Assessment Presentation and Submission Guidelines

Please follow these guidelines when you submit each assignment:

• Allow a left and right-hand margin of at least 2cm in all assignments.
• Please type all assignments using 12-point font and 1.5 spacing.
• All assessments must be submitted through Turnitin in .doc or .pdf format
• It is the responsibility of the student to ensure that all assessments are successfully submitted through Turnitin.
• Faculty assignment cover sheets are NOT required.

 

Draft Submissions & Turnitin Originality Reports

• Students may use Turnitin’s Originality Report as a learning tool to improve their academic writing if this option is made available in the unit.
• Students are strongly encouraged to upload a draft copy of each assessment to Turnitin at least one week prior to the due date to obtain an Originality Report.
• The Originality Report provides students with a similarity index that may indicate if plagiarism has occurred. Students will be able to make amendments to their drafts prior to their final submission on the due date.
• Generally, one Originality Report is generated every 24 hours up to the due date.

 

Please note:

• Students should regularly save a copy of all assignments before submission.
• Students are responsible for checking that the correct file has been uploaded, that their submission has been successful, and that it has been submitted by the due date and time.

 

Assignment extensions and late penalties

• In general, there should be no need for extensions except through illness or misadventure that would be categorised as serious and unavoidable disruption according to the University definition of same, see:  https://students.mq.edu.au/study/my-study-program/special-consideration

 

• Please note: You cannot request an extension from your tutor or the Unit Convenor. 

 

• Applications for extensions must be made via AskMQ according to the Special Consideration policy. Extensions can only be granted if they meet the Special Considerations policy and are submitted via https://ask.mq.edu.au/. This will ensure consistency in the consideration of such requests is maintained.

 

• Late submissions: Unless a Special Consideration request has been submitted and approved, (a) a penalty for lateness will apply - 10/100 marks of credit (10% of the total assessment weighting) will be deducted per day for assignments submitted after the due date – and (b) no assignment will be accepted seven days (incl. weekends) after the original submission deadline. No late submissions will be accepted for timed assessment - e.g., quizzes, online tests. A zero result for the assignment will be recorded after the late submission period has ended if no task has been received.

 

• If a student is still permitted to submit on the basis of unavoidable disruption, an alternative topic may be set.

 

• Students should keep an electronic file of all assessments. Claims regarding "lost" assessments cannot be made if the file cannot be produced. It is also advisable to keep an electronic file of all drafts and the final submission on a USB untouched/unopened after submission. This can be used to demonstrate easily that the assessment has not been amended after the submission date.

 

Requesting a re-assessment of an assignment

If you have evidence that your task has been incorrectly assessed against the grade descriptors you can request a re-mark. To request a re-mark you need to contact the unit convenor within 7 days of the date of return of the assignment and provide a detailed assessment of your script against the task criteria. Evidence from your assignment must be provided to support your judgements.

Note:

• Please do not request a re-mark for a Failed assessment as they are all double-marked as a part of the moderation process.
• The outcome of a re-mark may be a higher/lower or unchanged grade.
• Grades are standards referenced and effort is NOT a criterion.

Units with Quiz Assessments

Online quizzes are an individual assessment task and MUST BE COMPLETED by each student individually. Similarities in responses between students will be checked and investigated for possible collusion.

 

University policy on grading

Criteria for awarding grades for assessment tasks

Assignments will be awarded grades ranging from HD to F according to guidelines set out in the University's Grading Policy. The following descriptive criteria are included for your information.

 

Descriptive Criteria for awarding grades in the unit

In order to meet the unit outcomes and successfully pass this unit, students must make a genuine attempt at all assessment tasks. Where any submitted assessment task is considered to be unsatisfactory in this regard, the highest possible final grade that can be awarded for the unit will be 45.

 

Students will be awarded grades ranging from HD to F according to guidelines set out in the policy: https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policies/assessment-in-effect-from-session-2-2016

 

The following generic grade descriptors provide university-wide standards for awarding final grades.

Grade	Descriptor
HD (High Distinction)	Provides consistent evidence of deep and critical understanding in relation to the learning outcomes. There is substantial originality and insight in identifying, generating and communicating competing arguments, perspectives or problem-solving approaches; critical evaluation of problems, their solutions and their implications; creativity in application as appropriate to the discipline.
D (Distinction)	Provides evidence of integration and evaluation of critical ideas, principles and theories, distinctive insight and ability in applying relevant skills and concepts in relation to learning outcomes. There is demonstration of frequent originality in defining and analysing issues or problems and providing solutions; and the use of means of communication appropriate to the discipline and the audience.
Cr (Credit)	Provides evidence of learning that goes beyond replication of content knowledge or skills relevant to the learning outcomes. There is demonstration of substantial understanding of fundamental concepts in the field of study and the ability to apply these concepts in a variety of contexts; convincing argumentation with appropriate coherent justification; communication of ideas fluently and clearly in terms of the conventions of the discipline.
P (Pass).	Provides sufficient evidence of the achievement of learning outcomes. There is demonstration of understanding and application of fundamental concepts of the field of study; routine argumentation with acceptable justification; communication of information and ideas adequately in terms of the conventions of the discipline. The learning attainment is considered satisfactory or adequate or competent or capable in relation to the specified outcomes
F (Fail)	Does not provide evidence of attainment of learning outcomes. There is missing or partial or superficial or faulty understanding and application of the fundamental concepts in the field of study; missing, undeveloped, inappropriate or confusing argumentation; incomplete, confusing or lacking communication of ideas in ways that give little attention to the conventions of the discipline.

