Students

ELCT4004 – Power Systems Analysis

2023 – Session 1, In person-scheduled-weekday, North Ryde

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff Convenor/Lecturer
Foad Taghizadeh
foad.taghizadeh@mq.edu.au
Contact via Email
Room #124, Level 1, 44 WTR
Friday 2:00 PM - 4:00 PM, by appointment only
Lab demonstrator
Farzan Tahir
farzan.tahir@mq.edu.au
Contact via Email
Credit points Credit points
10
Prerequisites Prerequisites
(ELEC2005 or ELCT2005 or ELEC295) and (ELCT3006 or ELEC396)
Corequisites Corequisites
Co-badged status Co-badged status
Unit description Unit description

The course will provide students with essential knowledge in the mathematical techniques to analyse power systems during steady-state and transient operations of power systems with large-scale distributed generation and energy storage systems. It will provide strong foundation in classical methods and modern techniques in power systems for senior level electrical engineering students for analysing system's performance with renewable generators, new loads (EV) and storage. Topics covered comprise: review of the basic concepts used in power system analysis: phasors, complex power, three phase systems and per-unit; application of network matrices techniques and power flow analysis to study the steady-state and dynamic behaviour of power systems with distributed energy resources; power system fault calculations including: symmetrical components, symmetrical faults, and unsymmetrical faults ; power system stability and control in the presence of variable sources, loads and storage; An overview of power system protection principles; voltage stability in smart grids, the impact of power system analysis in the context of smart grid, transmission and distribution systems, insulators and substation.

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • ULO1: Identify the operational characteristics of different transmission lines for electrical power networks.
  • ULO2: Calculate the steady state and dynamic stability of power systems with the application of network matrix and power flow analysis.
  • ULO3: Analyse the stability of power systems with symmetrical and unsymmetrical faults.
  • ULO4: Demonstrate knowlege and understanding of power system protection principles, transmission and distribution systems, insulators and substations.
  • ULO5: Work effectively in teams by: identifying individual roles and responsibilities, sharing knowledge through peer-led learning, writing technical reports and logbooks, and effective communications.

General Assessment Information

Grading and Passing Requirement for Unit

  • In order to pass this Unit a student must obtain a mark of 50 or more for the Unit (i.e. obtain a passing grade P, CR, D, or HD).
  • For further details about grading, please refer below in the policies and procedures section.
  • If you receive special consideration for the oral presentation and demonstration of the Project, a supplementary conventional exam will be scheduled by the faculty during a supplementary exam period, typically about 3 to 4 weeks after the normal exam period. By making a special consideration application for the oral presentation and demonstration of the Project you are declaring yourself available for a conventional exam during the supplementary examination period and will not be eligible for a second special consideration approval based on pre-existing commitments. Please ensure you are familiar with the policy prior to applying. Approved applicants will receive an individual notification one week prior to the exam with the exact date and time of their supplementary examination.

Late Assessment Submission Penalty 

Unless a Special Consideration request has been submitted and approved, a 5% penalty (of the total possible mark of the task) will be applied for each day a written assessment is not submitted, up until the 7th day (including weekends). After the 7th day, a grade of '0' will be awarded even if the assessment is submitted. The submission time for all uploaded assessments is 11:55 pm. A 1-hour grace period is provided to students who experience a technical concern. 

For any late submission of time-sensitive tasks, such as scheduled tests/exams, performance assessments/presentations, and/or scheduled practical assessments/labs, please apply for Special Consideration.  

Assessments where Late Submissions will be accepted 

In this unit, late submissions will be accepted as follows: 

Practical Assignment – YES, Standard Late Penalty applies 

Pre-Class Quiz & Mid-Term Quiz - NO, unless Special Consideration is Granted 

Project Assessment – YES, Standard Late Penalty applies 

Special Consideration

The Special Consideration Policy aims to support students who have been impacted by short-term circumstances or events that are serious, unavoidable and significantly disruptive, and which may affect their performance in assessment. If you experience circumstances or events that affect your ability to complete the assessments in this unit on time, please inform the convenor and submit a Special Consideration request through ask.mq.edu.au.

