| Unit convenor and teaching staff |
Unit convenor and teaching staff
Convenor
Rebecca Stuart
Contact via Via Contact Teaching Staff Forum in iLearn
NA
As arranged via iLearn forum
|
|---|---|
| Credit points |
Credit points
10
|
| Prerequisites |
Prerequisites
80cps and EDST8999 and (EDST8211 or EDST8238 or EDST8520)
|
| Corequisites |
Corequisites
(Admission into MTeach (Prim) and EDST8212 or EDST8213 ) OR (Admission into MTeach (Secondary) and (EDST8219 or EDST8221 or EDST8223 or EDST8225 or EDST8227 or EDST8229 or EDST8231 or EDST8233 or EDST8235 or EDST8601 or EDST8603 or EDST8611 or EDST8613 or EDST8621 or EDST8623))
|
| Co-badged status |
Co-badged status
|
| Unit description |
Unit description
This unit is a Professional Experience unit for intending primary/secondary school teachers. This unit synthesies students' knowledge of teaching diverse learners and skills in independent educational research. Students will teach in a school for 30 days under the guidance of a Supervising Teacher and concurrently conduct practitioner research to meet the requirements of the mandatory NESA Teaching Performance Assessment (TPA). |
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
All written assessments must be submitted electronically. Please format assessments using 12-point font and 1.5 spacing. Submissions must meet the required file type and formatting specifications outlined in the assessment guidelines. If you are unsure about the file format or have technical difficulties, it is your responsibility to seek assistance before the submission deadline. Students should be careful to check that they submit the correct file for an assessment as no re-submissions will be accepted after the due date and time, including instances where students upload an incorrect file. It is not the responsibility of unit staff to contact students who have failed to submit assessments. If you have any missing items of assessment, it is your responsibility to contact the unit convenor.
Turnitin plagiarism detection software is used to check all written assessments. It is the responsibility of all students to ensure that their submitted work is in a format compatible with Turnitin software for plagiarism checking. Students can use Turnitin’s Originality Report as a learning tool to improve their academic writing if this option is made available in the unit.
Word limits are strictly applied, with + or – 10% applicable. Work above the word limit will not be marked.
Students should be aware of and apply the University policy on academic integrity (see: https://policies.mq.edu.au/document/view.php?id=3).
Unless a Special Consideration request has been submitted and approved, a 5% penalty (of the total possible mark) will be applied each day to late submissions, up until the 7th calendar day (including weekends). After the 7th day, a mark of ‘0’ (zero) will be awarded even if the assessment is submitted. Submission time for all written assessments is set at 11.55pm. A 1-hour grace period is provided to students who experience a technical issue.
Important to note:
Late submission of time sensitive tasks (such as tests/exams, performance assessments/presentations, scheduled practical assessments/labs) will be addressed by the unit convenor in a Special consideration application.
Students should not request an informal arrangement from their tutor, lecturer or Unit Convenor (or equivalent).
Where an application for Special Consideration is approved and the outcome is an extension to the due date of a task, submissions that are received after the new due date will be subject to late penalties that are calculated from the new due date. This only applies where the outcome is an extension to the due date – see the Special Consideration Policy for a schedule of all possible outcomes.
A Special Consideration outcome may result in a new question or topic.
Applications must be made via Service Connect.
Assignments will be awarded grades ranging from HD to F according to guidelines set out in the University's Grading System and University Assessment Policy.
To attain a pass or higher grade in Professional Experience a student must obtain a satisfactory in both the Professional Experience component and a pass or higher grade in the academic component. For Professional Experience units the Professional Experience Evaluation Report is marked as Satisfactory or Unsatisfactory. The Macquarie Teaching Performance Assessment (MQTPA - in final WIL/PEx units) is marked as Not met, Met or Exceeds.
Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed because they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit Service Connect.
If you are considering withdrawing from this unit, please seek academic advice via Service Connect before doing so as this unit may be a co-requisite or prerequisite for units in the following sessions and may impact your course progression.
| Name | Weighting | Hurdle | Due | Groupwork/Individual | Short Extension | AI Approach |
|---|---|---|---|---|---|---|
| Supervising Teachers' Professional Experience Evaluation Report | 0% | Yes | End of placement | Individual | No | Observed |
| Teaching Performance Assessment | 100% | No | 26/10/2026 | Individual | Yes | Open |
Assessment Type 1: Professional task
Indicative Time on Task 2: 0 hours
Due: End of placement
Weighting: 0%
Groupwork/Individual: Individual
Short extension 3: No
AI Approach: Observed
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
This report is completed by the Supervising Teacher on completion of the student's 30 day Professional Experience placement (Including the TPA) using the AITSL Graduate Teaching Standards.
Assessment Type 1: Professional task
Indicative Time on Task 2: 10 hours
Due: 26/10/2026
Weighting: 100%
Groupwork/Individual: Individual
Short extension 3: Yes
AI Approach: Open
Pass/Fail completed on placement (no word limit). Teaching Performance Assessment(NESA requirement) includes: choosing 5 focus students and planning teaching and assessing through a process of reflexive practice.
1 If you need help with your assignment, please contact:
2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation.
3 An automatic short extension is available for some assessments. Apply through the Service Connect Portal.
EDST8240 blends face to face and online delivery to support professional experience placement in schools.
Students must be familiar with the Teacher Education Students section of the MQ Professional Experience website https://students.mq.edu.au/study/course/teacher-education-students
A close reading of the following documents on the EDCOMMS iLearn site should be completed before commencing the Professional Experience and the MQTPA lecture series and Podcasts are highly recommended.
