| Unit convenor and teaching staff |
Unit convenor and teaching staff
Susan Busatto
tutor
Melissa Vlakic
tutor
Garry Jones
|
|---|---|
| Credit points |
Credit points
10
|
| Prerequisites |
Prerequisites
Admission to BABEd(Primary) or BEd(Prim)BPsyc or BEd(Prim) or BEd(EC and Prim)
|
| Corequisites |
Corequisites
|
| Co-badged status |
Co-badged status
|
| Unit description |
Unit description
This unit is designed for students intending to teach in primary schools but who did not achieve a minimum of Band 4 in HSC mathematics. The unit focuses on fundamental mathematical techniques and their application to problem solving. The unit adopts a practical, hands-on approach to help students develop and apply their mathematical knowledge and skills in number and algebra, measurement and geometry, statistics and probability. |
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
General Submission Information
All written assessments must be submitted electronically. Please format assessments using 12-point font and 1.5 spacing. Submissions must meet the required file type and formatting specifications outlined in the assessment guidelines. If you are unsure about the file format or have technical difficulties, it is your responsibility to seek assistance before the submission deadline. Students should be careful to check that they submit the correct file for an assessment as no re-submissions will be accepted after the due date and time, including instances where students upload an incorrect file. It is not the responsibility of unit staff to contact students who have failed to submit assessments. If you have any missing items of assessment, it is your responsibility to contact the unit convenor.
Turnitin plagiarism detection software is used to check all written assessments. It is the responsibility of all students to ensure that their submitted work is in a format compatible with Turnitin software for plagiarism checking. Students can use Turnitin’s Originality Report as a learning tool to improve their academic writing if this option is made available in the unit.
Word limits are strictly applied, with + or – 10% applicable. Work above the word limit will not be marked.
Academic Integrity
Students should be aware of and apply the University policy on academic integrity (see: https://policies.mq.edu.au/document/view.php?id=3).
Artificial Intelligence
General Submission Information
All written assessments must be submitted electronically. Please format assessments using 12-point font and 1.5 spacing. Submissions must meet the required file type and formatting specifications outlined in the assessment guidelines. If you are unsure about the file format or have technical difficulties, it is your responsibility to seek assistance before the submission deadline. Students should be careful to check that they submit the correct file for an assessment as no re-submissions will be accepted after the due date and time, including instances where students upload an incorrect file. It is not the responsibility of unit staff to contact students who have failed to submit assessments. If you have any missing items of assessment, it is your responsibility to contact the unit convenor.
Turnitin plagiarism detection software is used to check all written assessments. It is the responsibility of all students to ensure that their submitted work is in a format compatible with Turnitin software for plagiarism checking. Students can use Turnitin’s Originality Report as a learning tool to improve their academic writing if this option is made available in the unit.
Word limits are strictly applied, with + or – 10% applicable. Work above the word limit will not be marked.
Academic Integrity
Students should be aware of and apply the University policy on academic integrity (see: https://policies.mq.edu.au/document/view.php?id=3).
Artificial Intelligence
Special Consideration / Late Penalties
Unless a Special Consideration request has been submitted and approved, a 5% penalty (of the total possible mark) will be applied each day to late submissions, up until the 7th calendar day (including weekends). After the 7th day, a mark of ‘0’ (zero) will be awarded even if the assessment is submitted. Submission time for all written assessments is set at 11.55pm. A 1-hour grace period is provided to students who experience a technical issue.
Important to note:
Late submission of time sensitive tasks (such as tests/exams, performance assessments/presentations, scheduled practical assessments/labs) will be addressed by the unit convenor in a Special consideration application.
Students should not request an informal arrangement from their tutor, lecturer or Unit Convenor (or equivalent).
Where an application for Special Consideration is approved and the outcome is an extension to the due date of a task, submissions that are received after the new due date will be subject to late penalties that are calculated from the new due date. This only applies where the outcome is an extension to the due date – see the Special Consideration Policy for a schedule of all possible outcomes.
A Special Consideration outcome may result in a new question or topic.
Applications must be made via Service Connect.
Quiz
The quiz is an individual assessment task and must be completed by each student individually. Similarities in responses between students will be checked and investigated for possible collusion.
University Policy on Grading
Assignments will be awarded grades ranging from HD to F according to guidelines set out in the University's Grading System and University Assessment Policy.
To attain a pass or higher grade in Professional Experience a student must obtain a satisfactory in both the Professional Experience component and a pass or higher grade in the academic component. For Professional Experience units the Professional Experience Evaluation Report is marked as Satisfactory or Unsatisfactory. The Macquarie Teaching Performance Assessment (MQTPA - in final WIL/PEx units) is marked as Not met, Met or Exceeds.
Results
Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed because they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit Service Connect.
