Students

CIVL3201 – Transport Engineering

2024 – Session 1, In person-scheduled-weekday, North Ryde

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff Lecturer
Golnaz Alipour Esgandani
golnaz.alipour@mq.edu.au
Contact via via email
Room 111, Level 1, 50 Waterloo Road, Macquarie Park
By arrangement
Credit points Credit points
10
Prerequisites Prerequisites
130cp at 1000 level or above and (CIVL1001 or MECH1001)
Corequisites Corequisites
Co-badged status Co-badged status
Unit description Unit description

This unit provides students with an introduction to transportation and road engineering. It aims to develop skills that are fundamental for civil engineers undertaking typical traffic and transport investigations, and design of transport systems and roads. The first part of the unit focuses on transport planning, economics of transport, and traffic engineering. The second part of the unit is about road engineering including road design standards, geometric design of roads, and maintenance strategies. This unit prepares students to develop fundamental knowledge required for Geotechnical and Transportation Project unit.

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • ULO1: Demonstrate a fundamental knowledge of transportation systems and traffic flow theories
  • ULO2: Design a transportation system including intersections and signals using traffic flow concepts
  • ULO3: Demonstrate a good understanding of road and pavement design, road safety and maintenance strategies, and environmental issues associated with roads
  • ULO4: Apply road design standards in the design and construction of roads and identify factors affecting system operations

General Assessment Information

Problem set assessment includes all the activities such as solving tutorial questions, laboratory work and lab report preparation, group projects that students participate in during the practical classes. More detail about the problem set assessment will be shared with students via iLearn.

Grading and passing requirement for unit

There are weekly problem sets, the mid session test and a final exam that need to be completed for assessment. In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD). 

For further details about grading, please refer below in the policies and procedures section.

Late submissions and Resubmissions

Online quizzes, in-class activities, or scheduled tests and exam must be undertaken at the time indicated in the unit guide. Should these activities be missed due to illness or misadventure, students may apply for Special Consideration.

All other assessments must be submitted by 5:00 pm (Sydney Time) on their due date.

Should these assessments be missed due to illness or misadventure, students should apply for Special Consideration.

Assessments not submitted by the due date will receive a mark of zero.

Resubmission of work is not permitted

Assessment Tasks

Name Weighting Hurdle Due
Problem sets 40% No Each week
Mid session test 20% No Week 7
Invigilated Final Examination 40% No TBA

Problem sets

Assessment Type 1: Problem set
Indicative Time on Task 2: 26 hours
Due: Each week
Weighting: 40%

 

Weekly assignment

 
On successful completion you will be able to:
  • Demonstrate a fundamental knowledge of transportation systems and traffic flow theories
  • Design a transportation system including intersections and signals using traffic flow concepts
  • Demonstrate a good understanding of road and pavement design, road safety and maintenance strategies, and environmental issues associated with roads
  • Apply road design standards in the design and construction of roads and identify factors affecting system operations

Mid session test

Assessment Type 1: Quiz/Test
Indicative Time on Task 2: 12 hours
Due: Week 7
Weighting: 20%

 

Mid session test

 
On successful completion you will be able to:
  • Demonstrate a fundamental knowledge of transportation systems and traffic flow theories
  • Design a transportation system including intersections and signals using traffic flow concepts

Invigilated Final Examination

Assessment Type 1: Examination
Indicative Time on Task 2: 20 hours
Due: TBA
Weighting: 40%

 

Invigilated Final Examination

 
On successful completion you will be able to:
  • Demonstrate a fundamental knowledge of transportation systems and traffic flow theories
  • Design a transportation system including intersections and signals using traffic flow concepts
  • Demonstrate a good understanding of road and pavement design, road safety and maintenance strategies, and environmental issues associated with roads
  • Apply road design standards in the design and construction of roads and identify factors affecting system operations

1 If you need help with your assignment, please contact:

  • the academic teaching staff in your unit for guidance in understanding or completing this type of assessment
  • the Writing Centre for academic skills support.

2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation

Delivery and Resources

Lecture and practical sessions start in Week 1.

All in-person students need to be on campus in week 1. If you are an in-person student and are unable to be on campus for the start of week 1 please contact the unit convenor urgently.

As practicals are face to face, students who are not able to be on campus in week 1 should contact unit convenor urgently.

Unit Schedule

Refer to iLearn and lecture notes for the unit schedule.

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct

Results

Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit connect.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au

Academic Integrity

At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

The Writing Centre

The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.

The Library provides online and face to face support to help you find and use relevant information resources. 

Student Services and Support

Macquarie University offers a range of Student Support Services including:

Student Enquiries

Got a question? Ask us via the Service Connect Portal, or contact Service Connect.

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/. 

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.

Unit information based on version 2024.02 of the Handbook