The Australian Professional Standards for Teachers can be found on the website of the Australian Institute for Teaching and School Leadership (AITSL) https://www.aitsl.edu.au/standards and the NSW Education Stanards Authority(NESA) website https://educationstandards.nsw.edu.au/wps/portal/nesa/teacher-accreditation/meeting-requirements/the-standards
This unit has a full web presence through iLearn. Information for students about access to the online component of this unit is available at https://ilearn.mq.edu.au/login/index.php. You will need to enter your student username and password.
Please do NOT contact the Unit Convenor regarding iLearn technical help. Assistance is available from IT Helpdesk: via email onehelp@mq.edu.au or Ph: 9850 4357 or 1800 67 4357. On Campus: Ground floor at 18 Wally’s Walk.
A detailed overview of the unit schedule is published in iLearn.
Key topics covered are Professional Experience and the Teaching Performance Assessment.
Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit connect.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.
In addition, the following policies and procedures for the Macquarie School of Education apply to this unit.
This unit is a part of a professional course listed on Schedules 2 and 3 of the Academic Progression Policy. This course has additional requirements that are applicable for the full duration of the course, including course-specific Inherent Requirements, Fitness to Practice requirements and other compulsory course requirements. It also has rigorous academic progression standards. Inability to meet these requirements may result in a withdrawal of offer of admission and/or permanent exclusion from the course in accordance with the General Coursework Rules.
Macquarie University operates under a ‘Fitness to Practice’ model as specified in the University's Academic Progression Policy. For this unit, this means that, when undertaking a placement, a student is declaring that they are able to demonstrate professional competence, acceptable professional behaviour, freedom from impairment, and compliance with program specific requirements needed for a student to practice properly and safely throughout their Practical, Clinical or Professional program or unit. It is the responsibility of the student to determine whether they are fit to undertake a placement. Therefore, if a student is feeling unfit to undertake a placement, they should not do so. For more information see the Academic Progression Policy.
It is the student’s responsibility to check all electronic communication on a weekly basis. Communication may occur via:
Official MQ Student Email Address
The Dialogue function on iLearn
Other iLearn communication functions
See the University timetable for information about when classes begin in this unit. Creating your timetable - Enrolling | Macquarie University, Sydney (mq.edu.au). Students are required to attend the tutorial in which they are enrolled. Any changes to tutorial enrolments must be completed officially through e-Student. Please do not contact the unit convenor to request a change.
There is an attendance requirement in this unit. Initial Teacher Education (ITE) degrees must ensure that teacher education students meet unit learning outcomes, course learning outcomes and the Graduate level of the Australian Professional Standards for Teachers. Since units are within an accredited ITE degree, Macquarie School of Education is required to demonstrate these outcomes and standards have been taught, practised and assessed. To meet ‘taught, practiced and assessed’ accreditation requirements, ITE units have mandatory attendance, with an expectation of at least 80% attendance at tutorials. Please see your unit iLearn site for details of how to meet attendance requirements in this unit.
Information about the dates of the on-campus sessions can be found in the university timetable. Creating your timetable - Enrolling | Macquarie University, Sydney (mq.edu.au)
The on-campus sessions are essential to student engagement and learning and attendance is expected.
Prior to the on-campus sessions, students should have read the prescribed readings and listened to the lectures, summarise the main points, and make notes of the key terms and definitions. Prepare any discussion questions of your own that you wish to share.
Please make effective use of the online component of the unit and access iLearn regularly.
Further details and any updates about times and locations will be posted on iLearn as an Announcement during first half of the semester.
Important Professional Experience information can be found on Education Commons – see iLearn for details of how to self-enrol in Education Commons
Students must be able to present evidence of completion of mandatory requirements prior to session census date (or as otherwise advised) to receive a placement for Professional Experience. Please check your email from the Work Integrated Learning (WIL) Office. Requirements are outlined here: https://education.nsw.gov.au/teaching-and-learning/professional-learning/pl-resources/pre-service-teacher-resources/induction-for-pre-service-teachers/mandatory-pre-requisites-for-pre-service-teachers-participating-
Students must have submitted written assessment tasks and/or completed associated unit requirements scheduled prior to the commencement of the block.
Students who are completing a unit offered by another Department are expected to inform and negotiate with that unit convenor about their professional experience block dates and discuss how that unit's requirements can be met. For some situations it may mean that a student is enrolled externally for that unit so that attendance for tutorials for that unit is not impacted.
Feedback from Placement Support Team and/or Tertiary Supervisors and/or Supervising Teachers is of a general nature. It is incumbent on the student to check the requirements of any assessments or Professional Experience written tasks prior to submission.
Students may not be able to commence their placement until all alleged academic honesty breaches have been investigated and resolved.
The timing of placements can vary. For placements early in the session, fail grades may be approved by the university prior to the end of session for students who do not meet the placement expectations of the unit.
If a student is identified as being In Need of Additional Support (INAS) for Professional Practice and/or Professional Experience written tasks, the Macquarie School of Education’s ‘Additional Support’ procedure will be activated.
To enrol in EDST8240 PEx Unit you must have met the standard for both the Literacy and Numeracy tests prior to commencing a Year 2 PEx unit. Enrolling in EDST8240 while waiting for your results will not be accepted. You will be required to unenrol.
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Academic Success provides resources to develop your English language proficiency, academic writing, and communication skills.
The Library provides online and face to face support to help you find and use relevant information resources.
Macquarie University offers a range of Student Support Services including:
Got a question? Ask us via the Service Connect Portal, or contact Service Connect.
For help with University computer systems and technology, visit https://students.mq.edu.au/support/technology/service-desk.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
Unit information based on version 2026.05 of the Handbook