Students

COMP4092 – Software Engineering Research Thesis A

2023 – Session 1, In person-scheduled-weekday, North Ryde

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff
Kate Stefanov
kate.stefanov@mq.edu.au
Credit points Credit points
10
Prerequisites Prerequisites
(COMP332 or COMP3000) and (COMP333 or COMP3010) and (COMP335 or COMP3100)
Corequisites Corequisites
(COMP430 or COMP4050) or (COMP434 or COMP4060)
Co-badged status Co-badged status
Unit description Unit description

In this unit students will conduct the first half of an individual research thesis project on a topic in the Software Engineering major under the direction of an academic supervisor. The focus of the work will be on developing the project proposal, conducting the literature review and project planning and design.

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • ULO1: Analyse a complex software engineering problem and define discipline specific research questions that require the development of new knowledge or research into cutting-edge techniques.
  • ULO2: Plan a major software engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
  • ULO3: Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in software engineering.
  • ULO4: Apply core software engineering principles, practices, and research methods to a research or industry challenge.
  • ULO5: Demonstrate intellectual independence, and an in-depth understanding of a specialist topic within software engineering through verbal and written communication.

General Assessment Information

Grading and passing requirement for unit

In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).

For further details about grading, please refer below in the policies and procedures section.

Hurdle Requirements

The Preliminary Thesis is a hurdle requirement. A grade of 50% or more on the Preliminary Thesis is a condition of passing this unit. If you are given a second opportunity to submit your thesis as a result of failing to meet the minimum mark required, your submission will be due during the supplementary examination period and will be notified of the exact date and time by the unit convenor. The second attempt at a hurdle assessment is graded as pass fail. The maximum grade for a second attempt is the hurdle threshold grade.

Regular meetings with thesis supervisor is a hurdle requirement. Students are required to attend at least 5 out of 10 weekly meetings from Week 4 to Week 13. See details in assessment task description.

Late submissions and Re-submissions

All assessments must be submitted by 23:55pm (Sydney Time) on their due date. Should the activities be missed due to illness or misadventure, students may apply for Special Consideration.

  • Preliminary Thesis Report: Late penalty applies unless there is an approved special consideration request. Resubmissions are not allowed. 
  • Presentation: Late submissions are not allowed unless there is an approved special consideration request. Special considerations for presentations are approved only if there are long delays due to extenuating circumstances. Resubmissions are not allowed. 
  • Logbooks (Management and Engagement): Late penalty applies unless there is an approved special consideration request. Resubmissions are not allowed. 

The Special Consideration Policy aims to support students who have been impacted by short-term circumstances or events that are serious, unavoidable and significantly disruptive, and which may affect their performance in assessment.

Written Assessments

If you experience circumstances or events that affect your ability to complete the written assessments in this unit on time, please inform the convenor and submit a Special Consideration request through ask.mq.edu.au. See details of the Special Consideration Policy below.

Project Implementation 

If your project requires on-campus lab attendance and you are not able to get back to campus on time, please contact with the unit convenor and your supervisor as soon as possible. 

Assessment Tasks

Name Weighting Hurdle Due
Meetings with supervisors and clients 0% Yes All Session
Engineering Management and Engagement 10% No Week 13
Research Plan Presentation 20% No Week 14-16
Preliminary Thesis Material 70% Yes Week 13

Meetings with supervisors and clients

Assessment Type 1: Simulation/role play
Indicative Time on Task 2: 5 hours
Due: All Session
Weighting: 0%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)

 

Regular meetings with clients are essential for quality software engineering

 
On successful completion you will be able to:
  • Plan a major software engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
  • Demonstrate intellectual independence, and an in-depth understanding of a specialist topic within software engineering through verbal and written communication.

Engineering Management and Engagement

Assessment Type 1: Field book
Indicative Time on Task 2: 10 hours
Due: Week 13
Weighting: 10%

 

An opportunity to demonstrate (and if necessary, learn) the principles of good engineering management, record keeping, and professional engagement

 
On successful completion you will be able to:
  • Plan a major software engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
  • Apply core software engineering principles, practices, and research methods to a research or industry challenge.

Research Plan Presentation

Assessment Type 1: Presentation
Indicative Time on Task 2: 10 hours
Due: Week 14-16
Weighting: 20%

 

A face-to-face presentation of the proposed research, including background, reasoning and methodology.