Assessment Tasks

Name Weighting Hurdle Due
Pre- Class Quiz (Lectorial) 10% No Weeks 2-7
Class Quiz (Lectorials) 20% No Week 8
Practical 20% No Weeks 2-7
Project 50% No Weeks 13 & 14

Pre- Class Quiz (Lectorial)

Assessment Type 1: Quiz/Test
Indicative Time on Task 2: 5 hours
Due: Weeks 2-7
Weighting: 10%

 

Students are expected to go through the iLearn content, understand the theory and attempt the online quiz every week prior to in class activities (lectorials).

 
On successful completion you will be able to:
  • Identify the operational characteristics of different transmission lines for electrical power networks.
  • Calculate the steady state and dynamic stability of power systems with the application of network matrix and power flow analysis.
  • Analyse the stability of power systems with symmetrical and unsymmetrical faults.

Class Quiz (Lectorials)

Assessment Type 1: Quiz/Test
Indicative Time on Task 2: 8 hours
Due: Week 8
Weighting: 20%

 

A quiz is scheduled right after the midsemester break. The quiz will assess both factual knowledge and problem solving.

 
On successful completion you will be able to:
  • Identify the operational characteristics of different transmission lines for electrical power networks.
  • Calculate the steady state and dynamic stability of power systems with the application of network matrix and power flow analysis.
  • Analyse the stability of power systems with symmetrical and unsymmetrical faults.
  • Demonstrate knowlege and understanding of power system protection principles, transmission and distribution systems, insulators and substations.

Practical

Assessment Type 1: Practice-based task
Indicative Time on Task 2: 12 hours
Due: Weeks 2-7
Weighting: 20%

 

Laboratory sessions and submission of lab reprot by the end of each session. Students will be assessed based on thier attendance, participation, performance, and their ability to perform analysis, modeling and implementation of the practical experiment as well as software tools . There is no laboratory session in week 1. Students need to record all the laboratory results (and printouts) and submit a report for each experiment.

Students need to attend 5 out of 6 lab sessions in order to pass the unit.

 
On successful completion you will be able to:
  • Identify the operational characteristics of different transmission lines for electrical power networks.
  • Calculate the steady state and dynamic stability of power systems with the application of network matrix and power flow analysis.
  • Analyse the stability of power systems with symmetrical and unsymmetrical faults.
  • Demonstrate knowlege and understanding of power system protection principles, transmission and distribution systems, insulators and substations.

Project

Assessment Type 1: Project
Indicative Time on Task 2: 20 hours
Due: Weeks 13 & 14
Weighting: 50%

 

This is the major assessment of this Unit. It will consist of 3 individual assessments and 1 team assessment, as follows:

  • Individual assessments:
    • Oral presentation and demonstration of the project;
    • Peer assessment regarding the actual contribution of each team member;
    • Evaluation of project logbook of each team member.
  • Team assessment:
    • Project report to be submitted in iLearn by each team.

 
On successful completion you will be able to:
  • Identify the operational characteristics of different transmission lines for electrical power networks.
  • Calculate the steady state and dynamic stability of power systems with the application of network matrix and power flow analysis.
  • Analyse the stability of power systems with symmetrical and unsymmetrical faults.
  • Demonstrate knowlege and understanding of power system protection principles, transmission and distribution systems, insulators and substations.
  • Work effectively in teams by: identifying individual roles and responsibilities, sharing knowledge through peer-led learning, writing technical reports and logbooks, and effective communications.

1 If you need help with your assignment, please contact:

  • the academic teaching staff in your unit for guidance in understanding or completing this type of assessment
  • the Writing Centre for academic skills support.

2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation

Delivery and Resources

UNIT WEBSITE

  • The iLearn website for this unit can be found at: https://ilearn.mq.edu.au/login/.
    • Note! All information and communications relevant to this Unit will be via the iLearn website.

