Unit convenor and teaching staff |
Unit convenor and teaching staff
Unit Convenor
David Inglis
Contact via david.inglis@mq.edu.au
E6B-122
Mondays 4-5pm, Thursday 9-10am
|
---|---|
Credit points |
Credit points
3
|
Prerequisites |
Prerequisites
(60cp at 100 level or above) including (ELEC326 and ELEC324)
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
|
Unit description |
Unit description
This unit integrates prior learning in a specialist area of engineering with problem solving, emerging technology and aspects of engineering application, technical reporting and self-management to prepare students to work at a professional capacity. The unit aims to address the application of fundamental principles and methods at an advanced level in the context of standards and practices, modelling, analysis, design and practical implementation. The unit also develops skills in the critical evaluation of information, software and sources of error, and experimental methods. Learning will be achieved using case studies, laboratories, presentations, group work and/or traditional lecture format. The specific topics will focus on current advances in the area such as microcontrollers, MEMs, nanotechnologies, control systems, sensors and actuators and electro-mechanical interfacing.
|
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
Grading and passing requirement for unit
In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).
For further details about grading, please refer below in the policies and procedures section.
Hurdle Requirements
The final examination is a hurdle requirement. A grade of 40% or more in the final examination is a condition of passing this unit.
Participation in tutorial/practical sessions is a hurdle requirement and students are required to attend at least 8 practical sessions to pass this unit.
Late submissions and Resubmissions
Late submissions will attract a penalty of 10/100 marks per day. Extenuating circumstances will be considered upon lodgment of a formal notice of disruption of studies.
Resubmissions of work are not allowed.
Name | Weighting | Hurdle | Due |
---|---|---|---|
Report 1 – System Parameters | 6% | No | Week 2 |
Homework / Problem sets | 24% | No | See individual tasks |
Report 2 – Circuit diagram | 6% | No | Week 3 |
Report 3 – System model | 6% | No | Week 5 |
Report 4 – System Performance | 6% | No | Week 7 |
Project Demonstration | 6% | No | Week 11 |
Report 6 - Complete Report | 6% | No | week 11 |
Project Logbook | 10% | No | Week 11 Prac |
Final Exam | 30% | Yes | exam period |
Due: Week 2
Weighting: 6%
You will be building a project report throughout the first 11 weeks of this unit. By week 11 each of you will have produced a report that includes the following headings: Introduction, System Parameters, System Model, System Performance. Use 2 cm margins and Arial 10 pt font.
Your task is to model and develop a digital servo controller with for an arm of known mass. You will be given a motor, gearbox, encoder, arm, load, Arduino, motor driver, and power supply.
The first step is to measure your system parameters and begin to write your report. Write a very brief introduction and the system parameters section. Important system parameters include:
This part of the report should not exceed 2 pages, and may need to be shorter to allow your full report in 5 pages. It will be graded as follows for a maximum of 15 marks.
0-5 marks: presentation and report structure. Use a consistent style. Proof-read your document for grammatical and typographical mistakes. Use accurate and concise language. Examples of inaccurate language include: “An elephant went to the store to buy milk. It was awesome” What was awesome, the milk or the trip? “Last night I shot an elephant in my pajamas.” Who was wearing the pajamas, you or the elephant?
0-10 marks: Accurate description of all relevant system parameters.
Due: See individual tasks
Weighting: 24%
4 problem sets, each worth 6%. Questions and rubric to be posted with questions.
Due: Week 3
Weighting: 6%
Prepare an circuit diagram for your system and any accompanying notes that you think are necessary. Remember that it must form a part of a 5 page report. Your diagram should be small, but contain legible text. You may need to edit the document for later submissions, so keep an editable version somewhere. Submit your report, which should include revisions to prior sections.
0-5 marks: presentation and report structure. Use a consistent style. Proof-read your document for grammatical and typographical mistakes. Use accurate and concise language.
0-10 marks: Acceptable circuit diagram with clearly labelled components.
Due: Week 5
Weighting: 6%
Complete a section describing an electromechanical model of the system. Here you must derive an equation of motion for your system. Describe assumptions and expected limitations of the model. A limitation is something that your model is ignoring, for example, electrical inductance. You should include some form of closed loop control. Pay careful attention to how friction affects the system motion.
0-5 marks: presentation and report structure. Use a consistent style. Proof-read your document for grammatical and typographical mistakes. Use accurate and concise language.
0-10 marks: Clear, accurate, and concise treatment of the electromechanical system
Due: Week 7
Weighting: 6%
Begin work on system performance section. Model system performance using a numerical method in matlab. There is no need to use any complicated functions. Start from an initial position with speed of 0, then step forward in time, using your equation of motion to predict each new position and speed. Create polar plots of overshoot, steady state error and settling time for 15 and 45 degree moves. You do not need a data point at every degree, every 10 degrees is OK. This should be three plots, each with 2 curves on them. Keep them compact and use large fonts.
0-5 marks: presentation and report structure. Use a consistent style. Proof-read your document for grammatical and typographical mistakes. Use accurate and concise language.
0-10 marks: Well-presented numerical model with clear plots and performance indicators.
Due: Week 11
Weighting: 6%
Your system will be graded in week 11. Each system (for a group of 2) will receive 1 grade. Log books for that group will be used to create individual grades for the demonstration where the average of the individual grades will equal the group grade
. Draft assessment criteria: D for a system with less than 1 degree of overshoot, for any step change up to 90 degrees, less than 1 degree of SSE, and less than 3 second response time. Cr for 1-2 degrees overshoot or SSE. An unstable system or anything with more than 5 degrees SSE or overshoot, or exceedingly long (>10s) settling time is considered a fail. This is the first time this has been run, so these criteria may be changed.
