Unit convenor and teaching staff |
Unit convenor and teaching staff
Unit convenor
Iliana Skrebneva
Contact via Contact via email
Please email to organise a time if you would like a meeting.
|
---|---|
Credit points |
Credit points
10
|
Prerequisites |
Prerequisites
|
Corequisites |
Corequisites
EDST8200
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
This unit provides students with an introduction to inclusive educational principles and practices supported by evidence-based research. |
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
General Submission Information
All assessments must be submitted electronically. Turnitin plagiarism detection software is used to check all written assessments. It is the responsibility of all students to ensure that their submitted work is in a format compatible with Turnitin software for plagiarism checking. Submissions must meet the required file type and formatting specifications outlined in the assessment guidelines. Failure to submit work in an acceptable format may result in delays in processing your submission and potential penalties for non-compliance with assessment requirements. If you are unsure about the file format or have technical difficulties, it is your responsibility to seek assistance before the submission deadline. Students should be careful to check that they submit the correct file for an assessment as no re-submissions will be accepted after the due date and time, including instances where students upload an incorrect file. It is not the responsibility of unit staff to contact students who have failed to submit assessments. If you have any missing items of assessment, it is your responsibility to contact the unit convenor.
Students can use Turnitin’s Originality Report as a learning tool to improve their academic writing if this option is made available in the unit.
Word limits are strictly applied. Work above the word limit will not be marked.
Use of Artificial Intelligence (AI)
Students should be aware of and apply the University policy on academic integrity (see: https://policies.mq.edu.au/document/view.php?id=3). Any student suspected of using unauthorised AI in an assignment will be referred to the Faculty of Arts Discipline Committee. Penalties can include reduced marks for an assessment, being awarded '0' for a task, failing an entire unit, being excluded from a course of study. Please see each assessment task description/rubric for expectations about AI.
Special Consideration / Late Penalties
Unless a Special Consideration request has been submitted and approved, a 5% penalty (of the total possible mark) will be applied each day an assessment is not submitted, up until the 7th day (including weekends) (see: https://students.mq.edu.au/study/assessment-exams/special-consideration). Applications for extensions must be made via Service Connect. After the 7th day, a mark of 0 (zero) will be awarded even if the assessment is submitted. Submission time for all written assessments is set at 11:55pm. A 1-hour grace period is provided to students who experience a technical issue. This late penalty will apply to non-timed sensitive assessments (incl. essays, reports, posters, portfolios, journals, recordings etc).
Late submission of time sensitive tasks (such as tests/exams, performance assessments/presentations, scheduled practical assessments/labs etc) will only be addressed by the unit convenor in a Special Consideration application. A Special Consideration outcome may result in a new question or topic.
Marking
All assessments are marked using a rubric.
Marking of all assessments is moderated by the Unit Convenor.
University Policy on Grading
Assignments will be awarded grades ranging from HD to F according to guidelines set out in the University's Grading System and University Assessment Policy.
To attain a pass or higher grade in Professional Experience a student must obtain a satisfactory in both the Professional Experience component and a pass or higher grade in the academic component. For Professional Experience units the Professional Experience Evaluation Report is marked as Satisfactory or Unsatisfactory. The Macquarie Teaching Performance Assessment (MQTPA - in final WIL/PEx units) is marked as Not met, Met or Exceeds.
Results
Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed because they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit Service Connect.
Withdrawing from this unit
If you are considering withdrawing from this unit, please seek academic advice via Service Connect before doing so as this unit may be a co-requisite or prerequisite for units in the following sessions and may impact your course progression.
Name | Weighting | Hurdle | Due |
---|---|---|---|
Resource folder | 50% | No | 23:55 23/04/2025 |
Professional Experience Report | 0% | Yes | 23:55 08/06/2025 |
Inclusion Portfolio | 50% | No | 23:55 11/06/2025 |
Assessment Type 1: Literature review
Indicative Time on Task 2: 12.5 hours
Due: 23:55 23/04/2025
Weighting: 50%
Students will find resources that support inclusion that relate to the Primary or Secondary school context. Students will discuss the strengths and weaknesses of each resource using relevant literature to support their analysis.
