Time on Task 2: 10 hours
Due: Week 14-16
Weighting: 20%

 

Students are required to deliver a comprehensive oral presentation about their project outcomes at the end of the unit.

 


On successful completion you will be able to:
  • Undertake a complex engineering-specific research project.
  • Develop new knowledge, using appropriate technical and/or laboratory skills, data management and synthesis, critical analysis and interpretation of results.
  • Communicate research results through an effective written dissertation and oral presentation to a variety of audiences in research fora.
  • Produce technical writing and presentations at a standard that would be acceptable in a professional engineering workplace.
  • Identify, formulate and solve complex open-ended relevant engineering problems in an ethical manner.
  • Apply research principles, research methods, and technical standards to identify and provide solutions to complex problems in the relevant engineering discipline.

Meeting with Supervisors

Assessment Type 1: Participatory task
Indicative Time on Task 2: 5 hours
Due: Week 13
Weighting: 0%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)

 

Students are required to meet with their supervisors on a weekly basis, once the project commences. Such weekly meetings should aim to seek feedback and steer the project, and would normally last at least 15-30 minutes or more. In order to pass this unit, a student must attend at least 6 out of 12 weekly meetings from Week 1 to Week 12. Meetings can be conducted using telephone or video-conference. Meetings should be logged using the consultation meeting log sheet provided on iLearn.

 


On successful completion you will be able to:
  • Undertake a complex engineering-specific research project.
  • Develop new knowledge, using appropriate technical and/or laboratory skills, data management and synthesis, critical analysis and interpretation of results.
  • Communicate research results through an effective written dissertation and oral presentation to a variety of audiences in research fora.
  • Produce technical writing and presentations at a standard that would be acceptable in a professional engineering workplace.
  • Identify, formulate and solve complex open-ended relevant engineering problems in an ethical manner.
  • Apply research principles, research methods, and technical standards to identify and provide solutions to complex problems in the relevant engineering discipline.

Management and Engagement

Assessment Type 1: Participatory task
Indicative Time on Task 2: 10 hours
Due: All Session
Weighting: 10%

 

Students are required to actively engage with the project-related activities, and to demonstrate a professional demeanour towards project management and record-keeping. Students are also required to maintain a logbook for this unit, where dated records of day-to-day activities associated with the project are maintained.

 


On successful completion you will be able to:
  • Undertake a complex engineering-specific research project.
  • Develop new knowledge, using appropriate technical and/or laboratory skills, data management and synthesis, critical analysis and interpretation of results.
  • Communicate research results through an effective written dissertation and oral presentation to a variety of audiences in research fora.
  • Produce technical writing and presentations at a standard that would be acceptable in a professional engineering workplace.
  • Identify, formulate and solve complex open-ended relevant engineering problems in an ethical manner.
  • Apply research principles, research methods, and technical standards to identify and provide solutions to complex problems in the relevant engineering discipline.

Thesis

Assessment Type 1: Thesis
Indicative Time on Task 2: 50 hours
Due: Week 13
Weighting: 70%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)

 

Students are required to prepare a thesis report about their projects, including the literature review, technical execution of the project, discussion and understanding of results, and conclusions and added value of work.

 


On successful completion you will be able to:
  • Undertake a complex engineering-specific research project.
  • Develop new knowledge, using appropriate technical and/or laboratory skills, data management and synthesis, critical analysis and interpretation of results.
  • Communicate research results through an effective written dissertation and oral presentation to a variety of audiences in research fora.
  • Produce technical writing and presentations at a standard that would be acceptable in a professional engineering workplace.
  • Identify, formulate and solve complex open-ended relevant engineering problems in an ethical manner.
  • Apply research principles, research methods, and technical standards to identify and provide solutions to complex problems in the relevant engineering discipline.

1 If you need help with your assignment, please contact:

  • the academic teaching staff in your unit for guidance in understanding or completing this type of assessment
  • the Writing Centre for academic skills support.

2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation

Delivery and Resources

Unit Delivery

This is a project-based unit and has no scheduled lectures or tutorial sessions. Special lectures may be organised and related announcements will be made via iLearn.

Logbook

This unit requires a logbook. The students should maintain an individual logbook which should contain a dated log of day-to-day activities undertaken in relation to the project.

Technology Used and Required

The students are required to discuss with their supervisor about the software/hardware resources required for analysis, simulation, testing and experiments related to their project. In addition, word processing software (MS Word, Latex etc.) will be required to produce the preliminary thesis and MS PowerPoint or equivalent software will be required for presentation slides.

Unit Webpage: Access from the online iLearn System at http://ilearn.mq.edu.au

Required and Recommended Texts/Materials

There is not set textbook for this unit. The students are required to discuss with their supervisor regarding required/recommended reading materials, as suited to individual project needs.

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct

Results

Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au

Academic Integrity

At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

The Writing Centre

The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.

The Library provides online and face to face support to help you find and use relevant information resources. 

Student Services and Support

Macquarie University offers a range of Student Support Services including:

Student Enquiries

Got a question? Ask us via AskMQ, or contact Service Connect.

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.

Engineers Australia Competency Mapping

EA Competency Standard

Unit Learning Outcomes

Knowledge and Skill Base

1.1 Comprehensive, theory-based understanding of the underpinning fundamentals applicable to the engineering discipline.

 

1.2 Conceptual understanding of underpinning maths, analysis, statistics, computing.

 

1.3 In-depth understanding of specialist bodies of knowledge

 

1.4 Discernment of knowledge development and research directions

ULO1, ULO2

1.5 Knowledge of engineering design practice

 

1.6 Understanding of scope, principles, norms, accountabilities of sustainable engineering practice.

ULO6

Engineering Application Ability

2.1 Application of established engineering methods to complex problem solving

ULO5, ULO6

2.2 Fluent application of engineering techniques, tools and resources.

ULO2, ULO5, ULO6

2.3 Application of systematic engineering synthesis and design processes.

ULO2

2.4 Application of systematic approaches to the conduct and management of engineering projects.

ULO1

Professional and Personal Attributes

3.1 Ethical conduct and professional accountability.

ULO4, ULO5

3.2 Effective oral and written communication in professional and lay domains.

ULO3, ULO4

3.3 Creative, innovative and pro-active demeanour.

 

3.4 Professional use and management of information.

ULO2, ULO4

3.5 Orderly management of self, and professional conduct.

ULO3

3.6 Effective team membership and team leadership

 

Unit information based on version 2022.02 of the Handbook