Students

ELEC295 – Fundamentals of Energy Conversion and Storage

2019 – S1 Day

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff Lecturer
Jahangir Hossain
Contact via 2229
44 WR 107
Thursday 11.00 AM-1.00 PM
Lab Technician
Amir Safari
Contact via 9162
44 WR
Credit points Credit points
3
Prerequisites Prerequisites
(MATH132 or MATH135) and ((PHYS106 and PHYS107) or (PHYS140 and PHYS143))
Corequisites Corequisites
Co-badged status Co-badged status
Unit description Unit description
This unit develops fundamental knowledge and skills in the area of energy conversion and storage technologies and their applications. Foundation knowledge and skill in physics and mathematics is assumed. Topics covered include: Forms of energy - electric, magnetic, chemical, thermal, pneumatic, kinetic, etc. Sources of energy (especially renewable energy) - photovoltaics, wind generation, fuel cells, etc. Energy conversion - methods, efficiency, limitations. Storage of energy - batteries, supercapacitors, thermal energy, mechanical energy, embodied energy, etc. The concepts studied in this unit, and the knowledge and skills gained, are required in advanced units in the area of electrical and/or energy systems engineering.

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • Describe physical basis for, and associated performance characteristics of, various energy conversion and storage technologies.
  • Outline the safety, and economic issues concerning energy technology and systems.
  • Identify, formulate and provide solutions to complex problems with intellectual independence for finding the performance of energy conversion from one form to another.
  • Analyse energy conversion and storage systems in terms of accepted performance parameters.
  • Evaluate energy conversion and storage requirements and design or select suitable solutions to those requirements

General Assessment Information

 

Conditions required to pass the unit: e. g.: Grading and passing requirement for unit

In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD). For further details about grading, please refer below in the policies and procedures section.

If you receive special consideration for the final exam, a supplementary exam will be scheduled in the supplementary examination period (currently 15-19 July 2019). By making a special consideration application for the final exam you are declaring yourself available for a resit during the supplementary examination period and will not be eligible for a second special consideration approval based on pre-existing commitments. Please ensure you are familiar with the policy prior to submitting an application. Approved applicants will receive an individual notification one week prior to the exam with the exact date and time of their supplementary examination.

Hurdle Requirements

The final examination is a hurdle requirement. A grade of 40%  or more in the final examination is a condition of passing this unit. If you are given a second opportunity to sit the final examination as a result of failing to meet the minimum mark required, you will be offered that chance during the supplementary examination period and will be notified of the exact day and time after the publication of final results for the unit. The second attempt at a hurdle assessment is graded as pass fail. The maximum grade for a second attempt is the hurdle threshold grade.

Late submissions and Resubmissions

Late submissions will attract a penalty of 10/100, 10% marks per day. Extenuating circumstances will be considered upon lodgment of a formal notice of disruption of studies.

Resubmissions of work are not allowed.

 

Assessment Tasks

Name Weighting Hurdle Due
Tutorial 20% No At the end of tutorial session
Laboratory 20% No 4 PM Friday, next week
Quiz 10% No During lecture time
Final Exam 50% Yes Examination period

Tutorial

Due: At the end of tutorial session
Weighting: 20%

There are six tutorial sessions throughout the semester including the review one (last tutorial). In each tutorial you will solve several problems. A few example questions will be solved interactively by the lecturer in the scheduled tutorial class. You will be asked to solve remaining questions either individually or as a group. You will submit the solution document to the lecturer at the end of the class. The problems will be designed to help you enhance your understanding of the topics covered in lectures and provide you with an opportunity to apply the knowledge you have learned from lectures to solve practical problems.  

Each tutorial is worth 4% and you will loose that mark if you dont attend in the tutorial session. In the tutorial class you will analyze the performance characteristics of various energy conversion and storage technologies. Criteria & Marking: (i) calculation accuracy; (ii) communications of assumptions; (iii) methodology; (iv) completeness. Feedback will be provided in the next tutorial class. Detail of the marking criteria will also be notified on iLearn.


