Overall you are expected to spend 150 hours studying and reviewing teaching materials, and submitting assessments for this subject throughout the whole semester. The 'estimated time on task' for each assessment item is an estimate of the additional time needed to complete each assessment outside of all scheduled learning activities. These estimates assume that you actively engage with all scheduled learning activities, and for this we recommend that each week you spend at least 1.5 hours consolidating the lecture content, practicing worked examples from lectures, and answering the "concept questions". The importance of attending lectures in person, and actively working through the modules (electric circuits part)is critical to your success in this unit.

WEEKLY LEARNING LOG (10%)

The purpose of this assessment task is to encourage your consistent engagement with the unit throughout the semester. You are required to maintain a well-organised physical or electronic notebook in which you write notes, answer concept questions, complete tutorial questions during or after STGA, and generally demonstrate your engagement with the unit. This will be assessed each week during the SGTA session, so make sure you have your notebook with you. More details will follow on iLearn.

This task is a hurdle requirement. You will need to present your notebook at the beginning of SGTA classes and earn at least 7 marks out of a possible 10 in order to pass the hurdle. You can earn up to 1 mark every week, but your maximum mark for this assessment item will be capped at 10. Further details will be provided on iLearn.

We require effective participation in SGTA sessions, entailing a focused work effort and attendance for the full session. If you do not participate effectively in a given week, for example leaving the tutorial early without extenuating circumstances, it will be grounds for receiving a score of zero for that week's Weekly Learning Log.

ASSIGNMENTS/PROBLEM SETS (25%, estimated time on task = 20 hours)

Students will complete two "Foundation Skills" assignments, each worth 2.5 marks, and four "Mastery" assignments, each worth 5%. The"Foundation Skills" assignments are online quizzes that must be completed by the end of weeks 3 and 9 respectively.  Multiple attempts are permitted over a period of 2 weeks, and if you receive a "satisfactory" mark of 80% or higher you will be awarded 2.5 marks. No marks will be awarded for marks below 80%. The first quiz concerns basic concepts that were taught in phys1510 coupled with essential maths, both of which are required to succeed in the unit. The second quiz tests the essential knowledge required to succeed in the electric circuits part of the unit.

The Mastery assignments will be released in weeks 2, 5, 8, and 11, and will be due in weeks 4, 7, 10 and 12. Due dates and details will be given on iLearn. They will contain a variety of activities such as researching technologies that are underpinned by concepts taught in Phys1520, advanced circuit problems, and may contain some exam-style questions. Individual feedback on assignments will be provided to students. Completing the tutorial questions and revising the solutions is good preparation for the assignments.

Assignments are not a hurdle requirement, but they do account for 25% of your marks for the unit. 

FINAL EXAMINATION (40%, estimated time on task = 20 hours)

The final examination is a hurdle requirement. It will cover all the content from the unit. It will be a closed-book, on-campus exam, and you must obtain a mark of at least 40% in the final exam to be eligible to pass the unit. If your mark in the final examination is between 30% and 39% inclusive, you may be a given a second and final chance to attain the required level of performance; the mark awarded for the second exam towards your final unit mark will be capped at 40%, and you will be allowed to sit the second exam only if this mark would be sufficient to pass the unit overall. 

If you receive special consideration for the final exam, a supplementary exam will be scheduled after results are released. Please see FSE101 in iLearn for dates. By making a special consideration application for the final exam you are declaring yourself available for a resit during the supplementary examination period and will not be eligible for a second special consideration approval based on pre-existing commitments. Please ensure you are familiar with the policy prior to submitting an application. Approved applicants will receive an individual notification one week prior to the exam with the exact date and time of their supplementary examination. Second chance exams for hurdle assessments will also be scheduled in this period.

LABORATORY WORK (25%, estimated time on task = 10 hours)

Satisfactory completion of laboratories is a hurdle requirement. You must attend all laboratory sessions.  There is a online induction module and safety quiz that needs to be completed in Week 1 and includes work health and safety information. Students will also need to enrol in groups on iLearn so as to know which experiment to prepare for and complete in week 2. It needs to be completed by all students regardless of whether this is their first Physics unit or not. You can’t do subsequent lab sessions if you don’t complete the introduction. The next nine lab sessions involve experimental work and will be assessed. You must obtain a mark of at least 40% for each of the laboratory sessions in order to pass the unit.

Preparation is required for each of the lab sessions 2-9. You will find the Prelab activities in the Laboratory Resources section of iLearn. Your prelab work will account for some of the marks for each laboratory session.

If you miss a session or fail to achieve at least 40% for any lab session, you must complete a “Request to schedule a Catch-up laboratory session” form, which can be found on iLearn. See ilearn for full details about catch up classes and when they are scheduled. No more than 3 catch ups are allowed for missed labs/lab hurdles, except where Special Consideration has been approved. If you fail to attend the catch-up class you are booked into, then that will count as another missed lab.

Late Assessment Submission Penalty 

From 1 July 2022, Students enrolled in Session based units with written assessments will have the following university standard late penalty applied. Please see https://students.mq.edu.au/study/assessment-exams/assessments for more information. 