Assessment Type 1: Practice-based task
Indicative Time on Task 2: 0 hours
Due: 23:55 08/06/2025
Weighting: 0%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
This report is completed by the supervising teacher as an assessment of the student's placement success. Students submit PEx Evaluation report. It is marked as satisfactory or unsatisfactory.
Assessment Type 1: Portfolio
Indicative Time on Task 2: 0 hours
Due: 23:55 11/06/2025
Weighting: 50%
Whilst on Professional Experience placement students will complete a SWOT analysis of the classroom in relation to inclusion using the principles outlined in the weekly lectures. The analysis will include who is included and/or excluded and why. The analysis will be supported with evidence-based literature and links to relevant government reports, policies and legislation.
1 If you need help with your assignment, please contact:
2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation
Resources
Required and recommended texts
Information about the unit iLearn site
This unit has a full web presence through iLearn. Information for students about access to the online component of this unit is available at https://ilearn.mq.edu.au/login/index.php. You will need to enter your student username and password.
Please do NOT contact the Unit Convenor regarding iLearn technical help. Assistance is available from IT Helpdesk: via email onehelp@mq.edu.au or Ph: 9850 4357 or 1800 67 4357. On Campus: Ground floor at 18 Wally’s Walk.
The schedule of learning and teaching (including weekly readings) is located in iLearn.
The block professional experience placement in this unit will be: 12/05/2025 – 30/05/2025.
Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit connect.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Academic Success provides resources to develop your English language proficiency, academic writing, and communication skills.
The Library provides online and face to face support to help you find and use relevant information resources.
Macquarie University offers a range of Student Support Services including:
Got a question? Ask us via the Service Connect Portal, or contact Service Connect.
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
School of Education Procedures
In addition, the following policies and procedures for the Macquarie School of Education apply to this unit.
Academic Progression Policy
This unit is a part of a professional course listed on Schedules 2 and 3 of the Academic Progression Policy. This course has additional requirements that are applicable for the full duration of the course, including course-specific Inherent Requirements, Fitness to Practice requirements and other compulsory course requirements. It also has rigorous academic progression standards. Inability to meet these requirements may result in a withdrawal of offer of admission and/or permanent exclusion from the course in accordance with the General Coursework Rules.
Fitness to practice in a Professional Experience unit
Macquarie University operates under a ‘Fitness to Practice’ model as specified in the University's Academic Progression Policy. For this unit, this means that, when undertaking a placement, a student is declaring that they are able to demonstrate professional competence, acceptable professional behaviour, freedom from impairment, and compliance with program specific requirements needed for a student to practice properly and safely throughout their Practical, Clinical or Professional program or unit. It is the responsibility of the student to determine whether they are fit to undertake a placement. Therefore, if a student is feeling unfit to undertake a placement, they should not do so. For more information Academic Progression Policy.
Communication
It is the student’s responsibility to check all electronic communication on a weekly basis. Communication may occur via:
Attendance and Participation
See the University timetable for information about when classes begin in this unit. Creating your timetable - Enrolling | Macquarie University, Sydney (mq.edu.au)
Attendance at all synchronous activities, completion of non-synchronous formative/diagnostic class tasks and involvement in professional forums is expected as the Master of Teaching is a professional qualification. Activities completed during weekly tutorials (DAY or ONLINE DAY mode) are essential for building the core knowledge and/or skills required to demonstrate the learning outcomes of this unit and to meet the AITSL Graduate Teacher Standards and/or ACECQA requirements. Attendance at all tutorials is expected and will be recorded. Make up tasks may be given if attendance is missed to ensure all content is covered to meet accreditation requirements.
Students are required to attend the tutorial in which they are enrolled. Any changes to tutorial enrolments must be completed officially through e-Student. Please do not contact the unit convenor to request a change.
Professional Experience Unit Expectations
Unit information based on version 2025.01 of the Handbook