Withdrawing from this unit
If you are considering withdrawing from this unit, please seek academic advice via Service Connect before doing so as this unit may be a co-requisite or prerequisite for units in the following sessions and may impact your course progression.
| Name | Weighting | Hurdle | Due | Groupwork/Individual | Short Extension | AI Approach |
|---|---|---|---|---|---|---|
| Mathematics Problem Set 1 | 25% | Yes | During Week 4 tutorial | Individual | No | Observed |
| Mathematics Problem Set 2 | 25% | Yes | During Week 7 tutorial | Individual | No | Observed |
| Mathematics Problem Set 3 | 25% | Yes | During Week 8 tutorial | Individual | No | Observed |
| Mathematics Problem Set 4 | 25% | Yes | During Week 13 tutorial | Individual | No | Observed |
Assessment Type 1: Problem-based task
Indicative Time on Task 2: 22.5 hours
Due: During Week 4 tutorial
Weighting: 25%
Groupwork/Individual: Individual
Short extension 3: No
AI Approach: Observed
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
Problem sets covering the content for the unit. Students will be given up to three attempts for each problem set. Students need to pass all problem sets to pass the unit. This unit is a new NESA accreditation rule for Primary ITE students who do not meet Band 4 HSC maths.
Assessment Type 1: Problem-based task
Indicative Time on Task 2: 22.5 hours
Due: During Week 7 tutorial
Weighting: 25%
Groupwork/Individual: Individual
Short extension 3: No
AI Approach: Observed
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
Problem sets covering the content for the unit. Students will be given up to three attempts for each problem set. Students need to pass all problem sets to pass the unit. This unit is a new NESA accreditation rule for Primary ITE students who do not meet Band 4 HSC maths.
Assessment Type 1: Problem-based task
Indicative Time on Task 2: 22.5 hours
Due: During Week 8 tutorial
Weighting: 25%
Groupwork/Individual: Individual
Short extension 3: No
AI Approach: Observed
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
Problem sets covering the content for the unit. Students will be given up to three attempts for each problem set. Students need to pass all problem sets to pass the unit. This unit is a new NESA accreditation rule for Primary ITE students who do not meet Band 4 HSC maths.
Assessment Type 1: Problem-based task
Indicative Time on Task 2: 22.5 hours
Due: During Week 13 tutorial
Weighting: 25%
Groupwork/Individual: Individual
Short extension 3: No
AI Approach: Observed
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
Problem sets covering the content for the unit. Students will be given up to three attempts for each problem set. Students need to pass all problem sets to pass the unit. This unit is a new NESA accreditation rule for Primary ITE students who do not meet Band 4 HSC maths.
1 If you need help with your assignment, please contact:
2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation.
3 An automatic short extension is available for some assessments. Apply through the Service Connect Portal.
There are no required texts for this unit. On-line resources and additional information about the unit is on the iLearn site
This unit has a full web presence through iLearn. Information for students about access to the online component of this unit is available at https://ilearn.mq.edu.au/login/index.php. You will need to enter your student username and password.
Please do NOT contact the Unit Convenor regarding iLearn technical help. Assistance is available from IT Helpdesk: via email onehelp@mq.edu.au or Ph: 9850 4357 or 1800 67 4357. On Campus: Ground floor at 18 Wally’s Walk.
The week by week outline of the unit is available on iLearn.
Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit connect.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.
Academic Progression Policy
This unit is a part of a professional course listed on Schedules 2 and 3 of the Academic Progression Policy. This course has additional requirements that are applicable for the full duration of the course, including course-specific Inherent Requirements, Fitness to Practice requirements and other compulsory course requirements. It also has rigorous academic progression standards. Inability to meet these requirements may result in a withdrawal of offer of admission and/or permanent exclusion from the course in accordance with the General Coursework Rules.
Fitness to practice in a Professional Experience unit
Macquarie University operates under a ‘Fitness to Practice’ model as specified in the University's Academic Progression Policy. For this unit, this means that, when undertaking a placement, a student is declaring that they are able to demonstrate professional competence, acceptable professional behaviour, freedom from impairment, and compliance with program specific requirements needed for a student to practice properly and safely throughout their Practical, Clinical or Professional program or unit. It is the responsibility of the student to determine whether they are fit to undertake a placement. Therefore, if a student is feeling unfit to undertake a placement, they should not do so. For more information see the Academic Progression Policy.
Communication
It is the student’s responsibility to check all electronic communication on a weekly basis. Communication may occur via:
Official MQ Student Email Address
The Dialogue function on iLearn
Other iLearn communication functions
Attendance and Participation
See the University timetable for information about when classes begin in this unit. Creating your timetable - Enrolling | Macquarie University, Sydney (mq.edu.au). Students are required to attend the tutorial in which they are enrolled. Any changes to tutorial enrolments must be completed officially through e-Student. Please do not contact the unit convenor to request a change.
There is an attendance requirement in this unit. Initial Teacher Education (ITE) degrees must ensure that teacher education students meet unit learning outcomes, course learning outcomes and the Graduate level of the Australian Professional Standards for Teachers. Since units are within an accredited ITE degree, Macquarie School of Education is required to demonstrate these outcomes and standards have been taught, practised and assessed. To meet ‘taught, practiced and assessed’ accreditation requirements, ITE units have mandatory attendance, with an expectation of at least 80% attendance at tutorials. Please see your unit iLearn site for details of how to meet attendance requirements in this unit.
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Academic Success provides resources to develop your English language proficiency, academic writing, and communication skills.
The Library provides online and face to face support to help you find and use relevant information resources.
Macquarie University offers a range of Student Support Services including:
Got a question? Ask us via the Service Connect Portal, or contact Service Connect.
For help with University computer systems and technology, visit https://students.mq.edu.au/support/technology/service-desk.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
There will be no Reflection component required in 2026.
Unit information based on version 2026.04 of the Handbook