Unit convenor and teaching staff |
Unit convenor and teaching staff
Convenor
Nicholas Tse
Contact via 9850 9075
50 Waterloo Road
Tue & Wed (or by appointment)
Co-convenor
Rex Di Bona
Contact via 9850 4242
50 Waterloo Road
Tue & Wed (or by appointment)
|
---|---|
Credit points |
Credit points
4
|
Prerequisites |
Prerequisites
Admission to MEng
|
Corequisites |
Corequisites
|
Co-badged status |
Co-badged status
ENGG600
|
Unit description |
Unit description
This unit develops skills required for professional practice in engineering, particularly self-learning, collaborative problem solving, and communication. The vehicles for skills development include a research project, written report and oral presentation.
|
Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates
On successful completion of this unit, you will be able to:
Conditions required to pass the unit:
Grading and passing requirement for unit
In order to pass this unit a student must obtain a mark of 50% or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).
For further details about grading, please refer to the policies and procedures section below.
Hurdle Requirements
The A0. Workshop Participation is a hurdle requirement. Attendance of at least 10 out of 13 workshop sessions to pass this unit.
Late submissions and Resubmissions
Late submissions will attract a penalty of 50% deduction per day. Extenuating circumstances will be considered upon lodgment of an application for special consideration.
Resubmissions of work are not allowed.
Name | Weighting | Hurdle | Due |
---|---|---|---|
A0. Workshop Participation | 0% | Yes | On going |
A1. Weekly Submission Tasks | 10% | No | On going |
A2.Team management/integration | 8% | No | Week 13 |
A4. Reflection journal entries | 10% | No | Week 7 and 13 |
A5. Perspective essay | 10% | No | Week 9 |
A6. Final presentation | 10% | No | Week 13 |
A7. Requirements Document | 20% | No | Week 4 |
A8. Testing Document | 10% | No | Week 8 |
A9. Final Project Document | 22% | No | Week 14 |
Due: On going
Weighting: 0%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)
This is a pass/fail hurdle assessment: active participation to workshop and team project is a mandatory requirement of passing this unit. In class participation of at least 10/13 classes is required.
Due: On going
Weighting: 10%
Weekly Submission Tasks required by students on an ongoing base. This will show participation in workshop activities, commitment to the semester-long project and accountability to the team.
The tasks will range from pre-class activities and preparations to agreed deliverables.
More detail of week to week tasks will be available on iLearn.
Due: Week 13
Weighting: 8%
The success of the overall engineering project challenge that is related to the management and integration will be assessed by the tutors and Domain Experts. This will be conducted at the end of the semester via an oral defence and project demonstration.
Further information will be provided on iLearn
Due: Week 7 and 13
Weighting: 10%
A total of 4 professional reflection documents will be expected at two submission time points. These reflections should be a summary and an introspective evaluation of learnt lessons around professional development during that time period.
It is advised that an A4 bound log book is used for general record keeping.
Further information will be provided on iLearn
Due: Week 9
Weighting: 10%
A perspective/opinion piece is required on a given topic assigned.
Further information will be provided on iLearn.
Due: Week 13
Weighting: 10%
Oral exam on the final engineering project. This will be conducted at the final project demonstration and examined by the tutors and Domain Experts.
Further information will be provided on iLearn.
Due: Week 4
Weighting: 20%
This is a submittable task by the team listing the specification requirements for the semester-long project. Contirubtion by all members need to be clearly documented and contribution will be evaluated in conjunction with using the SPARKPLUS platform.
Further information will be provided on iLearn.
Due: Week 8
Weighting: 10%
This is an extension on the A7. submitted task for the semester-long project. Contirubtion by all members need to be clearly documented and contribution will be evaluated in conjunction with using the SPARKPLUS platform.
Further information will be provided on iLearn.
Due: Week 14
Weighting: 22%
Combine all your reports, plus those from your team, to create the final document that comprehensively describes your engineering project. Contirubtion by all members need to be clearly documented and contribution will be evaluated in conjunction with using the SPARKPLUS platform.
Further marking rubric for this activity item will be provided on iLearn.