On successful completion you will be able to:
  • Identify, formulate and provide solutions to complex problems with intellectual independence for finding the performance of energy conversion from one form to another.
  • Analyse energy conversion and storage systems in terms of accepted performance parameters.
  • Evaluate energy conversion and storage requirements and design or select suitable solutions to those requirements

Laboratory

Due: 4 PM Friday, next week
Weighting: 20%

The laboratories are strongly recommended; attendance, participation, and completion of all the laboratory activities are required in order to satisfactorily complete the course. You are required to record all the laboratory results (and printouts) and submit a complete report for each experiment. Completion of a laboratory activity is determined by having the laboratory tutor sign off the student log book, nominally at the end of the laboratory class.

Criteria & Marking: (i) design decision, (ii) completeness (iii) analyse results, (iv) accuracy and (v) structure and quality of the report. Detail of the marking criteria will also be notified on iLearn.


On successful completion you will be able to:
  • Outline the safety, and economic issues concerning energy technology and systems.
  • Analyse energy conversion and storage systems in terms of accepted performance parameters.
  • Evaluate energy conversion and storage requirements and design or select suitable solutions to those requirements

Quiz

Due: During lecture time
Weighting: 10%

During 'lecture' times in the classroom each week, you will be asked a series of questions which will reflect work in class (calculations, review of taught material, etc.) or reading assignments between classes. You will give your answer using the clickers.


On successful completion you will be able to:
  • Describe physical basis for, and associated performance characteristics of, various energy conversion and storage technologies.

Final Exam

Due: Examination period
Weighting: 50%
This is a hurdle assessment task (see assessment policy for more information on hurdle assessment tasks)

The final exam will cover all of the course content. This will be a closed book exam, and involve short answers and problem solving. The duration of the exam will be 3 hours. This is an hurdle exam and to receive a passing grade, the student must achieve at least 40% in the final exam and an aggregate mark of at least 50% overall.


On successful completion you will be able to:
  • Evaluate energy conversion and storage requirements and design or select suitable solutions to those requirements

Delivery and Resources

-Aldo Vieira da Rosa, Fundamentals of Renewable Energy Processes, Third Edition, Academic Press (Elsevier), ISBN: 978-0-12-397219-4

- Fuchs and Masoum, Power Conversion of Renewable Energy Systems. Springer 2011, ISBN 978-1-4419-7979-7.

Unit Schedule

For details, please refer to the Unit Schedule on the ELEC295 iLearn webpage.

Learning and Teaching Activities

Unit Schedule

Weekly learning and teaching topics and activities are outlined in the Unit Schedule, together with relevant sections of the text and references.

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Undergraduate students seeking more policy resources can visit the Student Policy Gateway (https://students.mq.edu.au/support/study/student-policy-gateway). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

If you would like to see all the policies relevant to Learning and Teaching visit Policy Central (https://staff.mq.edu.au/work/strategy-planning-and-governance/university-policies-and-procedures/policy-central).

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/study/getting-started/student-conduct​

Results

Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

Learning Skills

Learning Skills (mq.edu.au/learningskills) provides academic writing resources and study strategies to improve your marks and take control of your study.

Student Services and Support

Students with a disability are encouraged to contact the Disability Service who can provide appropriate help with any issues that arise during their studies.

Student Enquiries

For all student enquiries, visit Student Connect at ask.mq.edu.au

If you are a Global MBA student contact globalmba.support@mq.edu.au

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.

Graduate Capabilities

Creative and Innovative

Our graduates will also be capable of creative thinking and of creating knowledge. They will be imaginative and open to experience and capable of innovation at work and in the community. We want them to be engaged in applying their critical, creative thinking.

This graduate capability is supported by:

Learning outcome

  • Analyse energy conversion and storage systems in terms of accepted performance parameters.

