Students

MTRN4062 – Micro Electro Mechanical Systems (MEMS)

2023 – Session 2, In person-scheduled-weekday, North Ryde

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff Unit Convenor and Lecturer
David Inglis
david.inglis@mq.edu.au
Contact via email or office phone (02 9850 9150)
3MD-160
Tuesdays 4-5pm, Thursdays 8-9am (no appointment needed)
Credit points Credit points
10
Prerequisites Prerequisites
MTRN3026
Corequisites Corequisites
Co-badged status Co-badged status
Unit description Unit description

This unit introduces Microelectromechanical Systems (MEMS) and their application in a wide range of systems including sensors, actuators, biology and microfluidics. MEMS has been identified as one of the most promising technologies and has found vast applications in all aspects of our daily life. Industrial, healthcare, automobile and aerospace designs are increasingly deploying MEMS devices by combining microelectronics with micromachining technology for highly precise control, automation, and positioning applications.

The unit includes hands-on experience in the field of MEMS and aims to familiarise students with the steps of the microfabrication process. Students will spend time within the School of Engineering clean room to perform foundational microfabrication processes. They will learn about the physics and underlying principles behind MEMS devices and will develop understanding of the diversity and significance of the field.

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • ULO1: Describe the working principles of a range of MEMS devices including sensors, actuators, gyroscopes and microfluidics.
  • ULO2: Execute a successful analysis of a MEMS problem and provide insights into the practical applications of the methods.
  • ULO3: Perform a simple modelling or computational model for a MEMS problem with sufficient complexity
  • ULO4: Design and fabricate a MEMS system or component by utilising appropriate facilities and applying the theory learned.

General Assessment Information

Grading and passing requirement for unit

In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).

Supplementary Exam: If you receive special consideration for the final exam, a supplementary exam will be scheduled by the faculty during a supplementary exam period. This is typically 3 to 4 weeks after the normal exam period. By making a special consideration application for the final exam you are declaring yourself available for a resit during the supplementary examination period and will not be eligible for a second special consideration approval based on pre-existing commitments. Please ensure you are familiar with the policy prior to submitting an application. Approved applicants will receive an individual notification one week prior to the exam with the exact date and time of their supplementary examination.

Late submissions and Resubmissions

Online quizzes, in-class activities, or scheduled tests and exam must be undertaken at the time indicated in the unit guide.  All other assessments must be submitted by 5:00 pm on their due date. Should either of these assessments be missed due to illness or misadventure, students should apply for Special Consideration.

Assessments not submitted by the due date will receive a mark in accordance with the late submission policy as follows:  A 12-hour grace period will be given after which the following deductions will be applied to the awarded assessment mark: 12 to 24 hours late = 10% deduction; for each day thereafter, an additional 10% per day or part thereof will be applied until five days beyond the due date. After this time, a mark of zero (0) will be given. For example, an assessment worth 20% is due 5 pm on 1 January. Student A submits the assessment at 1 pm, 3 January. The assessment received a mark of 15/20. A 20% deduction is then applied to the mark of 15, resulting in the loss of three (3) marks. Student A is then awarded a final mark of 12/20.

Resubmissions of work are not allowed.

Special Consideration

The Special Consideration Policy aims to support students who have been impacted by short-term circumstances or events that are serious, unavoidable and significantly disruptive, and which may affect their performance in assessment. If you experience circumstances or events that affect your ability to complete the assessments in this unit on time, please inform the convenor and submit a Special Consideration request through ask.mq.edu.au.

Assessment Tasks

Name Weighting Hurdle Due
Literature Review Presentation 14% No Weeks 12 and 13
Final Exam 28% No Exam Period
Behaviour, participation, and knowledge demonstrated during reearch lab visits 12% No During Practical Classes
Mid-Session Exam 24% No Week 7
Online quizzes to prepare for lab visits 10% No During SGTA
Assignments 12% No Week 11 and Week 5

Literature Review Presentation

Assessment Type 1: Presentation
Indicative Time on Task 2: 23 hours
Due: Weeks 12 and 13
Weighting: 14%

 

Students will engage with relevant literature and prepare for a presentation, oral defence, or debate.

 
On successful completion you will be able to:
  • Describe the working principles of a range of MEMS devices including sensors, actuators, gyroscopes and microfluidics.
  • Execute a successful analysis of a MEMS problem and provide insights into the practical applications of the methods.

Final Exam

Assessment Type 1: Examination
Indicative Time on Task 2: 22 hours
Due: Exam Period
Weighting: 28%

 

The final exam will cover content from after the mid-session break until the end of session.

