Students

ENGG1000 – Introduction to Engineering

2023 – Session 2, In person-scheduled-weekday, North Ryde

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff Unit Convenor
June Ho
june.ho@mq.edu.au
Contact via Via-email
Level 1, 50 Waterloo Road, School of Engineering
Via appointment
Unit Co-Convenor
Noushin Nasiri
noushin.nasiri@mq.edu.au
Contact via Via-email
Room 135, 3 Management Drive, Main Campus
Via appointment
Credit points Credit points
10
Prerequisites Prerequisites
Corequisites Corequisites
Co-badged status Co-badged status
Unit description Unit description

The 1st SPINE unit aimed to develop professional, transferable and employability skills. The unit has two objectives; 1) to develop the required self-management skills to be successful in the field of engineering. this includes time management skills, professional behaviour, empathy and metacognitive skills. 2) to develop related and transferable hands-on prototyping skills through a serious of workshops. In the process, students will be able to contextualise their learning and develop basic fundamental prototyping skills required for them to be involved in a team-based project by the subsequent SPINE unit.

The SPINE units are serious of scaffolded units across the engineering curriculum that aims to develop self-agency and self-efficacy that will help you transition into University study.

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • ULO1: Demonstrate practical skills in prototyping engineering designs.
  • ULO2: Follow safe working procedures when working with others.
  • ULO3: Apply strategies and tools to organise and conduct knowledge discovery independently.
  • ULO4: Work and interact in accordance to the code of ethics and guidelines of engineering accreditation organisations.
  • ULO5: Articulate independent thinking and effectively communicate ideas and concepts.

General Assessment Information

Grading and passing requirement for unit

In order to pass this unit, a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).

There is no hurdle assessment in this unit.

Online quizzes, in-class activities, or scheduled tests and exam must be undertaken at the time indicated in the unit guide. Should these activities be missed due to illness or misadventure, students may apply for Special Consideration.

All other assessments must be submitted by 11:55 pm on their due date. Should these assessments be missed due to illness or misadventure, students should apply for Special Consideration.

Late Assessment Submission

Late assessments are not accepted in this unit unless a Special Consideration has been submitted and approved.

Assessment Tasks

Name Weighting Hurdle Due
Reflective writing 10% No Week 7 & Week 13
Quizzes 30% No Week 5 & Week 10
Prototyping skill development 2 20% No Week 13
Prototyping skill development 1 20% No Week 7
Weekly Practice-based Tasks 20% No Weekly (week 2-13)

Reflective writing

Assessment Type 1: Reflective Writing
Indicative Time on Task 2: 5 hours
Due: Week 7 & Week 13
Weighting: 10%

 

Reflective writing on learning experiences and transferable skills gained. Refer to iLearn for more information.

 
On successful completion you will be able to:
  • Apply strategies and tools to organise and conduct knowledge discovery independently.
  • Work and interact in accordance to the code of ethics and guidelines of engineering accreditation organisations.
  • Articulate independent thinking and effectively communicate ideas and concepts.

Quizzes

Assessment Type 1: Quiz/Test
Indicative Time on Task 2: 15 hours
Due: Week 5 & Week 10
Weighting: 30%

 

Quizzes on professional development topics. Refer to iLearn for more information.

 
On successful completion you will be able to:
  • Follow safe working procedures when working with others.
  • Apply strategies and tools to organise and conduct knowledge discovery independently.
  • Articulate independent thinking and effectively communicate ideas and concepts.

Prototyping skill development 2

Assessment Type 1: Design Implementation
Indicative Time on Task 2: 10 hours
Due: Week 13
Weighting: 20%

 

This is the 2nd skill development activity. Similar to the 1st skill development, it emphases on the hands prototyping skill required in any engineering field. The skill allocation will be assigned in week 1 as well.

The iterative exposure to new skills development is also to develop the required metacognitive skills in being successful with embarking with new knowledge fields. To put it simply is learning to learn.

 
On successful completion you will be able to:
  • Demonstrate practical skills in prototyping engineering designs.
  • Follow safe working procedures when working with others.
  • Articulate independent thinking and effectively communicate ideas and concepts.

