Unit convenor and teaching staff |
Unit convenor and teaching staff
Unit convenor, Lecturer, Tutor
Aron Downie
Contact via By appointment
Lecturer, Tutor
Christopher Agius
Contact via By appointment
Lecturer
Christopher Burrell
Contact via By Appointment
|
---|---|
Credit points |
Credit points
10
|
Prerequisites |
Prerequisites
Admission to BChiroSc and (CHIR2103 or CHIR213) and (CHIR2104 or CHIR214)
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
This unit is an introduction to chiropractic spinal technique and extends palpation from the technique units at 1000 and 2000 level. It further develops psychomotor skill acquisition from previous units. Students gain proficiency in a core group of spinal and peripheral joint manipulative techniques. The hypotheses and scientific rationale relating to chiropractic intervention is explored. Biomechanical function of the spine is explored in detail. Major themes relating to evidence-based practice (EBP) are explored. |
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
Grade descriptors and other information concerning grading are contained in the Macquarie University Assessment Policy.
All final grades are determined by a grading committee, in accordance with the Macquarie University Assessment Policy, and are not the sole responsibility of the Unit Convenor.
Students will be awarded a final grade and a mark which must correspond to the grade descriptors specified in the Assessment Procedure (clause 127-8).
To pass this unit, you must demonstrate sufficient evidence of achievement of the learning outcomes, meet any ungraded requirements, and achieve a final mark of 50 or better.
Further details for each assessment task will be available on iLearn.
Unless a Special Consideration request has been submitted and approved, a 5% penalty (OF THE TOTAL POSSIBLE MARK) will be applied each day a written assessment is not submitted, up until the 7th day (including weekends). After the 7th day, a grade of ‘0’ will be awarded even if the assessment is submitted. Submission time for all written assessments is set at 11.55pm. A 1-hour grace period is provided to students who experience a technical concern.
For example:
Number of days (hours) late |
Total Possible Marks |
Deduction |
Raw mark |
Final mark |
1 day (1-24 hours) |
100 |
5 |
75 |
70 |
2 days (24-48 hours) |
100 |
10 |
75 |
65 |
3 days (48-72 hours) |
100 |
15 |
75 |
60 |
7 days (144-168 hours) |
100 |
35 |
75 |
40 |
>7 days (>168 hours) |
100 |
- |
75 |
0 |
For any late submissions of time-sensitive tasks, such as scheduled tests/exams, performance assessments/presentations, and/or scheduled practical assessments/labs, students need to submit an application for Special Consideration.
Name | Weighting | Hurdle | Due |
---|---|---|---|
Spot Tests | 10% | No | W5, W10 |
iLearn Quizes | 10% | No | W6, W11 |
Biomechanics written report | 10% | No | W11 |
Objective Structured Clinical Exam (OSCE) | 35% | Yes | W13 |
End of semester written examination | 35% | No | Exam period |
Assessment Type 1: Clinical performance evaluation
Indicative Time on Task 2: 4 hours
Due: W5, W10
Weighting: 10%
Students will undertake two chiropractic spot tests to be scheduled throughout the semester. Each spot test is weighted 5%. Immediately after each spot test (i.e. during the same class), students will be given individual verbal feedback on their performance. The format of the spot test will assist students to prepare for the end of semester OSCE.
Assessment Type 1: Quiz/Test
Indicative Time on Task 2: 4 hours
Due: W6, W11
Weighting: 10%
Two online quizzes covering material from teaching weeks 1-5, and 6-10. Each quiz is weighted 5%.
Assessment Type 1: Report
Indicative Time on Task 2: 10 hours
Due: W11
Weighting: 10%
Written report task which asks students to explain biomechanical concepts as they relate to manipulative procedures.
