Students

ENGG8401 – Safety and Risk Engineering

2023 – Session 1, In person-scheduled-weekday, North Ryde

General Information

Download as PDF
Unit convenor and teaching staff Unit convenor and teaching staff Unit Convener
Rouzbeh Abbassi
rouzbeh.abbassi@mq.edu.au
Contact via 0298509224
Room 107, 44 Waterloo Rd
With previous appointment via email
Credit points Credit points
10
Prerequisites Prerequisites
Admission to MEngEnvSafetyEng or MEngMgt
Corequisites Corequisites
Co-badged status Co-badged status
Unit description Unit description

The objective of this unit is to provide an understanding of principles and methods of safety and risk engineering applicable to industrial operation. Specific topics include analysis of past accidents; risk assessment methods, risk analysis tools, risk-based decision making, process safety, engineering safety, occupational safety, safety assessment studies, and regulatory perspective of safety.

Important Academic Dates

Information about important academic dates including deadlines for withdrawing from units are available at https://www.mq.edu.au/study/calendar-of-dates

Learning Outcomes

On successful completion of this unit, you will be able to:

  • ULO1: Demonstrate advanced knowledge of risk and safety engineering.
  • ULO2: Interpret and synthesise various methodologies and tools applicable in risk analysis and accident modelling.
  • ULO3: Critically review safety performance in a range of engineering operations.
  • ULO4: Apply risk-based design decision methods to industrial operations.
  • ULO5: Design risk-based safety measures for complex engineering operations.

General Assessment Information

In order to pass this unit a student must obtain a mark of 50 or more for the unit (i.e. obtain a passing grade P/ CR/ D/ HD).

For further details about grading, please refer below in the policies and procedures section.

Online quizzes, in-class activities, or scheduled tests and exam must be undertaken at the time indicated in the unit guide. Should these activities be missed due to illness or misadventure, students may apply for Special Consideration.

All other assessments must be submitted by 5:00 pm on their due date.

Assessments not submitted by the due date will receive a mark of zero.

If you receive special consideration for the final exam, a supplementary exam will be scheduled by the faculty during a supplementary exam period, typically about 3 to 4 weeks after the normal exam period. By making a special consideration application for the final exam you are declaring yourself available for a resit during the supplementary examination period and will not be eligible for a second special consideration approval based on pre-existing commitments. Please ensure you are familiar with the policy prior to submitting an application. Approved applicants will receive an individual notification one week prior to the exam with the exact date and time of their supplementary examination.

Special Consideration

The Special Consideration Policy aims to support students who have been impacted by short-term circumstances or events that are serious, unavoidable and significantly disruptive, and which may affect their performance in assessment. If you experience circumstances or events that affect your ability to complete the written assessments in this unit on time, please inform the convenor and submit a Special Consideration request through ask.mq.edu.au.

Assessment Tasks

Name Weighting Hurdle Due
Term Project 50% No Week 13
Mid-term 20% No Week 7
Final Exam 30% No TBA

Term Project

Assessment Type 1: Project
Indicative Time on Task 2: 81 hours
Due: Week 13
Weighting: 50%

 

This is a group term project. Students are going to work on the project from the beginning of the semester. Each group will work on safety and risk engineering applications with a focus on a particular industry (e.g. oil and gas, mining, cement, etc.). Students will receive feedback on their progress to achieve each individual learning outcome during the semester. This will happen by breaking the project to different tasks by the lecturer (considering each individual learning outcome), and assess the project based on achieving the leaning outcomes individually.

 
On successful completion you will be able to:
  • Demonstrate advanced knowledge of risk and safety engineering.
  • Interpret and synthesise various methodologies and tools applicable in risk analysis and accident modelling.
  • Critically review safety performance in a range of engineering operations.
  • Apply risk-based design decision methods to industrial operations.
  • Design risk-based safety measures for complex engineering operations.

Mid-term

Assessment Type 1: Quiz/Test
Indicative Time on Task 2: 2 hours
Due: Week 7
Weighting: 20%

 

Students will be assessed at the mid of the semester. This will be an open book exam for 2 hours.

 
On successful completion you will be able to:
  • Demonstrate advanced knowledge of risk and safety engineering.
  • Interpret and synthesise various methodologies and tools applicable in risk analysis and accident modelling.
  • Critically review safety performance in a range of engineering operations.
  • Apply risk-based design decision methods to industrial operations.
  • Design risk-based safety measures for complex engineering operations.

Final Exam

Assessment Type 1: Examination
Indicative Time on Task 2: 2 hours
Due: TBA
Weighting: 30%

 

This will be a 2 hrs open book exam.

 
On successful completion you will be able to:
  • Demonstrate advanced knowledge of risk and safety engineering.
  • Interpret and synthesise various methodologies and tools applicable in risk analysis and accident modelling.
  • Critically review safety performance in a range of engineering operations.
  • Apply risk-based design decision methods to industrial operations.
  • Design risk-based safety measures for complex engineering operations.

1 If you need help with your assignment, please contact:

  • the academic teaching staff in your unit for guidance in understanding or completing this type of assessment
  • the Writing Centre for academic skills support.

2 Indicative time-on-task is an estimate of the time required for completion of the assessment task and is subject to individual variation

Delivery and Resources

On-campus learning activities start in week 2.

Teaching materials including lecture notes and slides provided by the instructor. Please refer to ILearn for further information. 

 

Unit Schedule

Please refer to ILearn. 

Policies and Procedures

Macquarie University policies and procedures are accessible from Policy Central (https://policies.mq.edu.au). Students should be aware of the following policies in particular with regard to Learning and Teaching:

Students seeking more policy resources can visit Student Policies (https://students.mq.edu.au/support/study/policies). It is your one-stop-shop for the key policies you need to know about throughout your undergraduate student journey.

To find other policies relating to Teaching and Learning, visit Policy Central (https://policies.mq.edu.au) and use the search tool.

Student Code of Conduct

Macquarie University students have a responsibility to be familiar with the Student Code of Conduct: https://students.mq.edu.au/admin/other-resources/student-conduct

Results

Results published on platform other than eStudent, (eg. iLearn, Coursera etc.) or released directly by your Unit Convenor, are not confirmed as they are subject to final approval by the University. Once approved, final results will be sent to your student email address and will be made available in eStudent. For more information visit ask.mq.edu.au or if you are a Global MBA student contact globalmba.support@mq.edu.au

Academic Integrity

At Macquarie, we believe academic integrity – honesty, respect, trust, responsibility, fairness and courage – is at the core of learning, teaching and research. We recognise that meeting the expectations required to complete your assessments can be challenging. So, we offer you a range of resources and services to help you reach your potential, including free online writing and maths support, academic skills development and wellbeing consultations.

Student Support

Macquarie University provides a range of support services for students. For details, visit http://students.mq.edu.au/support/

The Writing Centre

The Writing Centre provides resources to develop your English language proficiency, academic writing, and communication skills.

The Library provides online and face to face support to help you find and use relevant information resources. 

Student Services and Support

Macquarie University offers a range of Student Support Services including:

Student Enquiries

Got a question? Ask us via AskMQ, or contact Service Connect.

IT Help

For help with University computer systems and technology, visit http://www.mq.edu.au/about_us/offices_and_units/information_technology/help/. 

When using the University's IT, you must adhere to the Acceptable Use of IT Resources Policy. The policy applies to all who connect to the MQ network including students.

Unit information based on version 2023.02 of the Handbook