Prototyping skill development 1

Assessment Type 1: Design Implementation
Indicative Time on Task 2: 10 hours
Due: Week 7
Weighting: 20%

 

Developing the required hands-on competency relating to a chosen engineering field. The hands-on skill development will be translatable across other engineering domains. The skills will be chosen based on a preference selection during week 1. The availability of the skills will be dependent on whether students choose to engage in face-to-face mode or via online medium. Some skills are only available in face-to-face mode.

Example of cross-disciplinary hands-on skills: Technical drawing skill is an underpinning skill in both mechanical and civil engineering design communication.

 
On successful completion you will be able to:
  • Demonstrate practical skills in prototyping engineering designs.
  • Follow safe working procedures when working with others.
  • Articulate independent thinking and effectively communicate ideas and concepts.

Weekly Practice-based Tasks

Assessment Type 1: Practice-based task
Indicative Time on Task 2: 15 hours
Due: Weekly (week 2-13)
Weighting: 20%

 

Development of knowledge and skills requires continual practice at authentic problems and datasets. During each weekly workshop, you will need to complete a set task which will be marked in class.

Each week will be worth 2 marks out of a total of 100

 

 
On successful completion you will be able to:
  • Demonstrate practical skills in prototyping engineering designs.
  • Work and interact in accordance to the code of ethics and guidelines of engineering accreditation organisations.

1 If you need help with your assignment, please contact:

  • the academic teaching staff in your unit for guidance in understanding or completing this type of assessment
  • the Writing Centre for academic skills support.

2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation

Delivery and Resources

All slides and materials, recommended book list and pdfs will be provided on iLearn.

Unit Schedule

Refer to iLearn for detailed schedule

Week 1

There will be no pracs/SGTAs in week 1. The SGTAs will start from Week 2.

Methods of Communication

We will communicate with you via your university email or through announcements on iLearn. Queries to convenors can either be placed on the iLearn discussion board or sent to june.ho@mq.edu.au from your university email address.

COVID Information

For the latest information on the University’s response to COVID-19, please refer to the Coronavirus infection page on the Macquarie website: https://www.mq.edu.au/about/coronavirus-faqs. Remember to check this page regularly in case the information and requirements change during semester. If there are any changes to this unit in relation to COVID, these will be communicated via iLearn.

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct

Results

Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au

Academic Integrity

At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

The Writing Centre

The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.

The Library provides online and face to face support to help you find and use relevant information resources. 

Student Services and Support

Macquarie University offers a range of Student Support Services including:

Student Enquiries

Got a question? Ask us via AskMQ, or contact Service Connect.

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/. 

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.

Changes from Previous Offering

N/A

Engineers Australia Competency Mapping

EA Competency Standard Unit Learning Outcomes
Knowledge and Skill Base 1.1 Comprehensive, theory-based understanding of the underpinning fundamentals applicable to the engineering discipline. ULO1
1.2 Conceptual understanding of underpinning maths, analysis, statistics, computing. ULO1
1.3 In-depth understanding of specialist bodies of knowledge ULO1
1.4 Discernment of knowledge development and research directions ULO3
1.5 Knowledge of engineering design practice ULO1,ULO2
1.6 Understanding of scope, principles, norms, accountabilities of sustainable engineering practice.  
Engineering Application Ability 2.1 Application of established engineering methods to complex problem solving ULO1
2.2 Fluent application of engineering techniques, tools and resources. ULO3
2.3 Application of systematic engineering synthesis and design processes. ULO5
2.4 Application of systematic approaches to the conduct and management of engineering projects. ULO2
Professional and Personal Attributes 3.1 Ethical conduct and professional accountability. ULO2,ULO4
3.2 Effective oral and written communication in professional and lay domains. ULO5
3.3 Creative, innovative and pro-active demeanour. ULO5
3.4 Professional use and management of information.  
3.5 Orderly management of self, and professional conduct. ULO2
3.6 Effective team membership and team leadership ULO2

Unit information based on version 2023.04 of the Handbook