Due: week 11
Weighting: 6%
Complete your report by adding measured data to your system response plots. Compare the measured data to the model predictions. Be sure the model data reflects system parameters described earlier in the report. Include descriptions of how the measurements were made and what their significance is.
Due: Week 11 Prac
Weighting: 10%
Whenever working on your major project you should use an individual log book to document your progress. This may be a bound paper document or an electronic log. In grading you log book, we will be looking for dates and times of work done, as well as evidence of quality work, especially the application of science or engineering practice. This is your chance to show the good work you have done on the group project. Include sketches, diagrams, calculations, data etc. A table of contents, which is completed as you go, and points to significant or useful pages can also be useful. (One third of marks for evidence of work and attendance in pracs; one third for legibility, traceability and organisation; one third for evidence of Technical content including sketches, calculations etc.
Your log book will be used to determine an individual grade for the Project Demonstration.
Due: exam period
Weighting: 30%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
The final exam will cover topics dealt with in lectures and on assignments. You are permitted one A4 sheet of hand-written notes.
Delivery: Attendance in lectures is strongly recommended. Audio or video recordings of the lecture may not be available.
Textbook Resources: Selected topics from:
A. Smaili and F. Mrad, “Mechatronics, Integrated Technologies for Intelligent Machines”, Oxford University Press, 2008.
Nanua Singh, “Systems Approach to Computer-integrated Design and Manufacturing”
John J. Craig, “Introduction to Robotics”
Serope Kalpakjian, “Manufacturing Engineering and Technology”
Additional recommended readings may be assigned and provided in iLearn.
Technology and Software: We will make use of MATLAB for modelling and Arduino for embedded system programming. Students will also use python and ROS on linux. You will have access to computers with this software during prac, however access to these programs outside of prac will be beneficial. We strongly recommend students bring their own devices with admin privledges.
Late Submissions: Unless agreed to in advance of due dates, late submissions will not be allowed.
Extensions: Extensions may be granted if a valid case for disruption to studies exits. See policies and procedures below.
A unit schedule will be available on iLearn.
Macquarie University policies and procedures are accessible from Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Undergraduate students seeking more policy resources can visit the Student Policy Gateway (https://students.mq.edu.au/support/study/student-policy-gateway). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
If you would like to see all the policies relevant to Learning and Teaching visit Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central).
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/study/getting-started/student-conduct
Results shown in iLearn, or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au.
No extensions will be granted. Late tasks will be accepted up to 72* hours after the submission deadline. There will be a deduction of 20%* of the total available marks made from the total awarded mark for each 24 hour period or part thereof that the submission is late (for example, 25 hours late in submission – 40% penalty). This penalty does not apply for cases in which an application for special consideration is made and approved.
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to improve your marks and take control of your study.
Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.
For all student enquiries, visit Student Connect at ask.mq.edu.au
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
Our graduates will also be capable of creative thinking and of creating knowledge. They will be imaginative and open to experience and capable of innovation at work and in the community. We want them to be engaged in applying their critical, creative thinking.
This graduate capability is supported by:
We want our graduates to have emotional intelligence and sound interpersonal skills and to demonstrate discernment and common sense in their professional and personal judgement. They will exercise initiative as needed. They will be capable of risk assessment, and be able to handle ambiguity and complexity, enabling them to be adaptable in diverse and changing environments.
This graduate capability is supported by:
Our graduates will have enquiring minds and a literate curiosity which will lead them to pursue knowledge for its own sake. They will continue to pursue learning in their careers and as they participate in the world. They will be capable of reflecting on their experiences and relationships with others and the environment, learning from them, and growing - personally, professionally and socially.
This graduate capability is supported by:
Our graduates will take with them the intellectual development, depth and breadth of knowledge, scholarly understanding, and specific subject content in their chosen fields to make them competent and confident in their subject or profession. They will be able to demonstrate, where relevant, professional technical competence and meet professional standards. They will be able to articulate the structure of knowledge of their discipline, be able to adapt discipline-specific knowledge to novel situations, and be able to contribute from their discipline to inter-disciplinary solutions to problems.
This graduate capability is supported by:
We want our graduates to be capable of reasoning, questioning and analysing, and to integrate and synthesise learning and knowledge from a range of sources and environments; to be able to critique constraints, assumptions and limitations; to be able to think independently and systemically in relation to scholarly activity, in the workplace, and in the world. We want them to have a level of scientific and information technology literacy.
This graduate capability is supported by:
Our graduates should be capable of researching; of analysing, and interpreting and assessing data and information in various forms; of drawing connections across fields of knowledge; and they should be able to relate their knowledge to complex situations at work or in the world, in order to diagnose and solve problems. We want them to have the confidence to take the initiative in doing so, within an awareness of their own limitations.
This graduate capability is supported by:
We want to develop in our students the ability to communicate and convey their views in forms effective with different audiences. We want our graduates to take with them the capability to read, listen, question, gather and evaluate information resources in a variety of formats, assess, write clearly, speak effectively, and to use visual communication and communication technologies as appropriate.
This graduate capability is supported by:
As local citizens our graduates will be aware of indigenous perspectives and of the nation's historical context. They will be engaged with the challenges of contemporary society and with knowledge and ideas. We want our graduates to have respect for diversity, to be open-minded, sensitive to others and inclusive, and to be open to other cultures and perspectives: they should have a level of cultural literacy. Our graduates should be aware of disadvantage and social justice, and be willing to participate to help create a wiser and better society.
This graduate capability is supported by:
Inclusion of neural nets and ROS, removal of robotic kinematics.
Final exam hurdle lowered to 40%.
Better guidance in tutorials will be emphasized by improved tutor preparation