 
On successful completion you will be able to:
  • Describe the working principles of a range of MEMS devices including sensors, actuators, gyroscopes and microfluidics.
  • Execute a successful analysis of a MEMS problem and provide insights into the practical applications of the methods.
  • Perform a simple modelling or computational model for a MEMS problem with sufficient complexity

Behaviour, participation, and knowledge demonstrated during reearch lab visits

Assessment Type 1: Practice-based task
Indicative Time on Task 2: 0 hours
Due: During Practical Classes
Weighting: 12%

 

Students' behaviour and knowledge during visits to reserach laboratories will be assessed by teaching staff. This may inlcude replicating a task after having it demonstrated, answering questions about the equipment and facilites, and baviour in a professional manner.

 
On successful completion you will be able to:
  • Describe the working principles of a range of MEMS devices including sensors, actuators, gyroscopes and microfluidics.
  • Design and fabricate a MEMS system or component by utilising appropriate facilities and applying the theory learned.

Mid-Session Exam

Assessment Type 1: Examination
Indicative Time on Task 2: 18 hours
Due: Week 7
Weighting: 24%

 

The mid-Session Exam will cover lecture and problem-set content up to the mid-session break

 
On successful completion you will be able to:
  • Describe the working principles of a range of MEMS devices including sensors, actuators, gyroscopes and microfluidics.
  • Execute a successful analysis of a MEMS problem and provide insights into the practical applications of the methods.
  • Perform a simple modelling or computational model for a MEMS problem with sufficient complexity

Online quizzes to prepare for lab visits

Assessment Type 1: Quiz/Test
Indicative Time on Task 2: 8 hours
Due: During SGTA
Weighting: 10%

 

Prior to laboratory visits, students must complete training and induction modules. These will include online quizzes. In addition to a grade, students may be required to acheive a mastery threshold before being admitted to the laboratory.

 
On successful completion you will be able to:
  • Describe the working principles of a range of MEMS devices including sensors, actuators, gyroscopes and microfluidics.
  • Design and fabricate a MEMS system or component by utilising appropriate facilities and applying the theory learned.

Assignments

Assessment Type 1: Problem set
Indicative Time on Task 2: 50 hours
Due: Week 11 and Week 5
Weighting: 12%

 

Assignments will be used to assess MEMS component modelling, and knowledge of lecture content. They will also provide practice for examinations.

 
On successful completion you will be able to:
  • Describe the working principles of a range of MEMS devices including sensors, actuators, gyroscopes and microfluidics.
  • Execute a successful analysis of a MEMS problem and provide insights into the practical applications of the methods.
  • Perform a simple modelling or computational model for a MEMS problem with sufficient complexity
  • Design and fabricate a MEMS system or component by utilising appropriate facilities and applying the theory learned.

1 If you need help with your assignment, please contact:

  • the academic teaching staff in your unit for guidance in understanding or completing this type of assessment
  • the Writing Centre for academic skills support.

2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation

Delivery and Resources

Students are encourage to obtain a copy of "Foundations of MEMS" by Chang Liu. Any edition will be suitable.

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct

Results

Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au

Academic Integrity

At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

The Writing Centre

The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.

The Library provides online and face to face support to help you find and use relevant information resources. 

Student Services and Support

Macquarie University offers a range of Student Support Services including:

Student Enquiries

Got a question? Ask us via AskMQ, or contact Service Connect.

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/. 

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.

Changes from Previous Offering

This is a new unit!

Engineers Australia Competency Mapping

EA Competency Standard

Unit Learning Outcomes

Knowledge and Skill Base

1.1 Comprehensive, theory-based understanding of the underpinning fundamentals applicable to the engineering discipline.

1.2

1.2 Conceptual understanding of underpinning maths, analysis, statistics, computing.

 

1.3 In-depth understanding of specialist bodies of knowledge

1,2,3,4

1.4 Discernment of knowledge development and research directions

2

1.5 Knowledge of engineering design practice

4

1.6 Understanding of scope, principles, norms, accountabilities of sustainable engineering practice.

 

Engineering Application Ability

2.1 Application of established engineering methods to complex problem solving

2,3

2.2 Fluent application of engineering techniques, tools and resources.

2,3,4

2.3 Application of systematic engineering synthesis and design processes.

 

2.4 Application of systematic approaches to the conduct and management of engineering projects.

 

Professional and Personal Attributes

3.1 Ethical conduct and professional accountability.

4

3.2 Effective oral and written communication in professional and lay domains.

1,2

3.3 Creative, innovative and pro-active demeanour.

 

3.4 Professional use and management of information.

 

3.5 Orderly management of self, and professional conduct.

4

3.6 Effective team membership and team leadership

 

Unit information based on version 2023.03 of the Handbook