Assessment tasks

  • Laboratory
  • Final Exam

Capable of Professional and Personal Judgement and Initiative

We want our graduates to have emotional intelligence and sound interpersonal skills and to demonstrate discernment and common sense in their professional and personal judgement. They will exercise initiative as needed. They will be capable of risk assessment, and be able to handle ambiguity and complexity, enabling them to be adaptable in diverse and changing environments.

This graduate capability is supported by:

Learning outcome

  • Evaluate energy conversion and storage requirements and design or select suitable solutions to those requirements

Discipline Specific Knowledge and Skills

Our graduates will take with them the intellectual development, depth and breadth of knowledge, scholarly understanding, and specific subject content in their chosen fields to make them competent and confident in their subject or profession. They will be able to demonstrate, where relevant, professional technical competence and meet professional standards. They will be able to articulate the structure of knowledge of their discipline, be able to adapt discipline-specific knowledge to novel situations, and be able to contribute from their discipline to inter-disciplinary solutions to problems.

This graduate capability is supported by:

Learning outcome

  • Describe physical basis for, and associated performance characteristics of, various energy conversion and storage technologies.

Assessment tasks

  • Quiz
  • Final Exam

Critical, Analytical and Integrative Thinking

We want our graduates to be capable of reasoning, questioning and analysing, and to integrate and synthesise learning and knowledge from a range of sources and environments; to be able to critique constraints, assumptions and limitations; to be able to think independently and systemically in relation to scholarly activity, in the workplace, and in the world. We want them to have a level of scientific and information technology literacy.

This graduate capability is supported by:

Learning outcomes

  • Identify, formulate and provide solutions to complex problems with intellectual independence for finding the performance of energy conversion from one form to another.
  • Evaluate energy conversion and storage requirements and design or select suitable solutions to those requirements

Assessment tasks

  • Tutorial
  • Final Exam

Problem Solving and Research Capability

Our graduates should be capable of researching; of analysing, and interpreting and assessing data and information in various forms; of drawing connections across fields of knowledge; and they should be able to relate their knowledge to complex situations at work or in the world, in order to diagnose and solve problems. We want them to have the confidence to take the initiative in doing so, within an awareness of their own limitations.

This graduate capability is supported by:

Learning outcome

  • Identify, formulate and provide solutions to complex problems with intellectual independence for finding the performance of energy conversion from one form to another.

Assessment tasks

  • Tutorial
  • Final Exam

Effective Communication

We want to develop in our students the ability to communicate and convey their views in forms effective with different audiences. We want our graduates to take with them the capability to read, listen, question, gather and evaluate information resources in a variety of formats, assess, write clearly, speak effectively, and to use visual communication and communication technologies as appropriate.

This graduate capability is supported by:

Learning outcomes

  • Describe physical basis for, and associated performance characteristics of, various energy conversion and storage technologies.
  • Analyse energy conversion and storage systems in terms of accepted performance parameters.

Assessment tasks

  • Laboratory
  • Final Exam

Engaged and Ethical Local and Global citizens

As local citizens our graduates will be aware of indigenous perspectives and of the nation's historical context. They will be engaged with the challenges of contemporary society and with knowledge and ideas. We want our graduates to have respect for diversity, to be open-minded, sensitive to others and inclusive, and to be open to other cultures and perspectives: they should have a level of cultural literacy. Our graduates should be aware of disadvantage and social justice, and be willing to participate to help create a wiser and better society.

This graduate capability is supported by:

Assessment task

  • Laboratory

Socially and Environmentally Active and Responsible

We want our graduates to be aware of and have respect for self and others; to be able to work with others as a leader and a team player; to have a sense of connectedness with others and country; and to have a sense of mutual obligation. Our graduates should be informed and active participants in moving society towards sustainability.

This graduate capability is supported by:

Learning outcome

  • Outline the safety, and economic issues concerning energy technology and systems.

Changes from Previous Offering

 The feedback from previous cohort of students were that they would benefit from providing examples and formulas on the tutorial documents. The convenor has revised the tutorial documents and will make available in due time.