ENGG300 is a continuation of the ENGG Spine Units. It aims to continue the scaffolded development that began in ENGG100 on the transferable professional skills. In this unit, students are expected to make use of all the resourced presented in the ENGG spine units which include materials presented in ENGG100 and ENGG200 to assist them with achieving the learning outcomes of this Unit.
Recommended and/or Required Texts
Students are required
Recommended texts:
Students will require a scientific or engineering calculator.
Refer to iLearn and lecture notes for the unit schedule.
Macquarie University policies and procedures are accessible from Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central). Students should be aware of the following policies in particular with regard to Learning and Teaching:
Undergraduate students seeking more policy resources can visit the Student Policy Gateway (https://students.mq.edu.au/support/study/student-policy-gateway). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.
If you would like to see all the policies relevant to Learning and Teaching visit Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central).
Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/study/getting-started/student-conduct
Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au
Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/
Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to improve your marks and take control of your study.
Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.
For all student enquiries, visit Student Connect at ask.mq.edu.au
If you are a Global MBA student contact globalmba.support@mq.edu.au
For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/.
When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.
Our graduates will also be capable of creative thinking and of creating knowledge. They will be imaginative and open to experience and capable of innovation at work and in the community. We want them to be engaged in applying their critical, creative thinking.
This graduate capability is supported by:
We want our graduates to have emotional intelligence and sound interpersonal skills and to demonstrate discernment and common sense in their professional and personal judgement. They will exercise initiative as needed. They will be capable of risk assessment, and be able to handle ambiguity and complexity, enabling them to be adaptable in diverse and changing environments.
This graduate capability is supported by:
Our graduates will have enquiring minds and a literate curiosity which will lead them to pursue knowledge for its own sake. They will continue to pursue learning in their careers and as they participate in the world. They will be capable of reflecting on their experiences and relationships with others and the environment, learning from them, and growing - personally, professionally and socially.
This graduate capability is supported by:
Our graduates will take with them the intellectual development, depth and breadth of knowledge, scholarly understanding, and specific subject content in their chosen fields to make them competent and confident in their subject or profession. They will be able to demonstrate, where relevant, professional technical competence and meet professional standards. They will be able to articulate the structure of knowledge of their discipline, be able to adapt discipline-specific knowledge to novel situations, and be able to contribute from their discipline to inter-disciplinary solutions to problems.
This graduate capability is supported by:
We want our graduates to be capable of reasoning, questioning and analysing, and to integrate and synthesise learning and knowledge from a range of sources and environments; to be able to critique constraints, assumptions and limitations; to be able to think independently and systemically in relation to scholarly activity, in the workplace, and in the world. We want them to have a level of scientific and information technology literacy.
This graduate capability is supported by:
Our graduates should be capable of researching; of analysing, and interpreting and assessing data and information in various forms; of drawing connections across fields of knowledge; and they should be able to relate their knowledge to complex situations at work or in the world, in order to diagnose and solve problems. We want them to have the confidence to take the initiative in doing so, within an awareness of their own limitations.
This graduate capability is supported by:
We want to develop in our students the ability to communicate and convey their views in forms effective with different audiences. We want our graduates to take with them the capability to read, listen, question, gather and evaluate information resources in a variety of formats, assess, write clearly, speak effectively, and to use visual communication and communication technologies as appropriate.
This graduate capability is supported by:
As local citizens our graduates will be aware of indigenous perspectives and of the nation's historical context. They will be engaged with the challenges of contemporary society and with knowledge and ideas. We want our graduates to have respect for diversity, to be open-minded, sensitive to others and inclusive, and to be open to other cultures and perspectives: they should have a level of cultural literacy. Our graduates should be aware of disadvantage and social justice, and be willing to participate to help create a wiser and better society.
This graduate capability is supported by:
We want our graduates to be aware of and have respect for self and others; to be able to work with others as a leader and a team player; to have a sense of connectedness with others and country; and to have a sense of mutual obligation. Our graduates should be informed and active participants in moving society towards sustainability.
This graduate capability is supported by:
Similar to the offering in 2018 S2, the unit is conducted in a vertically integrated project-based learning environment. where students work with multidisciplinary teams to imagine, design, develop, iterate, test and built a real-world solution to a given engineering challenge.
Changes this year include: