Unit convenor and teaching staff |
Unit convenor and teaching staff
Unit Convenor
Hazer Inaltekin
Contact via 9850 2280
44 WTR, Room 133
Tuesday 5pm-6pm
|
---|---|
Credit points |
Credit points
10
|
Prerequisites |
Prerequisites
200cp and (ELEC345 or TELE3350) and (ELEC321 or TELE3021) and (COMP347 or COMP3250)
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
In this unit students will conduct the first half of an individual research thesis on a topic in the Telecommunications Engineering specialisation or stream under the direction of an academic supervisor. The focus of the work will be on developing the project proposal, conducting the literature review and project planning and design. |
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
Grading and Passing Requirement for the Unit
In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).
For further details about grading, please refer below in the policies and procedures section.
Hurdle Requirements
The Preliminary Thesis is a hurdle requirement. A grade of 50% or more on the Preliminary Thesis is a condition of passing this unit. If you are given a second opportunity to submit your thesis as a result of failing to meet the minimum mark required, your submission will be due during the supplementary examination period and will be notified of the exact day and time by the unit convenor. The second attempt at a hurdle assessment is graded as pass fail. The maximum grade for a second attempt is the hurdle threshold grade.
Regular meetings with thesis supervisor is a hurdle requirement. Students are required to attend at least 5 out of 10 weekly meetings from Week 4 to Week 13. See details in assessment task description.
Late Submissions and Re-submissions
All assessments must be submitted by 23:59pm (Sydney Time) on their due date. Should the activities be missed due to illness or misadventure, students may apply for Special Consideration, as detailed below.
Project Implementation
If your project requires on-campus lab attendance and you are not able to get back to campus on time, please contact with the unit convenor and your supervisor as soon as possible.
Name | Weighting | Hurdle | Due |
---|---|---|---|
Presentation and Oral Examination | 45% | No | Week 14-16 |
Preliminary Thesis | 40% | Yes | Week 13 |
Supervisor Management Assessment | 10% | Yes | Week 13 |
Practice Presentation | 5% | No | Week 10-12 |
Assessment Type 1: Viva/oral examination
Indicative Time on Task 2: 10 hours
Due: Week 14-16
Weighting: 45%
Students are required to deliver a comprehensive presentation and oral defence of their project proposal and progress at the end of the unit.
Assessment Type 1: Thesis
Indicative Time on Task 2: 50 hours
Due: Week 13
Weighting: 40%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
Students are required to prepare a thesis report about their projects, including the literature review, project planning & design, progress and achievements.
Assessment Type 1: Performance
Indicative Time on Task 2: 15 hours
Due: Week 13
Weighting: 10%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
In this unit, development of knowledge and skills will be guided by regular interaction with supervisors. Students must meet with supervisors regularly to show progress and receive feedback. This assessment of performance is made by the student's supervisor. It is comprised of the supervisor's judgement of self-management, engagement, intellectual independence, initiative, as well as judgement of the quality of record keeping & written log book. The logbook should contain dated records of day-to-day activities associated with the project. Outcomes of a minimum of five meetings must be documented using the meeting log sheet provided on iLearn to meet this hurdle assessment task.
Assessment Type 1: Presentation
Indicative Time on Task 2: 10 hours
Due: Week 10-12
Weighting: 5%
Students will undertake a practice presentation and oral exam with their supervisor in the final weeks of session. This would normally take place during regular meetings and serves to guide students as they prepare for the Viva.
1 If you need help with your assignment, please contact:
2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation
Unit Delivery
This is a project-based unit and has no scheduled lectures or tutorial sessions. Special lectures may be organised and related announcements will be made via iLearn.
Logbook
This unit requires a logbook. The students should maintain an individual logbook which should contain a dated log of day-to-day activities undertaken in relation to the project.
Technology Used and Required
The students are required to discuss with their supervisor about the software/hardware resources required for analysis, simulation, testing and experiments related to their project. In addition, word processing software (MS Word, Latex etc.) will be required to produce the preliminary thesis and MS PowerPoint or equivalent software will be required for presentation slides.
Unit Webpage
Access from the online iLearn System at http://ilearn.mq.edu.au
Required and Recommended Texts/Materials
There is not set textbook for this unit. The students are required to discuss with their supervisor regarding required/recommended reading materials, as suited to individual project needs.
Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit connect.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.
The Library provides online and face to face support to help you find and use relevant information resources.
Macquarie University offers a range of Student Support Services including:
Got a question? Ask us via the Service Connect Portal, or contact Service Connect.
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
EA Competency Standard |
Unit Learning Outcomes |
|
Knowledge and Skill Base |
1.1 Comprehensive, theory-based understanding of the underpinning fundamentals applicable to the engineering discipline. |
|
1.2 Conceptual understanding of underpinning maths, analysis, statistics, computing. |
|
|
1.3 In-depth understanding of specialist bodies of knowledge |
ULO1, ULO3 |
|
1.4 Discernment of knowledge development and research directions |
ULO3 |
|
1.5 Knowledge of engineering design practice |
ULO3 |
|
1.6 Understanding of scope, principles, norms, accountabilities of sustainable engineering practice. |
ULO3 | |
Engineering Application Ability |
2.1 Application of established engineering methods to complex problem solving |
ULO1, ULO4 |
2.2 Fluent application of engineering techniques, tools and resources. |
ULO4 |
|
2.3 Application of systematic engineering synthesis and design processes. |
ULO4 |
|
2.4 Application of systematic approaches to the conduct and management of engineering projects. |
ULO2, ULO4 |
|
Professional and Personal Attributes |
3.1 Ethical conduct and professional accountability. |
|
3.2 Effective oral and written communication in professional and lay domains. |
ULO2, ULO5 |
|
3.3 Creative, innovative and pro-active demeanour. |
ULO5 |
|
3.4 Professional use and management of information. |
ULO2 |
|
3.5 Orderly management of self, and professional conduct. |
ULO2, ULO5 |
|
3.6 Effective team membership and team leadership |
Unit information based on version 2024.02 of the Handbook