Unless a Special Consideration request has been submitted and approved, a 5% penalty (of the total possible mark) will be applied each day a written assessment is not submitted, up until the 7^th day (including weekends). After the 7^th day, a grade of '0' will be awarded even if the assessment is submitted. Submission time for all written assessments is set at 11:55 pm. A 1-hour grace period is provided to students who experience a technical concern. 

For any late submission of time-sensitive tasks, such as scheduled tests/exams, performance assessments/presentations, and/or scheduled practical assessments/labs, students need to submit an application for Special Consideration.  

Assessments where Late Submissions will be accepted 

In this unit, late submissions will accepted as follows: 

• Mastery Assignments – YES, Standard Late Penalty applies 
• All other assessments - NO, unless Special Consideration is Granted

General Information Important instructions and study materials are hosted on the iLearn webpage for the unit as are all announcements. You will find it at  http://ilearn.mq.edu.au Please refer to it frequently! 

Asking for help

A number of people can assist students while they undertake PHYS1520. For any inquiry please use this e-mail address: PHYS1520@mq.edu.au instead of using people's personal e-mails. This will ensure that the best answer to your question is obtained.

Unit textbook.  The textbook for most of this unit is "Fundamentals of Physics" by  Halliday. Resnick and Walker,11th edition. It is essential that you arrange access (digital or physical) to this textbook (10th edition is sufficient) as we will be following it closely and you will find it an invaluable resource. This is the same textbook that you used for PHYS1510. Print versions or digital options are available through https://www.wileydirect.com.au/?s=Fundamentals+of+physics.  The Library has an unlimited license to Fundamentals Of Physics Extended 10th Edition. Access the book online from the library by using multisearch, or look for the link on iLearn.

The second textbook that you will find useful for the portion of this unit that delves into Electric Circuits is Introduction to Electric Circuits by Dorf and Svoboda  The text book will also be a useful resource for further Engineering study in Electronics, Electrical, and Mechatronics Engineering. The Library also has a license to this book, or you can purchase the e-text from here:  https://www.wiley.com/en-au/Dorf%27s+Introduction+to+Electric+Circuits%2C+Global+Edition-p-9781119456162

Technology:  Audio recordings and copies of slides from lectures will be available on iLearn. These are intended as backups, and are not a substitute for attending lectures in person.

The use of calculators in the laboratory classes, SGTAs, assignments and in the final examination for this unit is usually necessary. In accordance with the Science & Engineering Faculty's policy, calculators with a full alphabet on the keyboard are not allowed in the final examination. Personal electronic devices such as smartphones, tablets, or laptops will be used for self-assessment quizzes and other learning enhancement classroom activities.

Lectures, SGTA tutorials, and Lab classes

This unit consists of three different formal types of activity, all of which are scheduled for on-campus delivery. There are no online classes. If there are any changes to the delivery, you will be notified via iLearn announcements.

1)  LECTURES

In lectures, new material is presented, discussed and illustrated by examples and demonstrations. Lectures are an important part of studying physics, where the lecturers seek to explain the concepts from several points of view, point out and explain the most important aspects of the material and, very importantly, illustrate the relationships and connections between the different concepts that are studied in PHYS1520 – no subject in physics stands on its own. Problem solving is modelled via worked examples and these scaffold the more complex problems considered in the SGTA.

2) SGTA - TUTORIALS

These classes are where you will consolidate and apply the concepts and methods taught in lectures, to solving problems.  There will be a mix of activities such as demonstrations, informal quizzes and presentations, solving tutorial questions, and past exam questions. SGTAs form an important learning component of PHYS1520.

Attending and participating in SGTA activities is a required part of the unit, and students who do not attend and participate for the full duration of most SGTAs risk failing the unit, The Weekly Learning Log will be marked during SGTAs. Students are expected to prepare for each SGTA by attending or listening to the lectures. It is further recommended to read relevant portions of the textbook.

3) LABORATORY SESSIONS

The laboratory component is an essential component of your studies and so counts for an appreciable fraction of your final assessment. You will be introduced to some of the basic skills and techniques required of practicing physicists, scientists and engineers. You will be issued with a Laboratory Notebook, provided with instructional material in the form of Laboratory Notes which can be found in the Laboratory Resources section of iLearn, and assisted in the laboratory by a team of demonstrators. For each laboratory session you are required to complete some preparatory work (Pre-Lab) before attending your nominated Lab session. To figure out which Prelab to do, please consult the Laboratory Schedule on iLearn.

Location: There are two laboratories used for 1^st year physics they are both in 14 SCO (formerly E7B):

Room 114 (Ground floor at the North-East corner of building)

Room 254 (First floor, north-facing side of the atrium)

Please check iLearn to see where your lab class will take place.

Laboratory Safety: You are required to follow all safety guidelines given in the first Lab session, your lab notes, and the lab staff. Food and drink cannot be consumed in the lab, and students without suitable covered footwear will be refused admission.