Note: If you fail a unit with a professional experience component, the fail grade will be on your transcript irrespective of the timing of the placement.

 

Withdrawing from this unit

If you are considering withdrawing from this unit, please seek academic advice via https://ask.mq.edu.au before doing so as this unit may be a co-requisite or prerequisite for units in the following sessions and may impact on your progression through the degree.

 

Results

Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au.

 

Required and recommended texts

Required readings and other recommended texts will be listed in iLearn and available via the Library or in the iLearn site.

Information about the unit iLearn site 

This unit has a full web presence through iLearn. 

Students will need regular access to a computer and the Internet to complete this unit.

Weekly access to iLearn is compulsory for all students. Important assessment information will be posted here, as will relevant unit notices and other materials, including assignment templates or guides, to assist your studies and successful assignment competion.

Various activities and materials for discussion and critical reflection are included and online or infrequent/external students especially are reminded that this iLearn website is your only way to access the unit content and successfully participate in the unit. 

You should check the iLearn unit regularly as this is where Convenor Announcements, Assignment FAQs and other essential content will appear.

Weekly lectures/podcasts are available on the web through the ECHO360 lecture component. You must listen to all lecture/podcast content. 

Access and technical assistance

Information for students about access to the online component of this unit is available at https://ilearn.mq.edu.au/login/index.php. You will need to enter your student username and password.

Please do NOT contact the Unit Convenor regarding iLearn technical help.

No extensions will be given for any technical issues. Allow enough time for your submissions.

Assistance is available from IT Helpdesk ph: 1800 67 4357 or log a request at help.mq.edu.au. OneHelp is the online IT support service for both students and staff.

This unit requires students to use several ICT and software skills:

• Internet access: The iLearn site contains materials for this unit; it is also required for the online submission of all Assessment Tasks, and for the use of Turnitin submission for ALL tasks. 
• Word processing, visual representations, and document formatting: You are required to use an appropriate form of software to present your assignments. If you are directed to use a specific form of software then you must use this software as directed. 
• Online participation, camera, microphone, speakers and other presentation software: If you choose the online learning mode you are expected to join weekly tutorials or other activities via software such as Zoom and are required to have a camera switched on, microphone and speakers available,  so you can listen and contribute to discussions and activities. Please plan your online learning and tutorial participation carefully and make sure you are in a space where you can speak aloud and contribute to all online learning activities as required. 
• Uploading of assessment tasks to iLearn. You are responsible for ensuring you have a suitable internet connection to upload your assignments. 

Structure

The unit has 13-weeks of teaching and comprises two online lecture/podcasts or flipped content delivery and one one-hour face to face or online tutorial each week. In the lectures the Unit Convenor will supply essential information that is required for teacher accreditation and meeting essential AITSL requirements for graduate teacher knowledge. In the tutorial students will discuss issues and questions arising from the lectures and prescribed readings or other scheduled activities. You are expected to base your tutorial contributions, any arguments or discussions on evidence from these lectures, readings, published research and other relevant material. The supporting website for the unit provides additional readings, links and materials. Lectures will also be available through ECHO in iLearn from the following website link: http://ilearn.mq.edu.au

In both face to face and online modes all students are required to participate in small group activities, whole class discussion, to read the weekly material in advance, and to complete brief tasks either as individuals or in pairs. The weekly program for the course with the accompanying readings/ preparation is available on the unit iLearn site.

The unit schedule is available in the ilearn site for this unit. 

Each offering the assessment tasks, readings and activities may be changed. 

The 5Rs Framework, developed by the School of Education at Macquarie University, is embedded throughout your teacher education course. Your use of the 5Rs Framework will help you develop the capabilities that will make your teaching career sustainable and fulfilling. In this unit, you will learn using the 5Rs framework in the following important ways:

Resilience: This unit requires students to familiarise themselves with the 5r's and the concept of resilience and students will interact with these concepts; assessment and feedback is a formative process that requires the competencies of self-regulation, self-efficacy and support seeking, which are critical components of our capacity to be resilient. 

Reflexive: This unit teaches key concepts of education in a reflexive stance that requires students to interact with and engage with their own beliefs and understandings of these concepts. 

Responsive: Activities and tasks require students to practice the application of concepts to teaching and learning activities and demonstrate practical and reflexive engagement with concepts. 

Ready to learn: This unit is supported and scaffolded with a structured iLearn site however students must demonstrate readiness to learn by scheduling their own listening time for online lectures/podcasts, completion of weekly readings and activties, and preparedness for tutorials and assessment tasks. Assessment tasks support readiness skills by promoting revision of weekly learning materials and readiness to engage in research so support evidence-based practice. 

Research Engaged: Unit readings and assessments tasks draw on published and/or peer reviewed research and students are offered a choice of assessment topics with which to demonstrate research engagement.