Students
ENGG805 – Engineering Project 1
2019 – S2 Day
General Information
Download as PDF
| Unit convenor and teaching staff |
Unit convenor and teaching staff
Unit Convenor
Raheel Hashmi
Contact via 98509130
136-44WR
Unit Convenor
Hazer Inaltekin
Contact via 98502280
133-44WR
|
|---|---|
| Credit points |
Credit points
4
|
| Prerequisites |
Prerequisites
Admission to MEng
|
| Corequisites |
Corequisites
|
| Co-badged status |
Co-badged status
|
| Unit description |
Unit description
Students in this unit will undertake a major project in the field of engineering, under the supervision of an academic member of staff. Where the work is carried out externally at a suitable, industrially-based co-supervisor may be required. At the end of the work a comprehensive research report will be submitted. The communication vehicle for this unit is primarily focused on internal engineering project team communications.
|
Important Academic Dates
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
Learning Outcomes
On successful completion of this unit, you will be able to:
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
General Assessment Information
Grading and passing requirement for unit
In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).
For further details about grading, please refer below in the policies and procedures section.
Hurdle Requirements
The Preliminary Thesis is a hurdle requirement. A grade of 50% or more on the Preliminary Thesis is a condition of passing this unit. If you are given a second opportunity to submit your thesis as a result of failing to meet the minimum mark required, your submission will be due during the supplementary examination period and will be notified of the exact day and time by the unit convenor. The second attempt at a hurdle assessment is graded as pass fail. The maximum grade for a second attempt is the hurdle threshold grade.
Regular meetings with thesis supervisor is a hurdle requirement. See details in assessment task description.
Late submissions and Re-submissions
Late submissions will attract a penalty of 10% marks per day. Extenuating circumstances will be considered upon lodgement of a special consideration application.
Resubmissions of work are not allowed after due date.
Assessment Tasks
| Name | Weighting | Hurdle | Due |
|---|---|---|---|
| Preliminary Thesis | 70% | Yes | Week 13 |
| Management and Engagement | 10% | No | All Session |
| Meetings with Supervisors | 0% | Yes | Week 13 |
| Presentation | 20% | No | Week 14-16 |
Preliminary Thesis
Due: Week 13
Weighting: 70%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
Refer to iLearn for guidelines.
On successful completion you will be able to:
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Management and Engagement
Due: All Session
Weighting: 10%
Students are required to actively engage with the project-related activities, and to demonstrate a professional demeanour towards project management and record-keeping. Students are also required to maintain a logbook for this unit, where dated records of day-to-day activities associated with the project are maintained. More guidelines are provided on iLearn.
On successful completion you will be able to:
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Meetings with Supervisors
Due: Week 13
Weighting: 0%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
Students are expected to meet with their supervisor on a weekly basis, once the project commences. Such weekly meetings should aim to seek feedback and steer the project, and would normally last at least 15-30 minutes or more. In order to pass this unit, a student must attend at least 5 out of 10 weekly meetings between Week 4 to Week 12. In case a face-to-face meeting is not possible, a meeting must be conducted using telephone or video-conference. Meetings should be logged using the consultation meeting log sheet provided on iLearn.
On successful completion you will be able to:
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Presentation
Due: Week 14-16
Weighting: 20%
Refer to iLearn for guidelines and schedule.
On successful completion you will be able to:
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Delivery and Resources
Unit Delivery
This is a project-based unit and has no scheduled lectures or tutorial sessions. Special lectures may be organised and related announcements will be made via iLearn.
Logbook
This unit requires a logbook. The students should maintain an individual logbook which should contain a dated log of day-to-day activities undertaken in relation to the project.
Technology Used and Required
The students are required to discuss with their supervisor about the software/hardware resources required for analysis, simulation, testing and experiments related to their project. In addition, word processing software (MS Word, Latex etc.) will be required to produce the preliminary thesis and MS PowerPoint or equivalent software will be required for presentation slides.
Unit Webpage: Access from the online iLearn System at http://ilearn.mq.edu.au
Required and Recommended Texts/Materials
There is not set textbook for this unit. The students are required to discuss with their supervisor regarding required/recommended reading materials, as suited to individual project needs.
