Unit convenor and teaching staff |
Unit convenor and teaching staff
Lecturer
Subhas Mukhopadhyay
Contact via email
44WR 134
Monday 9:0AM to 11:00AM
Teaching staff
Alice James
Contact via email
50WR
Teaching staff
Avishkar Seth
Contact via email
50WR
|
---|---|
Credit points |
Credit points
10
|
Prerequisites |
Prerequisites
(MTRN3026 or ELEC326) and (ELEC3024 or ELEC324)
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
With the advancement of Internet of Things (IoT), microelectromechanical systems (MEMS), smart sensors and actuators, wireless mechatronic devices, services, and systems are experiencing fast growth in a variety of application fields, such as manufacturing, transportation, and healthcare. This unit deals on the theory and practice of designing wireless mechatronic systems using smart actuators, sensors, Interfacing, embedded controller, wireless protocols with adaptive intelligence.
|
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
Grading and passing requirement for unit
In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD), and meet two hurdle requirments (below).
Supplementary Exam: If you receive special consideration for the final exam, a supplementary exam will be scheduled by the faculty during a supplementary exam period. This is typically 3 to 4 weeks after the normal exam period. By making a special consideration application for the final exam you are declaring yourself available for a resit during the supplementary examination period and will not be eligible for a second special consideration approval based on pre-existing commitments. Please ensure you are familiar with the policy prior to submitting an application. Approved applicants will receive an individual notification one week prior to the exam with the exact date and time of their supplementary examination.
Late submissions and Resubmissions
Online quizzes, in-class activities, or scheduled tests and exam must be undertaken at the time indicated in the unit guide. All other assessments must be submitted by 5:00 pm on their due date. Should either of these assessments be missed due to illness or misadventure, students should apply for Special Consideration.
Assessments not submitted by the due date will receive a mark in accordance with the late submission policy as follows: A 12-hour grace period will be given after which the following deductions will be applied to the awarded assessment mark: 12 to 24 hours late = 10% deduction; for each day thereafter, an additional 10% per day or part thereof will be applied until five days beyond the due date. After this time, a mark of zero (0) will be given. For example, an assessment worth 20% is due 5 pm on 1 January. Student A submits the assessment at 1 pm, 3 January. The assessment received a mark of 15/20. A 20% deduction is then applied to the mark of 15, resulting in the loss of three (3) marks. Student A is then awarded a final mark of 12/20.
Resubmissions of work are not allowed.
Special Consideration
The Special Consideration Policy aims to support students who have been impacted by short-term circumstances or events that are serious, unavoidable and significantly disruptive, and which may affect their performance in assessment. If you experience circumstances or events that affect your ability to complete the assessments in this unit on time, please inform the convenor and submit a Special Consideration request through ask.mq.edu.au.
Name | Weighting | Hurdle | Due |
---|---|---|---|
Practical Project Log Book | 10% | No | WEEK 13 |
Report #1 | 10% | No | WEEK 3 |
Practical Project Demonstration | 20% | No | WEEK 13 |
Report #3 | 10% | No | WEEK 13 |
Report #2 | 10% | No | WEEK 8 |
Final Exam | 30% | Yes | TBA |
Test#1 | 10% | No | WEEK 4 |
Assessment Type 1: Log book
Indicative Time on Task 2: 6 hours
Due: WEEK 13
Weighting: 10%
Students must keep a log book while working on their practical project. Log books will be submitted for grading in week 13.
Assessment Type 1: Report
Indicative Time on Task 2: 10 hours
Due: WEEK 3
Weighting: 10%
This is the first report on a session-long practical project. This will be due on Week#3.
Assessment Type 1: Demonstration
Indicative Time on Task 2: 20 hours
Due: WEEK 13
Weighting: 20%
Practical projects will be assessed in week 13
Assessment Type 1: Report
Indicative Time on Task 2: 10 hours
Due: WEEK 13
Weighting: 10%
This is the final report on the session-long practical project. It will be due in week 13.
Assessment Type 1: Report
Indicative Time on Task 2: 10 hours
Due: WEEK 8
Weighting: 10%
This is the second report on the session-long practical project. It will be due in week 8.
Assessment Type 1: Examination
Indicative Time on Task 2: 10 hours
Due: TBA
Weighting: 30%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
This exam will test all topics covered in the unit
Assessment Type 1: Quiz/Test
Indicative Time on Task 2: 6 hours
Due: WEEK 4
Weighting: 10%
The first Test will be held on Week#4
1 If you need help with your assignment, please contact:
2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation
The teaching and pracs related materials will be available in iLearn
Please refer to iLearn
Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.
The Library provides online and face to face support to help you find and use relevant information resources.
Macquarie University offers a range of Student Support Services including:
Got a question? Ask us via AskMQ, or contact Service Connect.
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
The project activites will be slighlt different compared to last year. the details will be announced during the first week.
EA Competency Standard |
Unit Learning Outcomes |
|
Knowledge and Skill Base |
1.1 Comprehensive, theory-based understanding of the underpinning fundamentals applicable to the engineering discipline. |
1.2 |
1.2 Conceptual understanding of underpinning maths, analysis, statistics, computing. |
|
|
1.3 In-depth understanding of specialist bodies of knowledge |
1,2,3,4 |
|
1.4 Discernment of knowledge development and research directions |
2 |
|
1.5 Knowledge of engineering design practice |
4 |
|
1.6 Understanding of scope, principles, norms, accountabilities of sustainable engineering practice. |
|
|
Engineering Application Ability |
2.1 Application of established engineering methods to complex problem solving |
2,3 |
2.2 Fluent application of engineering techniques, tools and resources. |
2,3,4 |
|
2.3 Application of systematic engineering synthesis and design processes. |
|
|
2.4 Application of systematic approaches to the conduct and management of engineering projects. |
|
|
Professional and Personal Attributes |
3.1 Ethical conduct and professional accountability. |
4 |
3.2 Effective oral and written communication in professional and lay domains. |
1,2 |
|
3.3 Creative, innovative and pro-active demeanour. |
|
|
3.4 Professional use and management of information. |
|
|
3.5 Orderly management of self, and professional conduct. |
4 |
|
3.6 Effective team membership and team leadership |
|
Date | Description |
---|---|
25/09/2023 | Tutor changed to teaching staff |
Unit information based on version 2023.02 of the Handbook