TEXTBOOK

  • Power System Analysis and Design, Sixth Edition, by J. Duncan Glover, M. S. Sarma and T. J. Overbye (Digital or Print), (Digital version recommended).
  • Electric Power Transmission and Distribution, 1st edition, by Sivanagaraju, S; Satyanarayana, S (Digital or Print), (Digital version recommended) 
    • Note! Links will be provided to specific sections of the Digital version in iLearn for each Lectorial.
    • Remark: All students are expected to have access to this textbook.
    • Support Website: https://au.cengage.com/, https://learning.oreilly.com/

LECTORIALS

  • Lectorials take place twice a week (Weeks 1-7) according to the Unit schedule.
    • Note! Students are strongly encouraged to participate in at least one of the two weekly Lectorials.
  • Lectorials are a combination of traditional lecture and tutorial teaching modes and are designed to improve student engagement.
  • The Lectorials are organised in a flipped classroom fashion.
  • Prior to Lectorials
    • links to E-Text specific sections, brief videos and/or lecture notes are posted in iLearn each week.
    • students are expected to read these E-Text sections, try to solve any given examples, and watch any videos and/or read any posted notes prior to attending the Lectorials.
    • 'pre-class' mini quizzes to assess the basic understanding of fundamental principles in power system analysis and design.
  • During Lectorials
    • brief discussion sessions on fundamental principles.
    • plenty of practical examples.
    • interactive problem solving involving students.

LABORATORIES

  • Practical activities start from Week 2 and take place once a week (Weeks 2-7) according to the Unit schedule.
    • Note! Students must enrol in one of the available weekly Lab sessions.
  • Interactive Practicals use FESTO equipment, PowerWorld Simulator software platform and DigSilent Power Factory software platform to assist with the Lab experiments.

On-campus activities commence in Week 2. Students should contact the Unit convenor as soon as possible if they are unable to get back to campus in time.

PROJECTS

  • Project activities take place once a week (Weeks 8-13) according to the Unit schedule.
    • Note! Teams must enrol in one of the available weekly Project sessions.
  • The team Project is the core component of this Unit. The Projects cover practical aspects of power system networks.
  • Students are required to form teams and work on the given project topic.
    • Note! When forming teams, students should agree in which weekly Project session they want to enrol.
    • All Project activities are performed in teams;

TECHNOLOGY

COMMUNICATIONS

  • Students are reminded the University will communicate all official notices by email to official MQ student's account. Students should read their @student.mq.edu.au email regularly or forward it to an account they check regularly.
  • All announcements and other communications regarding this Unit will be via iLearn platform.

WEB RESOURCES

Unit Schedule

For details, please refer to the Unit Schedule on the ELCT4004 iLearn webpage.

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct

Results

Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au

Academic Integrity

At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

The Writing Centre

The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.

The Library provides online and face to face support to help you find and use relevant information resources. 

Student Services and Support

Macquarie University offers a range of Student Support Services including:

Student Enquiries

Got a question? Ask us via AskMQ, or contact Service Connect.

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/. 

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.

Engineers Australia Competency Mapping

EA Competency Standard   Unit Learning Outcomes
Knowledge and Skill Base 1.1 Comprehensive, theory-based understanding of the underpinning fundamentals applicable to the engineering discipline. ULO1, ULO2, ULO3, ULO4, ULO5
 

1.2 Conceptual understanding of underpinning maths, analysis, statistics, computing.

 ULO1, ULO2, ULO3, ULO4, ULO5
 

1.3 In-depth understanding of specialist bodies of knowledge

 ULO1, ULO2, ULO3, ULO4, ULO5
 

1.4 Discernment of knowledge development and research directions

 ULO1, ULO4, ULO5
 

1.5 Knowledge of engineering design practice

 ULO2, ULO3, ULO4, ULO5
 

1.6 Understanding of scope, principles, norms, accountabilities of sustainable engineering practice.

 ULO1, ULO2, ULO3, ULO4
Engineering Application Ability

2.1 Application of established engineering methods to complex problem solving

 ULO2, ULO3, ULO4, ULO5
 

2.2 Fluent application of engineering techniques, tools and resources.

 ULO1, ULO3, ULO4, ULO5
 

2.3 Application of systematic engineering synthesis and design processes.

 ULO1, ULO2, ULO5
 

2.4 Application of systematic approaches to the conduct and management of engineering projects.

 ULO5
Professional and Personal Attributes

3.1 Ethical conduct and professional accountability.

 ULO5
 

3.2 Effective oral and written communication in professional and lay domains.

 ULO5
 

3.3 Creative, innovative and pro-active demeanour.

 ULO1, ULO2, ULO3, ULO4, ULO5
 

3.4 Professional use and management of information.

 ULO1
 

3.5 Orderly management of self, and professional conduct.

 ULO5
 

3.6 Effective team membership and team leadership

 ULO5

 

 

Unit information based on version 2023.02 of the Handbook