Policies and Procedures
Macquarie University policies and procedures are accessible from Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central). Students should be aware of the following policies in particular with regard to Learning and Teaching:
- Academic Appeals Policy
- Academic Integrity Policy
- Academic Progression Policy
- Assessment Policy
- Fitness to Practice Procedure
- Grade Appeal Policy
- Complaint Management Procedure for Students and Members of the Public
- Special Consideration Policy (Note: The Special Consideration Policy is effective from 4 December 2017 and replaces the Disruption to Studies Policy.)
Undergraduate students seeking more policy resources can visit the Student Policy Gateway (https://students.mq.edu.au/support/study/student-policy-gateway). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
If you would like to see all the policies relevant to Learning and Teaching visit Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central).
Student Code of Conduct
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/study/getting-started/student-conduct
Results
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
Student Support
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Learning Skills
Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to improve your marks and take control of your study.
Student Services and Support
Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.
Student Enquiries
For all student enquiries, visit Student Connect at ask.mq.edu.au
If you are a Global MBA student contact globalmba.support@mq.edu.au
IT Help
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
Graduate Capabilities
PG - Capable of Professional and Personal Judgment and Initiative
Our postgraduates will demonstrate a high standard of discernment and common sense in their professional and personal judgment. They will have the ability to make informed choices and decisions that reflect both the nature of their professional work and their personal perspectives.
This graduate capability is supported by:
Learning outcomes
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Assessment tasks
- Preliminary Thesis
- Management and Engagement
- Meetings with Supervisors
- Presentation
PG - Discipline Knowledge and Skills
Our postgraduates will be able to demonstrate a significantly enhanced depth and breadth of knowledge, scholarly understanding, and specific subject content knowledge in their chosen fields.
This graduate capability is supported by:
Learning outcomes
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Assessment tasks
- Preliminary Thesis
- Management and Engagement
- Meetings with Supervisors
- Presentation
PG - Critical, Analytical and Integrative Thinking
Our postgraduates will be capable of utilising and reflecting on prior knowledge and experience, of applying higher level critical thinking skills, and of integrating and synthesising learning and knowledge from a range of sources and environments. A characteristic of this form of thinking is the generation of new, professionally oriented knowledge through personal or group-based critique of practice and theory.
This graduate capability is supported by:
Learning outcomes
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Assessment tasks
- Preliminary Thesis
- Management and Engagement
- Meetings with Supervisors
- Presentation
PG - Research and Problem Solving Capability
Our postgraduates will be capable of systematic enquiry; able to use research skills to create new knowledge that can be applied to real world issues, or contribute to a field of study or practice to enhance society. They will be capable of creative questioning, problem finding and problem solving.
This graduate capability is supported by:
Learning outcomes
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Assessment tasks
- Preliminary Thesis
- Management and Engagement
- Meetings with Supervisors
- Presentation
PG - Effective Communication
Our postgraduates will be able to communicate effectively and convey their views to different social, cultural, and professional audiences. They will be able to use a variety of technologically supported media to communicate with empathy using a range of written, spoken or visual formats.
This graduate capability is supported by:
Learning outcomes
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Assessment tasks
- Preliminary Thesis
- Management and Engagement
- Meetings with Supervisors
- Presentation
PG - Engaged and Responsible, Active and Ethical Citizens
Our postgraduates will be ethically aware and capable of confident transformative action in relation to their professional responsibilities and the wider community. They will have a sense of connectedness with others and country and have a sense of mutual obligation. They will be able to appreciate the impact of their professional roles for social justice and inclusion related to national and global issues
This graduate capability is supported by:
Learning outcomes
- Demonstrate intellectual independence and an in-depth understanding of a specialist topic within the required engineering discipline, through verbal and written communication.
- Apply core required engineering discipline principles and practices to a research or industry challenge.
- Plan a major engineering research project, including the design of necessary processes, information management, records keeping, project management, and communications.
- Analyse a complex engineering problem, and propose solutions involving the development of new knowledge or the application of cutting edge techniques.
- Demonstrate an advanced knowledge of contextual factors, research direction, and foundational concepts in required engineering discipline.
Assessment tasks
- Preliminary Thesis
- Management and Engagement
- Meetings with Supervisors
- Presentation