Assessment Type 1: Clinical performance evaluation
Indicative Time on Task 2: 10 hours
Due: W13
Weighting: 35%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
During the Objective Structural Clinical Exam (OSCE) students will perform a practical exam over a number of stations. The OSCE allows students to demonstrate their acquisition of competency across the various clinical assessment and treatment procedures covered in this unit. The OSCE will be conducted during the end of semester practical examination period.
Assessment Type 1: Examination
Indicative Time on Task 2: 10 hours
Due: Exam period
Weighting: 35%
The end of semester written exam is a closed book examination of all the material covered in the unit.
1 If you need help with your assignment, please contact:
2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation
Delivery mode. As a student enrolled in this unit, you will engage in a range of online and face-to-face learning activities, including hands-on practicals, face to face lectures, online modules and videos. Details can be found on the iLearn site for this unit. Nb. LECTURES BEGIN WEEK 1. TUTORIALS BEGIN WEEK 2
1 x 2 hour lecture per week (FACE-TO-FACE) - begins in Week 1
2 x 2 hour tutorial/practicals per week (ON-CAMPUS ATTENDANCE) - begins in Week 2
2-3 hours per week self- instructional learning
Prescribed Unit Materials
Esposito & Philipson, Manual of Spinal Technique - Printed EXCERPT will available for purchase within tutorial class
Recommended reading
Specific week-week resources available as links via iLearn and Leganto
Oatis. Kinesiology “Kinesiology The Mechanics and Pathomechanics of Human Movement,” 3rd edition. ISBN: 9781451191561
Manual of Peripheral Technique, Department of Chiropractic, Macquarie University - online adjustment compilation available via iLearn download
Bergmann & Peterson: Chiropractic technique, principles and procedures 3rd Ed. ISBN : 9780323049696
Specific week-week resources available as links via iLearn and Leganto
Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit connect.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.
The Library provides online and face to face support to help you find and use relevant information resources.
Macquarie University offers a range of Student Support Services including:
Got a question? Ask us via the Service Connect Portal, or contact Service Connect.
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
Social inclusion at Macquarie University is about giving everyone who has the potential to benefit from higher education the opportunity to study at university, participate in campus life and flourish in their chosen field. The University has made significant moves to promote an equitable, diverse and exciting campus community for the benefit of staff and students. It is your responsibility to contribute towards the development of an inclusive culture and practice in the areas of learning and teaching, research, and service orientation and delivery. As a member of the Macquarie University community, you must not discriminate against or harass others based on their sex, gender, race, marital status, carers' responsibilities, disability, sexual orientation, age, political conviction or religious belief. All staff and students are expected to display appropriate behaviour that is conducive to a healthy learning environment for everyone.
In the Faculty of Medicine, Health and Human Sciences, professionalism is a key capability embedded in all our courses.
As part of developing professionalism, students are expected to attend all small group interactive sessions including clinical, practical, laboratory, work-integrated learning (e.g., PACE placements), and team-based learning activities. Some learning activities are recorded (e.g., face-to-face lectures), however you are encouraged to avoid relying upon such material as they do not recreate the whole learning experience and technical issues can and do occur. As an adult learner, we respect your decision to choose how you engage with your learning, but we would remind you that the learning opportunities we create for you have been done so to enable your success, and that by not engaging you may impact your ability to successfully complete this unit. We equally expect that you show respect for the academic staff who have worked hard to develop meaningful activities and prioritise your learning by communicating with them in advance if you are unable to attend a small group interactive session.
Another dimension of professionalism is having respect for your peers. It is the right of every student to learn in an environment that is free of disruption and distraction. Please arrive to all learning activities on time, and if you are unavoidably detained, please join activity as quietly as possible to minimise disruption. Phones and other electronic devices that produce noise and other distractions must be turned off prior to entering class. Where your own device (e.g., laptop) is being used for class-related activities, you are asked to close down all other applications to avoid distraction to you and others. Please treat your fellow students with the utmost respect. If you are uncomfortable participating in any specific activity, please let the relevant academic know.
Unit information based on version 2024.01R of the Handbook