 
On successful completion you will be able to:
  • Analyse a complex software engineering problem and define discipline specific research questions that require the development of new knowledge or research into cutting-edge techniques.
  • Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in software engineering.

Preliminary Thesis Material

Assessment Type 1: Plan
Indicative Time on Task 2: 50 hours
Due: Week 13
Weighting: 70%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)

 

A major piece of work towards the thesis that will be submitted at the end of the succeeding unit COMP4093, this document details the plan of work, relevant literature, methodological issues, and a timeline for COMP4093.

 
On successful completion you will be able to:
  • Analyse a complex software engineering problem and define discipline specific research questions that require the development of new knowledge or research into cutting-edge techniques.
  • Plan a major software engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
  • Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in software engineering.
  • Apply core software engineering principles, practices, and research methods to a research or industry challenge.

1 If you need help with your assignment, please contact:

  • the academic teaching staff in your unit for guidance in understanding or completing this type of assessment
  • the Writing Centre for academic skills support.

2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation

Delivery and Resources

Unit Delivery

This is a project-based unit. Development of knowledge and skills will be guided by both weekly sessions with the unit convenor and also regular interaction with your supervisor.

The one-hour sessions (lectures / workshops / discussions) with the unit convenor start in week 1.

You are strongly recommended to meet with your supervisor on a weekly basis, once the project commences. Weekly meetings should aim to seek feedback and steer the project, and would normally last at least 15-30 minutes or more. Meetings can be conducted using telephone or video-conference. Outcomes of a minimum of five meetings must be documented using the meeting log sheet provided on iLearn to meet this hurdle assessment task.

Logbook

This unit requires a logbook. The students should maintain an individual logbook which should contain a dated log of day-to-day activities undertaken in relation to the project.

Technology Used and Required

The students are required to discuss with their supervisor about the software/hardware resources required for analysis, simulation, testing and experiments related to their project. In addition, word processing software (MS Word, Latex etc.) will be required to produce the preliminary thesis and MS PowerPoint or equivalent software will be required for presentation slides.

Unit Webpage

Access from the online iLearn System at http://ilearn.mq.edu.au

Required and Recommended Texts/Materials

There is not set textbook for this unit. The students are required to discuss with their supervisor regarding required/recommended reading materials, as suited to individual project needs.

Communication

We will communicate with you via your university email or through announcements on iLearn. Queries to convenors can either be placed on the iLearn discussion board or sent via email to the convenor's address from your university email address.

COVID Information

For the latest information on the University’s response to COVID-19, please refer to the Coronavirus infection page on the Macquarie website: https://www.mq.edu.au/about/coronavirus-faqs. Remember to check this page regularly in case the information and requirements change during semester. If there are any changes to this unit in relation to COVID, these will be communicated via iLearn.

 

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct

Results

Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au

Academic Integrity

At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

The Writing Centre

The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.

The Library provides online and face to face support to help you find and use relevant information resources. 

Student Services and Support

Macquarie University offers a range of Student Support Services including:

Student Enquiries

Got a question? Ask us via AskMQ, or contact Service Connect.

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/. 

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.

Engineers Australia Competency Mapping

EA Competency Standard

Unit Learning Outcomes

Knowledge and Skill Base

1.1 Comprehensive, theory-based understanding of the underpinning fundamentals applicable to the engineering discipline.

 

1.2 Conceptual understanding of underpinning maths, analysis, statistics, computing.

 

1.3 In-depth understanding of specialist bodies of knowledge

ULO1, ULO3

1.4 Discernment of knowledge development and research directions

ULO3

1.5 Knowledge of engineering design practice

ULO3

1.6 Understanding of scope, principles, norms, accountabilities of sustainable engineering practice.

 ULO3

Engineering Application Ability

2.1 Application of established engineering methods to complex problem solving

 ULO1, ULO4

2.2 Fluent application of engineering techniques, tools and resources.

ULO4

2.3 Application of systematic engineering synthesis and design processes.

ULO4

2.4 Application of systematic approaches to the conduct and management of engineering projects.

ULO2, ULO4

Professional and Personal Attributes

3.1 Ethical conduct and professional accountability.

 

3.2 Effective oral and written communication in professional and lay domains.

ULO2, ULO5

3.3 Creative, innovative and pro-active demeanour.

ULO5

3.4 Professional use and management of information.

ULO2

3.5 Orderly management of self, and professional conduct.

ULO2, ULO5

3.6 Effective team membership and team leadership

Unit information based on version 2023.02 of the Handbook